Click or drag to resize

DinDliCresnet Class

Cresnet based DLI, allowing control of up to 128 individual Drivers (two 64-driver networks).

This class will trigger BaseEvent, GroupSigEventChange and OverrideEventHandler events.

Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.Lighting
Assembly: Crestron.SimplSharpPro.Lighting (in Crestron.SimplSharpPro.Lighting.dll) Version: 2.21.121
Syntax
C#
public sealed class DinDliCresnet : DinDli

The DinDliCresnet type exposes the following members.

Constructors
 NameDescription
Public methodDinDliCresnet(UInt32, CrestronControlSystem) Constructor to generate a new DinDliCresnet.
Public methodDinDliCresnet(UInt32, IDeviceBranch) Constructor to generate a new DinDliCresnet.
Top
Properties
 NameDescription
Public propertyAllDriverLower Property to lower the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverRaise Property to raise the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverTcLower Property to lower the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverTcRaise Property to raise the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyBroadcastLevel Property to set the brightness level for all drivers on the DinDliBase.
(Inherited from DinDliBase)
Public propertyBroadcastTcLevel Property to set the Tc level for all drivers on the DinDliBase.
(Inherited from DinDliBase)
Public propertyCctSceneApproximationNeedsUpdateFeedback Property to indicate that the CCT scene approximation needs updated.

The BaseEvent event will trigger with CctSceneApproximationNeedsUpdateEventId.


(Inherited from DinDliBase)
Public propertyCctSceneApproximationProgrammingInProgressFeedback Property to indicate that the CCT scene approximation programming is in progress.

The BaseEvent event will trigger with CctSceneApproximationProgrammingInProgressEventId.


(Inherited from DinDliBase)
Public propertyConfigurationReadFeedback Property to indicate that the DALI controller is reading configuration parameters (i.e., minimum/maximum and override levels). These parameters are typically set when using the DALI Commissioning Tool.

The DriverSigEventChange event will trigger with ConfigurationReadFeedbackEventId.


(Inherited from DinDliBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCurrentCctOperatingModeFeedback Property to report the current CCT operating mode.

The BaseEvent event will trigger with CurrentCctOperatingModeFeedbackEventId.


(Inherited from DinDliBase)
Public propertyDaliBusErrorFeedback Property to indicate that an error has been detected on the DinDliBase.

The DriverSigEventChange event will trigger with DaliBusErrorFeedbackEventId.


(Inherited from DinDliBase)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDeviceName Property to set the Device Name of this DinDliBase
(Inherited from DinDliBase)
Public propertyDeviceNameFeedback Property to read the Device Name value of this DinDliBase

The BaseEvent event will trigger with DeviceNameFeedbackEventId.


(Inherited from DinDliBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyDriverReplacement Object of Driver Replacement on DIN-DLI.
(Inherited from DinDliBase)
Public propertyDriversDLI Drivers collection.
(Inherited from DinDli)
Public propertyDriverSceneConfigurationOperations Object of Driver Scene Configuration Operations on DIN-DLI.
(Inherited from DinDliBase)
Public propertyDriverSceneRecallSave Object of Driver Scene Recall Save on DIN-DLI.
(Inherited from DinDliBase)
Public propertyGroupsDLI Groups collection.
(Inherited from DinDli)
Public propertyGroupSceneConfigurationOperations Object of Group Scene Configuration Operations on DIN-DLI.
(Inherited from DinDliBase)
Public propertyGroupSceneRecallSave Object of Group Scene Recall Save on DIN-DLI.
(Inherited from DinDliBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyInExternalOverrideFeedback Property to indicate that external override is active.

The OverrideEventHandler event will trigger with External.


(Inherited from DinDliBase)
Public propertyInManualOverrideFeedback Property to indicate that manual override is active.

The OverrideEventHandler event will trigger with Manual.


(Inherited from DinDliBase)
Public propertyIsDynamicFadeTimeEnabledFeedback Property to indicate the enabled state of Dynamic Fade Times.

The BaseEvent event will trigger with IsDynamicFadeTimeEnabledEventId.


(Inherited from DinDliBase)
Public propertyIsExtendedFadeTimeEnabledFeedback Property to indicate the enabled state of Extended Fade Times.

The BaseEvent event will trigger with IsExtendedFadeTimeEnabledEventId.


(Inherited from DinDliBase)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySetCctOperatingMode Property to set the CCT operating mode.
(Inherited from DinDliBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyThreeByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering the 3-byte command using Execute(Byte, Byte, Byte) method.

The DriverSigEventChange event will trigger with ThreeByteCommandNoResponseFeedbackEventId.


(Inherited from DinDliBase)
Public propertyThreeByteCommandResponseFeedback 8-bit response to the last executed 3-byte command. The high-order byte of the response is ignored.

The DriverSigEventChange event will trigger with ThreeByteCommandResponseReceivedEventId.


(Inherited from DinDliBase)
Public propertyThreeByteCommandResponseValidFeedback Property to indicate that the 3-byte command Response contains valid data. The data is sent from the other DALI controller in response to an Execute(Byte, Byte, Byte) command.

The DriverSigEventChange event will trigger with ThreeByteCommandResponseValidFeedbackEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering a 2-byte command using Execute(Byte, Byte).

The DriverSigEventChange event will trigger with TwoByteCommandNoResponseFeedbackEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandResponseFeedback 8-bit response to the last executed 2-byte query command. The high-order byte of the response is ignored.

The DriverSigEventChange event will trigger with TwoByteCommandResponseReceivedEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandResponseValidFeedback Property to indicate that the 2-byte command Response contains valid data.

The DriverSigEventChange event will trigger with TwoByteCommandResponseValidFeedbackEventId.


(Inherited from DinDliBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
Methods
 NameDescription
Public methodApplyCctOperatingMode Method to start using the CCT operating mode.
(Inherited from DinDliBase)
Public methodBroadcastOff Method to turn off all the drivers on the DinDliBase.
(Inherited from DinDliBase)
Public methodDisableDynamicFadeTimes Method to disable the use of Dynamic Fade Times.
(Inherited from DinDliBase)
Public methodDisableExtendedFadeTimes Method to disable the use of Extended Fade Times.
(Inherited from DinDliBase)
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from GenericDevice)
Public methodEnableDynamicFadeTimes Method to enable the use of Dynamic Fade Times.
(Inherited from DinDliBase)
Public methodEnableExtendedFadeTimes Method to enable the use of Extended Fade Times.
(Inherited from DinDliBase)
Public methodEnterManualOverride Method to enter manual override mode. This recalls the override load levels stored in the DliDriver.
(Inherited from DinDliBase)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodExecute(Byte, Byte) Method to send the 2-byte DALI control/query command or special command specified by "paramAddress" (byte 1) and "paramCommandOrData" (byte 2). The commands can be sent to individual DliDriver/DliGroup/ all drivers that are part of the DinDliBase.
(Inherited from DinDliBase)
Public methodExecute(Byte, Byte, Byte) Method to send the 3-byte DALI command. The DALI command consists of "paramAddress" (byte 1), "paramCommandOrData" (byte 2) and "paramData" (byte 3).
(Inherited from DinDliBase)
Public methodExitManualOverride Method to exit manual override mode. This will restore the loads to the non-override states (assuming not also in External override mode).
(Inherited from DinDliBase)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetDriverExtendedType Method to force the ExtendedTypeFeedback properties to refresh.
(Inherited from DinDliBase)
Public methodGetDriverGTIN Method to force updating all the GTINFeedback properties of this DliDriver
(Inherited from DinDliBase)
Public methodGetDriverTcRangeCoolest Method to force updating all the TcRangeCoolestFeedback properties of this DliDriver
(Inherited from DinDliBase)
Public methodGetDriverTcRangeWarmest Method to force updating all the TcRangeWarmestFeedback properties of this DliDriver
(Inherited from DinDliBase)
Public methodGetDriverType Method to force the TypeFeedback properties to refresh.
(Inherited from DinDliBase)
Public methodGetGroupCapabilty Method to force updating all the CapabilityFeedback properties of this DliGroup
(Inherited from DinDliBase)
Public methodGetGroupTcRangeCoolest Method to force updating all the TcRangeCoolestFeedback properties of this DliGroup
(Inherited from DinDliBase)
Public methodGetGroupTcRangeWarmest Method to force updating all the TcRangeWarmestFeedback properties of this DliGroup
(Inherited from DinDliBase)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodProgramCctSceneApproximationValues Method to program the CCT scene approximation values.
(Inherited from DinDliBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventDriverSigEventChange Event triggered when the DliDriver reports information to the Control System. Will fire the DriverSigEventChange with GenericEventArgs.

Valid event IDs are available in DinDliBase


(Inherited from DinDliBase)
Public eventGroupSigEventChange Event triggered when the DliGroup reports information to the Control System. Will fire the GroupSigEventChange with GenericEventArgs.

Valid event IDs are available in DinDliBase


(Inherited from DinDliBase)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Public eventOverrideEventHandler Event triggered when the DinDliBase reports Override sig information to the Control System.

Valid event IDs are available in eOverrideEvents.


(Inherited from DinDliBase)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also