Crestron. |
| Class | Description | |
|---|---|---|
| AdvDimmer | Crestron device that controls Dimmable loads and contains feedbacks and buttons. | |
| AdvSwitch | Crestron device that controls switched loads and contains feedback | |
| AdvSwitchWithButton | Crestron device that controls switched loads also contains Button and feedback. | |
| BasicDimmingLoad | Base class for EX Dimmer Loads. | |
| Clc1dimflv2ex24v | CLC-1DIMFLV2EX-24V Wireless In-Ceiling 0-10V Dimmer, for 24VDC Applications. | |
| Clc1dimflv2ex24vButtonSettings | Class to specify the parameters of the button functions when the unit is in remote mode. | |
| Clc1dimflv2ex24vDimLoad | Load for Clc1dimflv2ex24vDimLoad devices. | |
| Clc1dimflv2ex24vUISettings | Class to specify the parameters of the user interface for CLC1DimFlv2Ex24v devices. | |
| Clc1LedpwmRgbwGenericEx |
The CLC-1LED-PWM-RGBW-Generic is a 4 channel PWM dimmer, designed to drive LED (strip) loads. It is composed of 4 independent
PWM output channels in a single module. Each channel supports a 1 Amp load where the total module rating is 4 Amps.
This class will trigger BaseEvent event. | |
| ClcButtonSettings | Class to specify the parameters of the button functions when the unit is in remote mode. | |
| ClcDimLoad | Load for CLC and CLCI devices. | |
| ClcDimUISettings | Class to specify the parameters of the user interface for CLC dimmer devices. | |
| ClcFandelvex | The ClcFandelvex is a ceiling module that provides fan speed control with Extra Low Voltage Dimming. This class will fire the BaseEvent and the OnLoadStateChange(LoadEventArgs) event handler. | |
| ClcfDimuexDimLoad | Load for ClcfDimuExDimLoad devices. | |
| Clci1dimflv2ex | Wireless 2-channel 0-10 Volt dimmer, 230VAC. | |
| Clci1sw2ex | CLCI-1SW2EX 2-channel lighting switch that communicates using the infiNET EX wireless protocol | |
| ClciDimuex | CLCI-DIMUEX Wireless In-Ceiling Dimmer, 230VAC | |
| ClciMcex |
CLCI-MCEX is Shutter Raise/Lower Controller that communicates using the infiNET EX wireless protocol
This class will trigger BaseEvent event. | |
| ClciMcexClciMcexMotorController |
Motor Controller Class for ClciMcex.
This class will trigger BaseEvent event. | |
| ClciSwitch | Base class for CLCI switches. | |
| ClciSwitchedLoad | Specific load type used on CLCI switch devices. | |
| ClcUISettings | Class to specify the parameters of the user interface for CLC devices. | |
| ClcwBase | Base class for CLC or CLW lighting devices. | |
| ClDimmer | Base class for CLC Dimmer devices. | |
| ClDimuex | Base class for Cl dimmer devices. | |
| ClfiLDimuex | CLFI-LDIMUEX plug-in, single-channel lighting dimmer , 230VAC | |
| ClfLdimuex | CLF-LDIMUEX compact, single-channel lighting dimmer that communicates using the infiNET EX wireless protocol. | |
| ClsC6 |
An iLux Integrated Lighting System.
This class will trigger BaseEvent, SceneControlChange, LoadSettingsChange, ButtonStateChange, LoadStateChange and SceneProgrammingStateChange events. | |
| ClsC6M |
An iLux Integrated Lighting System with Motion Detector.
This class will trigger BaseEvent, SceneControlChange, LoadSettingsChange, ButtonStateChange, LoadStateChange and SceneProgrammingStateChange events. | |
| ClsC6xBase |
Base class for CLS-C6 and CLS-C6M iLux Integrated Lighting Systems.
This class will trigger BaseEvent, SceneControlChange, LoadSettingsChange, ButtonStateChange, LoadStateChange and SceneProgrammingStateChange events. | |
| ClsC6xBaseClsC6Combining |
Combining class for ClsC6xBase.
This class will trigger BaseEvent event. | |
| ClsC6xBaseClsC6DaylightHarvesting |
Daylight Harvesting class for ClsC6xBase.
This class will trigger BaseEvent event. | |
| ClsC6xBaseClsC6DaylightHarvestingClsC6DaylightHarvestingLoad |
Daylight Harvesting specific to Load class.
This class will trigger BaseEvent event. | |
| ClsC6xBaseClsC6Dimming |
Dimming Class for ClsC6xBase.
This class will trigger SceneControlChange event. | |
| ClsC6xBaseClsC6LoadSettings |
Load Settings class.
This class will trigger LoadSettingsChange event. | |
| ClsC6xBaseClsC6OccupancySensing |
Occupancy Sensing class for ClsC6xBase.
This class will trigger BaseEvent event with event IDs defined in ClsC6xBase. | |
| ClsC6xBaseClsC6PartitionControl |
Partition Control class.
This class will trigger BaseEvent event. | |
| ClsC6xBaseClsC6Scene |
Scene class for ClsC6xBase.
This class will trigger SceneControlChange event. | |
| ClsC6xBaseClsC6SceneProgramming |
Scene Programming class for ClsC6xBase.
This class will trigger SceneProgrammingStateChange event. | |
| ClsC6xBaseClsC6SceneProgrammingClsC6ProgrammingLoad |
Programming Load class to define scene programming properties specific to Lighting Load and Shade Group Load.
This class will trigger SceneProgrammingStateChange event. | |
| ClsC6xBaseClsC6ShadeController |
Shade Controller Class for ClsC6xBase.
This class will trigger BaseEvent event. | |
| ClSwitchedLoad | Specific load type used on the Clwl Switch devices. | |
| ClwAdvDimLoad | Specific load type used on the CLW-EX Dimmer device. | |
| ClwBasicDimmingLoad | EX load type that contains load parameters. | |
| ClwDelvexE | Cameo Express 120V 230V and 277V ELV dimmers. | |
| ClwDelvexP | Cameo Professional 120V, 230V and 277V ELV dimmers | |
| ClwDimex | Base class for the CLW Dimmer devices. | |
| ClwDimExDimmerRemoteButtonSettings | Class to specify the parameters of the keypad button functions when the unit is in Remote Mode. | |
| ClwDimExDimmerUISettings | Class to specify the parameters of the user interface of this unit. | |
| ClwDimexE | Cameo Express 120V and 230V dimmers | |
| ClwDimexP | Cameo Professional 120V, 230V, and 277V dimmers | |
| ClwDimFlvExP |
1 Channel InfinitEX 0-10v Dimmer designed to drive various 0-10 FLV or LED ballasts.
It also has one switched relay output that may drive various voltage ranges include 120V, 230V, 277V.
This class will trigger BaseEvent, LoadStateChange, ButtonStateChange, PresetChange and LearnableButtonEvent events. | |
| ClwDimFlvExPDimuExLoad | Base class for loads on the ClwDimFlvExP and "ClwDimuEx" Dimmer devices. | |
| ClwDimFlvExPLoad | Specific load type used on the ClwDimFlvExP Dimmer device. | |
| ClwDimmingLoad | Base Load type for the CLW Dimmer devices. | |
| ClwDimswex | Base class for CLW DimSwitch devices. | |
| ClwDimswexE | Cameo Professional 1000W dimmer/switch. | |
| ClwDimswexP | Cameo Express 600W dimmer/switch. | |
| ClwDimuEx | Cameo Express 120V 230V and 277V ELV dimmers. | |
| ClwDimuExLoad | Specific load type used on the "ClwDimuEx" Dimmer device. | |
| Clwi1sw2ex | European Cameo CLWI-1SW2EX Wireless Switch | |
| ClwiDimflvex | Class used for CLWIDimuex dimmers. | |
| ClwiDimmer | Base class for CLWI dimmer devices. | |
| ClwiDimuex | Class used for ClwiDimuex dimmers. | |
| ClwiSwex | European Cameo CLWI-SWEX Wireless Switch | |
| ClwiSwexSwitchLoad | Specific load type used on the CLWI Switch device. | |
| ClwiSwitch | Base class for CLWI Switch devices. | |
| ClwLdimex | Base class for CLW-LDIM devices. | |
| ClwLdimex1 | Crestron Plug-in lamp dimmers that communicate using infiNET wireless. | |
| ClwLdimex2 | Crestron Plug-in lamp dimmers that communicate using infiNET wireless. | |
| ClwLDimLoad | Dimming load for CLW-LDIM devices. | |
| ClwLswex | Base class for Clwl Switch devices. | |
| ClwLswex1 | Cameo CLW-LSWEX-1 Wireless Lamp Switch | |
| ClwLswex2 | Cameo CLW-LSWEX-2 Wireless Lamp Switch | |
| ClwSwex | Base class for CLW Switch devices. | |
| ClwSwexE | Cameo CLW-SWEX-E Wireless In-Wall Switch | |
| ClwSwexP | Cameo CLW-SWEX-P Wireless In-Wall Switch | |
| ClwSwExSwitchRemoteButtonSettings | Class to specify the parameters of the keypad button functions when the unit is in Remote Mode. | |
| ClwSwExSwitchUISettings | Class to specify the parameters of the user interface of this unit. | |
| ClwSwitchLoad | Specific load type used on the CLW-EX Switch device. | |
| Clx1Delv4 | CLX-1DELV4 Cresnet 4 Channel Electronic Low-Voltage Dimmer Module with Single Feed. | |
| Clx1Dim4 | CLX-1DIM4 Cresnet 4 Channel Dimmer Module with Single Feed. | |
| Clx1Dim8 | CLX-1DIM8 Cresnet 8 Channel Dimmer Module with Single Feed. | |
| Clx1DimU4 | 4 channel cresnet constant power universal dimmer CLX-1DIMU4 lighting control module that provides up to 4-channels of dimming Incandescent, Tungsten-Halogen, Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, and Phase Control Dimmable LED type lighting loads | |
| Clx1DimU4Hp | Four channel cresnet constant power universal dimmer. CLX-1DIMU4 High Power lighting control module that provides up to 4-channels of dimming Incandescent, Tungsten-Halogen, Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, and Phase Control Dimmable LED type lighting loads | |
| Clx1Fan4 | CLX-1FAN4 Cresnet 4 Channel Fan Speed Control Module with 1 Feed. Controls up to four ceiling fans. | |
| Clx1Mc4 |
CLX-1MC4 Cresnet 4 Channel Motor Control Module with 1 Feed. Controls up to four (4) bi-directional motors, such as motors that control shades or screens.
This class will trigger BaseEvent event. | |
| Clx2Dim2 | CLX-2DIM2 Cresnet 2 Channel Dimmer Module with 2 Feeds. | |
| Clx2Dim8 | CLX-2DIM8 Cresnet 8 Channel Dimmer Module with 2 Feeds. | |
| Clx2Dimflv8 |
8 Channel cresnet constant power universal dimmer
CLX-2DIMFLV8 lighting control module that provides up to 8-channels of 0-10v dimming.
The 277V version of the DIMFLV product can have a commercial solution for 0-10V.
This class will trigger BaseEvent events. | |
| Clx2DimU8 | 8 channel cresnet constant power universal dimmer CLX-2DIMU8 lighting control module that provides up to 8-channels of dimming Incandescent, Tungsten-Halogen, Magnetic Low Voltage, Dimmable CFL, Electronic Low Voltage, and Phase Control Dimmable LED type lighting loads | |
| Clx4Hsw4 | CLX-4HSW4 Cresnet 4 Channel High-Inrush Current Switch Module with 4 Feeds. | |
| ClxBase | Base class for the CLX device | |
| ClxDimmerBase | CLX Dimmer Devices: Base class for CLX Dimming Devices. The "OnLoadStateChange" is only fired with the LevelInputChangedEventId when the input is ramping. The "OnLoadStateChange" is not fired for any other events for the CLX type devices. | |
| ClxEventIds | Class to define the CLX device Event IDs. | |
| ClxFanLoad | Fan Load Class for CLX/CLC Fan Speed Control Devices. | |
| ClxHswLoad | Switched Load class for CLX High-Inrush Current Switches. | |
| ClxLightingLoad | Lighting Load Base Class for CLX Dimmer Devices. | |
| ClxMotor | Motor Class for CLX Motor Control Modules. | |
| ClxMotorStateInvalidException | The exception that is thrown when user sets invalid value to MotorState parameter. | |
| ClxXDelvYBase | CLX XDelvY Dimmers: Base class for CLX-XDelvY Dimmer Modules. | |
| ClxXDelvYLightingLoad | Lighting Load Class for CLX-XDelvY Dimmer Devices. | |
| ClxXDimYBase | CLX XDimY Dimmers: Base class for CLX-XDimY Dimmer Modules. | |
| ClxXDimYLightingLoad | Lighting Load Class for CLX-XDimY Dimmer Devices. | |
| DaliBallast |
DALI Ballast Class for DinDali2/DinDali2Cresnet Device.
This class will trigger BaseEvent and DinDali2SigEventChange events. | |
| DaliGroup |
DALI Group Class for DinDali2/DinDali2Cresnet Device.
This class will trigger BaseEvent event. | |
| DaliLoop |
DALI Loop Class for DinDali2/DinDali2Cresnet Device.
This class will trigger BaseEvent, DinDali2SigEventChange and OverrideEventHandler events. | |
| Dimmer | Crestron device that controls Dimmable loads. | |
| Din2Mc2 |
Cresnet based 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates.
This class will trigger BaseEvent and OverrideEventHandler events. | |
| Din8Sw8 | DIN-8SW8 device provides 8 high-voltage relays for controlling switched loads such as non-dimmed lighting modules and exhaust fans. | |
| Din8Sw8Base | Base class for the DIN-8SW8 based devices | |
| Din8Sw8i | DIN-8SW8I device provides 8 high-voltage relays for controlling switched loads such as non-dimmed lighting modules and exhaust fans. Also supports 8 digital inputs | |
| DinDali2 |
Ethernet based Digital Addressable Lighting Interface (DALI) with 2 DALI outputs, allowing control
of up to 128 individual DALI ballasts (two 64-ballast networks).
This class will trigger BaseEvent, DinDali2SigEventChange and OverrideEventHandler events. | |
| DinDali2Cresnet |
Cresnet based Digital Addressable Lighting Interface (DALI) with 2 DALI outputs, allowing control
of up to 128 individual DALI ballasts (two 64-ballast networks).
This class will trigger BaseEvent, DinDali2SigEventChange and OverrideEventHandler events. | |
| DinDali2EventArgs | Event arguments class used for DinDali2EventHandler. | |
| DinDli |
Ethernet based lighting device allowing control of up to 64 individual Drivers (one 64-driver network).
This class will trigger BaseEvent, GroupSigEventChange and OverrideEventHandler events. | |
| DinDliBase | Base class for DIN-DLI device classes. | |
| DinDliCresnet |
Cresnet based DLI, allowing control of up to 128 individual Drivers (two 64-driver networks).
This class will trigger BaseEvent, GroupSigEventChange and OverrideEventHandler events. | |
| DinDliDriverReplacement |
DIN-DLI Driver Replacement class.
This class will trigger DriverSigEventChange event. | |
| DinDliSceneConfigOperations |
DIN-DLI Scene Configuration Operations class.
This class will trigger DriverSigEventChange and GroupSigEventChange events. | |
| DinDliSceneRecallSave |
DIN-DLI Scene Recall Save class.
This class will trigger BaseEvent, GroupSigEventChange and OverrideEventHandler events. | |
| DinMotor |
Motor Class for DIN Motor Control Modules.
This class will trigger BaseEvent event of Din2Mc2 that owns it. | |
| DliDriver |
DLI Driver Class for DinDliBase/DinDliCresnet Device. Use the eDriverNumber enum constants
This class will trigger BaseEvent and DriverSigEventChange events. | |
| DliDriverBase |
Base class for DLI Driver Class.
This class will trigger BaseEvent and DriverSigEventChange events. | |
| DliGroup |
DLI Group Class for DinDliBase/DinDliCresnet Device.
This class will trigger BaseEvent event. | |
| DliGroupBase |
Base class for DLI Group Class.
This class will trigger BaseEvent and GroupSigEventChange events. | |
| GlExpBase |
Base class for the GL-EXP Dimmer devices
This class will trigger DimmingLoadStateChange and OverrideEventHandler events. The event Id's are defined in GlExpClxDimBase for the DimmingLoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlExpDimCn |
1 Channel Cresnet dimmer
This class will trigger DimmingLoadStateChange and OverrideEventHandler events. The event Id's are defined in GlExpClxDimBase for the DimmingLoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlExpDimfdbCn |
1 Channel Cresnet 3 wire dimmer
This class will trigger DimmingLoadStateChange and OverrideEventHandler events. The event Id's are defined in GlExpClxDimBase for the DimmingLoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlExpDimflvCn |
1 Channel Cresnet 0-10v dimmer
This class will trigger DimmingLoadStateChange and OverrideEventHandler events. The event Id's are defined in GlExpClxDimBase for the DimmingLoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlExpDimuCn |
1 Channel Cresnet universal dimmer
This class will trigger DimmingLoadStateChange and OverrideEventHandler events. The event Id's are defined in GlExpClxDimBase for the DimmingLoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlExpSwCn |
1 Channel Cresnet switch
This class will trigger LoadStateChange and OverrideEventHandler events. The event Id's are defined in LoadEventIds for the LoadStateChange and eOverrideEvents for the OverrideEventHandler. | |
| GlPacBase | Abstract base class for TriListed GLPAC-DIMFLVx and GLPAC-DIMFLVx-PMs | |
| GlPacCresnetBase | Base class definition for GLPAC-DIMFLV (Cresnet) | |
| GlPacDimFlv4Cresnet |
Class definition for GLPAC-DIMFLV4 (Cresnet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv4Ethernet |
Class definition for GLPAC-DIMFLV4 (Ethernet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv4PmCresnet |
Class definition for GLPAC-DIMFLV4-PM (Cresnet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv4PmEthernet |
Class definition for GLPAC-DIMFLV4-PM (Ethernet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv8Cresnet |
Class definition for GLPAC-DIMFLV8 (Cresnet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv8Ethernet |
Class definition for GLPAC-DIMFLV8 (Ethernet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv8PmCresnet |
Class definition for GLPAC-DIMFLV8-PM (Cresnet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlv8PmEthernet |
Class definition for GLPAC-DIMFLV8-PM (Ethernet).
This class will trigger StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange evnts. | |
| GlPacDimFlvLoad |
Class definition for GLPAC Dimming loads.
This class will trigger the LoadStateChange event. | |
| GlPacDimFlvPmRemoteStandardIsc |
Class definition for GLPAC-DIMFLVx-PM Remote standard intersystems communications.
This class will trigger the StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacDimFlvRemoteStandardIsc |
Class definition for GLPAC-DIMFLVx Remote Standard Intersystems Communication.
This class will trigger the StandardIscPropertyChange, LoadStateChange, SigChange, OverrideEventHandler and StateChange events. | |
| GlPacEthernetBase | Base class definition for GLPAC-DIMFLV (Ethernet) | |
| GlPacEventIds | Event ids for GLPAC | |
| GlPacLoadEventArgs | Event arguments to describe a load change event for GlPacBase. | |
| GlPacPmCresnetBase | Base class definition for GLPAC-DIMFLVX-PM (Cresnet) | |
| GlPacPmEthernetBase | Base class definition for GLPAC-DIMFLVX-PM (Ethernet) | |
| Glpp1DimFlv2CnPm | Crestron Green Light Power Pack, 2-Channel 0-10V Dimmer w/Cresnet and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| Glpp1DimFlv2ExPm | Crestron Green Light Power Pack, 2-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| Glpp1DimFlv3CnPm | Crestron Green Light Power Pack, 3-Channel 0-10V Dimmer w/Cresnet and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| Glpp1DimFlv3ExPm | Crestron Green Light Power Pack, 3-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| Glpp1Sw2Cn | Crestron Green Light Power Pack, 2-Channel Switch w/Cresnet. | |
| Glpp1Sw2Ex | Crestron Green Light Power Pack, 2-Channel Switch w/infiNET EX Wireless. | |
| Glpp1Sw3Cn | Crestron Green Light Power Pack, 3-Channel Switch w/Cresnet. | |
| Glpp1Sw3Ex | Crestron Green Light Power Pack, 3-Channel Switch w/infiNET EX Wireless. | |
| GlppBase | GLPP Devices: Base class for GLPP Series Devices. | |
| GlppDimFlvCnPm | Crestron Green Light Power Pack, 1-Channel 0-10V Dimmer with Cresnet and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| GlppDimFlvExPm | Crestron Green Light Power Pack, 1-Channel 0-10V Dimmer w/infiNET EX Wireless and Built-in Power Monitoring. PresetChange event in LDimming Load class is not applicable for the GLPP Dimming Loads. | |
| GlppDimmerBase | GLPP Dimmers: Base class for GLPP Dimmers. | |
| GlppEventIds | Event Ids that are valid for a GLPP Series devices Sig objects. | |
| GlppLDimmerBase | GLPP Dimmers with LDimming Load: Base class for GLPP Dimmers with LDimming Load. | |
| GlppLightingPresetEventArgs | Event arguments used to determine what lighting preset information has been received from the GLPP device. | |
| GlppLightingPresetObject | Lighting Preset Class to define the common preset sigs for GLPP Series devices. | |
| GlppOccupancySensorIrChangeEventArgs | Arguments to describe the GLPP Occupancy Sensor and IR Settings Sig change. | |
| GlppPhotocellChangeEventArgs | Arguments to describe the GLPP Photocell Settings Sig change. | |
| GlppPhotocellLoad | GLPP Lighting Load Specific Photocell Information Class | |
| GlppSwCn | Crestron Green Light Power Pack, 1-Channel Switch w/Cresnet. | |
| GlppSwEx | Crestron Green Light Power Pack, 1-Channel Switch w/infiNET EX Wireless. | |
| GlppSwitchBase | GLPP Switches: Base class for GLPP Switches. | |
| GlxDim6 |
Crestron Green Light architectural dimming module that features six channels of incandescent, magnetic low-voltage, electronic low-voltage, 2- and 3-wire fluorescent, and LED dimming.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxDimFlv8 |
8 Channel GLX 0-10V Dimmer Module for GLE cabinet installation.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxHsw8 |
Crestron Green Light switching module which features 8 channels of high-inrush power switching with rugged, high-current latching relays for GLE cabinet installation.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| GlxpDimFlv8 |
8-Channel GLXP 0-10V Dimmer Module GLEP or GLEX cabinet installation.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxpHsw12 |
Crestron Green Light switching module which features 12 channels of high-inrush power switching with rugged, high-current latching relays for GLEP cabinet installation.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| GlxpHsw8 |
Crestron Green Light switching module which features 8 channels of high-inrush power switching with rugged, high-current latching relays for GLEP cabinet installation.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| GlxpSw10 |
Crestron Green Light switching module which features 10 channels of power switching with rugged, high-current latching relays for GLEP cabinet installation.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| GlxpSw16 |
Crestron Green Light switching module which features 16 channels of power switching with rugged, high-current latching relays for GLEP cabinet installation.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| Glxx2Dim8 |
Crestron Green Light Express dimming module which features 8 channels of incandescent, magnetic low-voltage, 2- and 3-wire fluorescent, and LED dimming.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxxCrtl |
Crestron Green Light Express control module which controls GLXX-SW8, GLXX-SW16, GLXX-HDSW8, and GLXX-HDSW16 relay modules.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| GlxxDim |
Base class for GLXX Dimmers.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxxDimFlv |
Base class for GLXX FLV Dimmer Modules.
This class will trigger BaseEvent, DimmingLoadStateChange and OverrideEventHandler events. | |
| GlxxDimmingLoad | GLXX Dimming Load class. | |
| GlxxEventId | Class to define the Event IDs for GLX switches and dimmers. | |
| GlxxFlvDimmingLoad | GLXX FLV Dimming Load class. | |
| GlxxFlvDimmingLoadStatusArgs | Event arguments class used for GlxxFlvDimmableLoadEventHandler. | |
| GlxxSw |
Base class for GLXX High-Inrush Switch Modules.
This class will trigger BaseEvent, LoadStateChange and OverrideEventHandler events. | |
| LDimmingLoad | Base class for LDimming Loads | |
| LoadSettingsEventArgs | Event arguments class used for LoadSettingsEventHandler. | |
| MotorBase |
Base class for Motors that are controlled by Motor Control Modules.
This class will trigger BaseEvent event of GenericDevice that owns it. | |
| PhotoCell |
Class definition for Photo Cell.
This class will trigger the StandardIscPropertyChange event. | |
| SceneControlEventArgs | Event arguments class used for SceneControlEventHandler. | |
| SceneProgrammingLoadEventArgs | Event arguments class used for SceneProgrammingLoadEventHandler. | |
| Switch | Crestron Device that controls switched loads. | |
| ZumJBoxDaliGroup | DALI Group class for ZUMLINK JBOX DALI Device. | |
| ZumJBoxDimLoad | Load for ZUMLINK and ZUMNET JBOX Dimmers. | |
| ZumJBoxDimLoadBase | Load for ZUMLINK and ZUMNET JBOX Dimmers. | |
| ZummeshNetbridge |
Locus Network Bridge (ZUMMESH-NETBRIDGE) allows communication between an individual Locus network and a control processor through the InfinetEX network.
This class will trigger BaseEvent event with event IDs defined in ZummeshNetbridge. The Index will indicate the scene number for event ID SceneActiveEventId, In all other cases, it can be ignored. | |
| ZummeshNetbridgeDeviceInfo | Device Info class. | |
| ZummeshNetbridgeZummeshNetbridgeScene |
Scene class.
This class will trigger BaseEvent event with event ID SceneActiveEventId. |
| Interface | Description | |
|---|---|---|
| IPhotoCellCollection | Interface to implement a photo cells collection. |
| Delegate | Description | |
|---|---|---|
| DinDali2EventHandler | Delegate definition for DinDali2SigEventChange event. | |
| GlPacLoadEventHandler | Delegate definition for the GlPac load change event. | |
| GlppLightingPresetEventHandler | Delegate to define the event handler information for the GLPP Device Lighting Preset LastRecallFeedback sig changes. | |
| GlppOccupancySensorIrChangeEventHandler | Delegate definition for the GLPP Occupancy Sensor and IR Settings Sig change event. | |
| GlppPhotocellChangeEventHandler | Delegate definition for the GLPP Photocell Settings Sig change event. | |
| GlxxFlvDimmableLoadEventHandler | Delegate definition for the DimmingLoadStateChange event. | |
| LoadSettingsEventHandler | Delegate definition for the LoadSettingsChange event. | |
| SceneControlEventHandler | Delegate definition for the SceneControlChange event. | |
| SceneProgrammingLoadEventHandler | Delegate definition for the SceneProgrammingStateChange event. |
| Enumeration | Description | |
|---|---|---|
| ClsC6xBaseClsC6SceneProgrammingeClsC6ProgrammingLoadType | Enum to define the Load Types for which the Scene Programming is to be done | |
| ClsC6xBaseeClsC6LoadSettingMode | Enum to define the Load Setting modes for CLS-C6X devices. | |
| ClsC6xBaseeClsC6SceneType | Enum to define scene types. | |
| ClwDimExDimmerRemoteButtonSettingseBargraphBehavior | Enumeration that defines the valid values for the BargraphBehavior Parameter. | |
| DaliBallasteBallastStatus | Enum to define DaliBallast Status bits masks to check the status reported by the 8-bit value. | |
| DaliLoopeCommonControlCommandCodes | Enum to define DALI 3-byte Common Control Command Codes. | |
| DaliLoopeDaliDeviceTypes | Enum to define addresses for different DALI device types (for Controller Type Addressing). | |
| DaliLoopeTwoByteCommandCodes | Enum to define DALI 2-byte Command codes. Based on the address provided for the command the command will be sent to DaliBallast/DaliGroup/All Ballasts. For Direct Arc Power Control command the arc power level shall be provided in place of the command code. Refer the DALI specification "IEC 62386-102 Digital addressable Lighting Interface_General Requirements-Control Gear.pdf" for more details on the following commands. | |
| eCLDeviceStatus | Enumeration to define the various error states from a CL type dimmer | |
| eCLPhaseControl | Enumeration that describes phase control. | |
| eCLWButtonLayout | Enumeration to describe the different valid button layout possible for this device. | |
| eClwFlvStatus | Enum to define error status values for "ClwDimFlvExP" dimmer. | |
| eCLWIButtonLayout | Enumeration to describe the different valid button layout possible for CLWI devices. | |
| eClxFanSpeeds | Enum to define different Fan Speeds for CLX/CLC Fan Loads. | |
| eClxMotorState | Enum to define the CLX and DIN Motor States. | |
| eDimmable | Enumeration to define if the dimmer/load is dimmable. | |
| eDimmerOverrideControl | Enum for the Override Control parameter for Dimmer. | |
| eDimPhaseMode | Universal Basie Dimming Phase Mode | |
| eDimUPhaseMode | Universal Dimming Phase Mode | |
| eDinMotorOverride | Enum to define Override states for DIN Motors. | |
| eDinOverrideControl | Enum to define Override Controls for DIN Motor Control Modules. | |
| eDriverNumber | Enum to define the enum constants to support the 0 based driver numbers throught the DIN-DLI classes. | |
| eGroupNumber | Enum to define the enum constants to support the 0 based group numbers throught the DIN-DLI classes. | |
| eOccupancyActions | Enum to define the actions to be taken when room goes from unoccupied to occupied state. | |
| eRelayOperation | Specifies the operating mode of the 24VDC relay terminal. | |
| eSceneNumber | Enum to define the enum constants to support the 0 based scene numbers throught the DIN-DLI classes. | |
| eVacatingActions | Enum to define the actions to be taken when room goes from occupied to unoccupied state. | |
| eXDelvYCurveTypes | Enumeration that defines the CLX-XDelvY device dimmable curve types. | |
| eXDimYCurveTypes | Enumeration that defines the CLX-XDimY device dimmable curve types. | |
| ZumJBoxDaliGroupeDriverIssue | Enum to define the driver issues. | |
| ZumJBoxDimLoadeZumDimmingCurveType | Enum to define the Dimming Curve Types. | |
| ZumJBoxDimLoadeZumLowVoltageOperatingMode | Enum to define the LV (Low Voltage) Operating Modes. | |
| ZumJBoxDimLoadBaseeDimmerFault | Enum to define the dimmer faults. | |
| ZumJBoxDimLoadBaseeDimmerPhaseFeedbackMode | Enum to define the dimming phase feedback modes. | |
| ZumJBoxDimLoadBaseeDimmerPhaseMode | Enum to define the dimming phase modes. | |
| ZumJBoxDimLoadBaseeZeroCrossMode | Enum to define the zero cross modes. |