Click or drag to resize

ClsC6xBaseClsC6OccupancySensing Class

Occupancy Sensing class for ClsC6xBase.

This class will trigger BaseEvent event with event IDs defined in ClsC6xBase.

Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.LightingClsC6xBaseClsC6OccupancySensing

Namespace: Crestron.SimplSharpPro.Lighting
Assembly: Crestron.SimplSharpPro.Lighting (in Crestron.SimplSharpPro.Lighting.dll) Version: 2.21.121
Syntax
C#
public sealed class ClsC6OccupancySensing : IParentInformation, 
	ICommonOccupancySensorInfo

The ClsC6xBaseClsC6OccupancySensing type exposes the following members.

Properties
 NameDescription
Public propertyCurrentTimeoutFeedback Property to indicate which timeout is being used by the sensor. This property is not supported by ClsC6xBase.
Public propertyDecrementTimeoutHours Property to decrement the timeout in hours. The hours increment within a range of 0 to 17 hours. This property is not used with CLS-C6 firmware version 2.0 and later since the maximum motion timeout is 30 minutes.
Public propertyDecrementTimeoutMinutes Property to decrement the timeout period by one minute. If the property value is true for longer than 0.5 seconds, the timeout will auto-adjust until the property value changes to false or until 0 minutes is reached.
Public propertyEnableActivityReporting Property to enable activity reporting via the MotionActivityFeedback and FunctionActivityFeedback properties. If the system is combining rooms (via a Combining object) and making use of occupancy sensing, then EnableActivityReporting must be set to true for all units which may be combined. true = Enable activity reporting; false = Disable activity reporting
Public propertyEntrySceneEnabledFeedback Property to indicate that the entry scene is enabled.

This property will trigger BaseEvent event with EntrySceneEnabledEventId.

Public propertyExitSceneEnabledFeedback Property to indicate that the exit scene is enabled.

This property will trigger BaseEvent event with ExitSceneEnabledEventId.

Public propertyFunctionActivityFeedback Property to indicate that the CLS-C6 occupancy timer has been reset due to a button being pressed on the CLS-C6 or attached keypad, or a command being received on the network.

This property will trigger BaseEvent event with FunctionActivityDetectedEventId.

Public propertyIncrementTimeoutHours Property to increment the timeout in hours. The hours increment within a range of 0 to 17 hours. This property is not used with CLS-C6 firmware version 2.0 and later since the maximum motion timeout is 30 minutes. The hours increment within a range of 0 to 17 hours. If this property value is true for longer than 0.5 seconds, the hours will auto-adjust until the property value changes to false or until 17 hours is reached.
Public propertyIncrementTimeoutMinutes Property to increment the timeout period by one minute. If the property value is true for longer than 0.5 seconds, the timeout will auto-adjust until the property value changes to false or until the maximum minutes is reached.
Public propertyMotionActivityFeedback Property to indicate that the CLS-C6 occupancy timer has been reset due to motion being detected in the room.

This property will trigger BaseEvent event with MotionActivityDetectedEventId.

Public propertyOccupancyDetectedFeedback Property to indicate that the room is occupied.

This property will trigger BaseEvent event with OccupancyDetectedEventId.

Public propertyParent Parent for ClsC6xBaseClsC6OccupancySensing class.
Public propertyRemoteTimeout Property to set timeout remotely. This property is not supported by ClsC6xBase.
Public propertyTimeoutHoursFeedback This property is not used with CLS-C6 firmware version 2.0 and later. For firmware versions earlier than 2.0, this property reports the hours portion of the timeout period.

This property will trigger BaseEvent event with TimeoutHoursFeedbackEventId.

Public propertyTimeoutMinutesFeedback Property to report the minutes portion of the timeout period.

This property will trigger BaseEvent event with TimeoutMinutesFeedbackEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Top
Methods
 NameDescription
Public methodDisableEntryScene Method to disable the entry scene. When disabled, the entry scene will not be executed, regardless of the occupancy status of the room.
Public methodDisableExitScene Method to disable the exit scene. When disabled, the exit scene will not be executed, regardless of the occupancy status of the room.
Public methodEnableEntryScene Method to enable the entry scene. When enabled, the entry scene is executed when the OccupancyDetectedFeedback value changes to true as the result of motion activity (but not function activity).
Public methodEnableExitScene Method to enable the exit scene. When enabled, the exit scene is executed when the OccupancyDetectedFeedback property value changes to false.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also