Click or drag to resize

DinDliCresnet Properties

The DinDliCresnet type exposes the following members.

Properties
 NameDescription
Public propertyAllDriverLower Property to lower the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverRaise Property to raise the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverTcLower Property to lower the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyAllDriverTcRaise Property to raise the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver.
(Inherited from DinDliBase)
Public propertyBroadcastLevel Property to set the brightness level for all drivers on the DinDliBase.
(Inherited from DinDliBase)
Public propertyBroadcastTcLevel Property to set the Tc level for all drivers on the DinDliBase.
(Inherited from DinDliBase)
Public propertyCctSceneApproximationNeedsUpdateFeedback Property to indicate that the CCT scene approximation needs updated.

The BaseEvent event will trigger with CctSceneApproximationNeedsUpdateEventId.


(Inherited from DinDliBase)
Public propertyCctSceneApproximationProgrammingInProgressFeedback Property to indicate that the CCT scene approximation programming is in progress.

The BaseEvent event will trigger with CctSceneApproximationProgrammingInProgressEventId.


(Inherited from DinDliBase)
Public propertyConfigurationReadFeedback Property to indicate that the DALI controller is reading configuration parameters (i.e., minimum/maximum and override levels). These parameters are typically set when using the DALI Commissioning Tool.

The DriverSigEventChange event will trigger with ConfigurationReadFeedbackEventId.


(Inherited from DinDliBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCurrentCctOperatingModeFeedback Property to report the current CCT operating mode.

The BaseEvent event will trigger with CurrentCctOperatingModeFeedbackEventId.


(Inherited from DinDliBase)
Public propertyDaliBusErrorFeedback Property to indicate that an error has been detected on the DinDliBase.

The DriverSigEventChange event will trigger with DaliBusErrorFeedbackEventId.


(Inherited from DinDliBase)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDeviceName Property to set the Device Name of this DinDliBase
(Inherited from DinDliBase)
Public propertyDeviceNameFeedback Property to read the Device Name value of this DinDliBase

The BaseEvent event will trigger with DeviceNameFeedbackEventId.


(Inherited from DinDliBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyDriverReplacement Object of Driver Replacement on DIN-DLI.
(Inherited from DinDliBase)
Public propertyDriversDLI Drivers collection.
(Inherited from DinDli)
Public propertyDriverSceneConfigurationOperations Object of Driver Scene Configuration Operations on DIN-DLI.
(Inherited from DinDliBase)
Public propertyDriverSceneRecallSave Object of Driver Scene Recall Save on DIN-DLI.
(Inherited from DinDliBase)
Public propertyGroupsDLI Groups collection.
(Inherited from DinDli)
Public propertyGroupSceneConfigurationOperations Object of Group Scene Configuration Operations on DIN-DLI.
(Inherited from DinDliBase)
Public propertyGroupSceneRecallSave Object of Group Scene Recall Save on DIN-DLI.
(Inherited from DinDliBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyInExternalOverrideFeedback Property to indicate that external override is active.

The OverrideEventHandler event will trigger with External.


(Inherited from DinDliBase)
Public propertyInManualOverrideFeedback Property to indicate that manual override is active.

The OverrideEventHandler event will trigger with Manual.


(Inherited from DinDliBase)
Public propertyIsDynamicFadeTimeEnabledFeedback Property to indicate the enabled state of Dynamic Fade Times.

The BaseEvent event will trigger with IsDynamicFadeTimeEnabledEventId.


(Inherited from DinDliBase)
Public propertyIsExtendedFadeTimeEnabledFeedback Property to indicate the enabled state of Extended Fade Times.

The BaseEvent event will trigger with IsExtendedFadeTimeEnabledEventId.


(Inherited from DinDliBase)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySetCctOperatingMode Property to set the CCT operating mode.
(Inherited from DinDliBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyThreeByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering the 3-byte command using Execute(Byte, Byte, Byte) method.

The DriverSigEventChange event will trigger with ThreeByteCommandNoResponseFeedbackEventId.


(Inherited from DinDliBase)
Public propertyThreeByteCommandResponseFeedback 8-bit response to the last executed 3-byte command. The high-order byte of the response is ignored.

The DriverSigEventChange event will trigger with ThreeByteCommandResponseReceivedEventId.


(Inherited from DinDliBase)
Public propertyThreeByteCommandResponseValidFeedback Property to indicate that the 3-byte command Response contains valid data. The data is sent from the other DALI controller in response to an Execute(Byte, Byte, Byte) command.

The DriverSigEventChange event will trigger with ThreeByteCommandResponseValidFeedbackEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandNoResponseFeedback Property to indicate that no response has been received after triggering a 2-byte command using Execute(Byte, Byte).

The DriverSigEventChange event will trigger with TwoByteCommandNoResponseFeedbackEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandResponseFeedback 8-bit response to the last executed 2-byte query command. The high-order byte of the response is ignored.

The DriverSigEventChange event will trigger with TwoByteCommandResponseReceivedEventId.


(Inherited from DinDliBase)
Public propertyTwoByteCommandResponseValidFeedback Property to indicate that the 2-byte command Response contains valid data.

The DriverSigEventChange event will trigger with TwoByteCommandResponseValidFeedbackEventId.


(Inherited from DinDliBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also