Click or drag to resize

DaliLoop Properties

The DaliLoop type exposes the following members.

Properties
 NameDescription
Public propertyAllBallastLower Property to lower the light levels of all the ballasts on the DaliLoop, using the ramp rate defined in the DaliBallast.
Public propertyAllBallastRaise Property to raise the light levels of all the ballasts on the DaliLoop, using the ramp rate defined in the DaliBallast.
Public propertyBallastsDALI Ballasts collection.
Public propertyBroadcastLevelIn Property to set the brightness level for all ballasts on the DaliLoop.
Public propertyBusyFeedback Property to indicate that the DALI controller is performing search of ballasts connected to the DaliLoop.

The BaseEvent event will trigger with BusyFeedbackEventId.

Public propertyConfigurationReadFeedback Property to indicate that the DALI controller is reading configuration parameters (i.e., min/max and override levels). These parameters are typically set when using the DALI Commissioning Tool.

The BaseEvent event will trigger with ConfigurationReadFeedbackEventId.

Public propertyDaliBusErrorFeedback Property to indicate that an error has been detected on the DaliLoop.

The BaseEvent event will trigger with DaliBusErrorFeedbackEventId.

Public propertyDeviceLoopIsOn Returns the DinDali2 and DinDali2Cresnet devices the DaliLoop is on.
Public propertyFailFeedback Property to report if the ballast replacement(s) failed.

The BaseEvent event will trigger with FailFeedbackEventId.

Public propertyGroupsDALI Groups collection.
Public propertyInBallastReplacementFeedback Property to indicate that ballast replacement is active.

The BaseEvent event will trigger with InBallastReplacementFeedbackEventId.

Public propertyInExternalOverrideFeedback Property to indicate that external override is active.

The OverrideEventHandler event will trigger with External.

Public propertyInManualOverrideFeedback Property to indicate that manual override is active.

The OverrideEventHandler event will trigger with Manual.

Public propertyNumberDaliLoop number
Public propertyNumberOfMissingBallastsFeedback Property to return the number of missing ballasts after ballast replacement has loaded.

The BaseEvent event will trigger with NumberOfMissingBallastsReceivedEventId.

Public propertyNumberOfNewBallastsFeedback Property to return the number of new DaliBallast after ballast replacement has loaded.

The BaseEvent event will trigger with NumberOfNewBallastsReceivedEventId.

Public propertySuccessFeedback Property to report if the ballast replacement was successful.

The BaseEvent event will trigger with SuccessFeedbackEventId.

Public propertyThreeByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering the 3-byte command using Execute(Byte, Byte, Byte) method.

The BaseEvent event will trigger with ThreeByteCommandNoResponseFeedbackEventId.

Public propertyThreeByteCommandResponseFeedback 8-bit response to the last executed 3-byte command. The high-order byte of the response is ignored.

The BaseEvent event will trigger with ThreeByteCommandResponseReceivedEventId.

Public propertyThreeByteCommandResponseValidFeedback Property to indicate that the 3-byte command Response contains valid data. The data is sent from the other DALI controller in response to an Execute(Byte, Byte, Byte) command.

The BaseEvent event will trigger with ThreeByteCommandResponseValidFeedbackEventId.

Public propertyTwoByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering a 2-byte command using Execute(Byte, Byte).

The BaseEvent event will trigger with TwoByteCommandNoResponseFeedbackEventId.

Public propertyTwoByteCommandResponseFeedback 8-bit response to the last executed 2-byte query command. The high-order byte of the response is ignored.

The BaseEvent event will trigger with TwoByteCommandResponseReceivedEventId.

Public propertyTwoByteCommandResponseValidFeedback Property to indicate that the 2-byte command Response contains valid data.

The BaseEvent event will trigger with TwoByteCommandResponseValidFeedbackEventId.

Top
See Also