Dali |
This class will trigger BaseEvent, DinDali2SigEventChange and OverrideEventHandler events.
public sealed class DaliLoop : ILightLoadOverrideControl
The DaliLoop type exposes the following members.
| Name | Description | |
|---|---|---|
| AllBallastLower | Property to lower the light levels of all the ballasts on the DaliLoop, using the ramp rate defined in the DaliBallast. | |
| AllBallastRaise | Property to raise the light levels of all the ballasts on the DaliLoop, using the ramp rate defined in the DaliBallast. | |
| Ballasts | DALI Ballasts collection. | |
| BroadcastLevelIn | Property to set the brightness level for all ballasts on the DaliLoop. | |
| BusyFeedback |
Property to indicate that the DALI controller is performing search of ballasts connected to
the DaliLoop.
The BaseEvent event will trigger with BusyFeedbackEventId. | |
| ConfigurationReadFeedback |
Property to indicate that the DALI controller is reading configuration parameters (i.e., min/max
and override levels). These parameters are typically set when using the DALI Commissioning Tool.
The BaseEvent event will trigger with ConfigurationReadFeedbackEventId. | |
| DaliBusErrorFeedback |
Property to indicate that an error has been detected on the DaliLoop.
The BaseEvent event will trigger with DaliBusErrorFeedbackEventId. | |
| DeviceLoopIsOn | Returns the DinDali2 and DinDali2Cresnet devices the DaliLoop is on. | |
| FailFeedback |
Property to report if the ballast replacement(s) failed.
The BaseEvent event will trigger with FailFeedbackEventId. | |
| Groups | DALI Groups collection. | |
| InBallastReplacementFeedback |
Property to indicate that ballast replacement is active.
The BaseEvent event will trigger with InBallastReplacementFeedbackEventId. | |
| InExternalOverrideFeedback |
Property to indicate that external override is active.
The OverrideEventHandler event will trigger with External. | |
| InManualOverrideFeedback |
Property to indicate that manual override is active.
The OverrideEventHandler event will trigger with Manual. | |
| Number | DaliLoop number | |
| NumberOfMissingBallastsFeedback |
Property to return the number of missing ballasts after ballast replacement has loaded.
The BaseEvent event will trigger with NumberOfMissingBallastsReceivedEventId. | |
| NumberOfNewBallastsFeedback |
Property to return the number of new DaliBallast after ballast replacement has loaded.
The BaseEvent event will trigger with NumberOfNewBallastsReceivedEventId. | |
| SuccessFeedback |
Property to report if the ballast replacement was successful.
The BaseEvent event will trigger with SuccessFeedbackEventId. | |
| ThreeByteCommandNoResponseFeedback |
Property to indicate that no response has been received after triggering the 3-byte command using
Execute(Byte, Byte, Byte) method.
The BaseEvent event will trigger with ThreeByteCommandNoResponseFeedbackEventId. | |
| ThreeByteCommandResponseFeedback |
8-bit response to the last executed 3-byte command. The high-order byte of the response is
ignored.
The BaseEvent event will trigger with ThreeByteCommandResponseReceivedEventId. | |
| ThreeByteCommandResponseValidFeedback |
Property to indicate that the 3-byte command Response contains valid data. The data is sent from
the other DALI controller in response to an Execute(Byte, Byte, Byte) command.
The BaseEvent event will trigger with ThreeByteCommandResponseValidFeedbackEventId. | |
| TwoByteCommandNoResponseFeedback |
Property to indicate that no response has been received after triggering a 2-byte command using Execute(Byte, Byte).
The BaseEvent event will trigger with TwoByteCommandNoResponseFeedbackEventId. | |
| TwoByteCommandResponseFeedback |
8-bit response to the last executed 2-byte query command. The high-order byte of the response is
ignored.
The BaseEvent event will trigger with TwoByteCommandResponseReceivedEventId. | |
| TwoByteCommandResponseValidFeedback |
Property to indicate that the 2-byte command Response contains valid data.
The BaseEvent event will trigger with TwoByteCommandResponseValidFeedbackEventId. |
| Name | Description | |
|---|---|---|
| BroadcastOff | Method to turn off all the ballasts on the DaliLoop. | |
| DoReplace | Method to do the ballast replacement(s). | |
| EnterManualOverride | Method to enter manual override mode. This recalls the override load levels stored in the DaliBallast. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Execute(Byte, Byte) | Method to send the 2-byte DALI control/query command or special command specified by "paramAddress" (byte 1) and "paramCommandOrData" (byte 2). The commands can be sent to individual DaliBallast/DaliGroup/ all ballasts that are part of the DaliLoop. | |
| Execute(Byte, Byte, Byte) | Method to send the 3-byte DALI command. The DALI command consists of "paramAddress" (byte 1), "paramCommandOrData" (byte 2) and "paramData" (byte 3). | |
| ExitManualOverride | Method to exit manual override mode. This will restore the loads to the non-override states (assuming not also in External override mode). | |
| FlashNext | Method to flash the next new DaliBallast. This flashing DaliBallast can replace a missing DaliBallast by setting a valid Missing Ballast Address and pulsing DoReplace(DaliBallast). | |
| FlashPrevious | Method to flash the DaliBallast which was previously flashing. This flashing DaliBallast can replace a missing DaliBallast by setting a valid Missing Ballast Address and pulsing DoReplace(DaliBallast). | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| StartBallastReplacement | Method to start/enter ballast replacement mode. | |
| StopBallastReplacement | Method to stop/exit ballast replacement mode. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| DinDali2SigEventChange |
Event triggered when the DaliBallast/DaliGroup reports information to the Control System.
Will fire the DinDali2EventArgs with the eventId, the LoopIndex and the ballast/group collection
Valid event IDs are available in DaliLoop | |
| OverrideEventHandler |
Event triggered when the DaliLoop reports Override sig information to the Control System.
Valid event IDs are available in eOverrideEvents. |
| Name | Description | |
|---|---|---|
| BallastLevelOutFeedbackEventId |
The state of LevelFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| BallastStatusReceivedEventId |
The state of StatusFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| BusyFeedbackEventId |
The state of BusyFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ConfigurationReadFeedbackEventId |
The state of ConfigurationReadFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| DaliBusErrorFeedbackEventId |
The state of DaliBusErrorFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FailFeedbackEventId |
The state of FailFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| GroupLevelOutFeedbackEventId |
The state of LevelOutFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| InBallastReplacementFeedbackEventId |
The state of InBallastReplacementFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| InGroupFeedbackEventId |
The state of InGroupFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| LampFailureFeedbackEventId |
The state of LampFailureFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| MissingFeedbackEventId |
The state of MissingFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| NumberOfBallastsPerLoop | Number of DALI Ballasts per DaliLoop. | |
| NumberOfGroups | Number of DALI Ballast Groups per DaliLoop. | |
| NumberOfMissingBallastsReceivedEventId |
The state of NumberOfMissingBallastsFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| NumberOfNewBallastsReceivedEventId |
The state of NumberOfNewBallastsFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| PowerFeedbackEventId |
The state of PowerFeedback has changed.
The DinDali2SigEventChange event will trigger for this event id. DinDali2EventArgs will fire with the event Id, the loop index and index into the ballast/group collection. | |
| SuccessFeedbackEventId |
The state of SuccessFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ThreeByteCommandNoResponseFeedbackEventId |
The state of ThreeByteCommandNoResponseFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ThreeByteCommandResponseReceivedEventId |
The state of ThreeByteCommandResponseFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ThreeByteCommandResponseValidFeedbackEventId |
The state of ThreeByteCommandResponseValidFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| TwoByteCommandNoResponseFeedbackEventId |
The state of TwoByteCommandNoResponseFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| TwoByteCommandResponseReceivedEventId |
The state of TwoByteCommandResponseFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| TwoByteCommandResponseValidFeedbackEventId |
The state of TwoByteCommandResponseValidFeedback has changed.
The BaseEvent event will trigger for this event id. |