Click or drag to resize

eHdcpTransmitterMode Enumeration

Enum to define HDCP Mode set for output.

Namespace: Crestron.SimplSharpPro.DM
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public enum eHdcpTransmitterMode
Members
Member nameValueDescription
Auto0 Auto Mode.

Scaler outputs:

When non-HDCP content is routed, the content will pass through and not be authenticated until HDCP content is routed.

When HDCP content is routed the scaler should latch onto the highest HDCP level supported by the downstream device.

The device should not attempt to re-authenticate unless hot-plugged or downstream device HDCP support level changes.

This is the default mode for Scaler outputs.

Eg. 4K-HDO connected to DMC-4K-HD (Support Level 2.x)

Input (Non-HDCP) | Sink (Non-HDCP)

Input HDCP | Sink (HDCP 2.2)

Input HDCP 2.2 | Sink (HDCP 2.2)

Input Non-HDCP | Sink (HDCP 2.2)

Input HDCP | Sink (HDCP 2.2)

Output Hot-plugged or downstream HDCP support level change:

Input non-HDCP | Sink (Non-HDCP)

For Non-Scaler outputs this mode is invalid.

FollowInput1 Follow Input Mode.

Authenticate each time the input sync changes it state. The output should authenticate to the level reported at the Input.

This is the default mode for Non-Scaler outputs.

ForceHighest2 Force to authenticate to the highest level HDCP.

For Scaler outputs in this mode, authenticate each time the input sync changes it state.

The output should authenticate to the level reported at the Input.

For Non-Scaler outputs in this mode, authenticate to the highest level HDCP supported by the downstream device.

This should be done regardless of the input side.

NeverAuthenticate3 Never Authenticate (Blank if the Input is HDCP encrypted).
NotSupported65,535 HDCP Mode is not supported.

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also