Hd |
This class will trigger AuxiliaryOutputChange event.
public class HdMdNxM4kzEAuxiliaryOutput : AudioOutputAdvanced
The HdMdNxM4kzEAuxiliaryOutput type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioAuxiliaryFeedback |
Property to report the audio source selected to route to the Auxiliary output.
The property value has no impact when AudioFollowsOutputOn method is called.
This property will trigger DMSystemChange event with AudioAuxiliaryFeedbackEventId. | |
| AudioChannelsFeedback |
Reports the number of audio channels detected.
Values will range from 0 to 8. A value of 0 signifies that no audio is present or
that the channel count could not be determined because the audio format is compressed.
The BaseEvent event will trigger with AudioChannelsEventId. The DMInputChange event will trigger with AudioChannelsEventId. (Inherited from AudioOutput) | |
| AudioFollowsOutputOffFeedback |
Property to indicate that the corresponding Auxiliary audio source to follow the selected video output is disabled.
This property will trigger DMSystemChange event with AuxiliaryAudioFollowsOutputOffEventId. | |
| AudioFollowsOutputOnFeedback |
Property to indicate that the corresponding Auxiliary audio source to follow the selected video output is enabled.
The specific output can be configured by calling AudioFollowsOutputSelect(HdMdNxM4kzEeHdMdNxM4kzEAudioVideoSource) method.
This property will trigger DMSystemChange event with AuxiliaryAudioFollowsOutputOnEventId. | |
| AudioFollowsOutputSelectFeedback |
Property to report the audio source that follows the corresponding Auxiliary Output.
Default is set to Hdmi1 or Hdmi2 corresponding to the Auxiliary output.
The property has no impact if AudioFollowsOutputOff method is called.
This property will trigger DMSystemChange event with AuxiliaryAudioFollowsOutputSelectFeedbackEventId. | |
| AudioFormatFeedback |
Reports the detected audio format accompanying the stream.
The BaseEvent event will trigger with AudioFormatEventId. The DMInputChange event will trigger with AudioFormatEventId. (Inherited from AudioOutput) | |
| AudioMuteFeedback |
Indicates that the input/output audio is muted.
To access the AnalogAudioDisableFeedback sig on DMB-4K-O-HD Blade card, this property is used.
The DMOutputChange event will trigger with AudioMuteEventId. The "HdMdMxN4kzEAuxiliaryOutput.AuxiliaryOutputChange" event will trigger with AudioMuteEventId. (Inherited from AudioOutputAdvanced) | |
| AudioSamplingFrequencyFeedback |
Reports the sampling frequency of the audio accompanying the video (1 = 0.1 kHz).
Valid values range from 0 to 1920 (192kHz).
Only available on the DM.Cards.Dmc4kC and DM.Cards.Dmc4kzC. The BaseEvent event will trigger with SamplingFreqEventId. The DMInputChange event will trigger with SamplingFreqEventId. (Inherited from AudioOutput) | |
| AudioUnmuteFeedback |
Indicates that the input/output audio is not muted.
To access the AnalogAudioEnableFeedback sig on DMB-4K-O-HD Blade card, this property is used.
The DMOutputChange event will trigger with AudioUnmuteEventId. The "HdMdMxN4kzEAuxiliaryOutput.AuxiliaryOutputChange" event will trigger with AudioUnmuteEventId. (Inherited from AudioOutputAdvanced) | |
| Delay |
Sets the delay value.
(Inherited from AudioOutputAdvanced) | |
| DelayFeedback |
Returns the delay value.
The DMOutputChange event will trigger with DelayEventId The BaseEvent event will trigger with DelayEventId. The DMInputChange event will trigger with DelayEventId. (Inherited from AudioOutputAdvanced) | |
| MonoFeedback |
Indicates that the mono audio is output on Auxiliary output.
The AuxiliaryOutputChange event will trigger with MonoOutputFeedBackEventId | |
| Number |
Property indicates the output number on the device.
(Inherited from AudioOutput) | |
| Owner |
Access the owner of this audio control class.
(Inherited from AudioOutput) | |
| StereoFeedback |
Indicates that the stereo audio is output on Auxiliary output.
The AuxiliaryOutputChange event will trigger with StereoOutputFeedBackEventId | |
| Volume |
Sets the volume level of the audio output.
To access the AnalogAudioLevel sigs of DMB-4K-O-HD Blade card, this property is used.
(Inherited from AudioOutput) | |
| VolumeFeedback |
Reports the volume level at the analog output.
For HD-MD-NxM-4KZE switches this property value range is: -80dB to +20 dB with 1dB increment for 10. Default is 0dB.
200 = +20dB
-800 = -80dB
The DMInputChange event will trigger with DacVolumeEventId for the following DM devices: Dmc4kC/Dmc4kCDsp/Dmc4kHd/Dmc4kHdDsp/DmcC/DmcCat/DmcCatDsp/DmcF/DmcFDsp/DmcHd/DmcHdDsp/DmcHdo/DmcS/DmcSBase/DmcSdi/DmcSDsp. The DMOutputChange event will trigger with VolumeEventId for DMOutput streams. The BaseEvent event will trigger with DacVolumeEventId for the CcsUcCodec200 and stand alone DMCI versions of the following DM Cards: Dmc4kC/Dmc4kCDsp/Dmc4kHd/Dmc4kHdDsp/DmcC/DmcCat/DmcCatDsp/DmcF/DmcFDsp/DmcHd/DmcHdDsp/DmcHdo/DmcS/DmcSBase/DmcSdi/DmcSDsp. The "HdMdMxN4kzEAuxiliaryOutput.AuxiliaryOutputChange" event will trigger with VolumeEventId. (Inherited from AudioOutput) |
| Name | Description | |
|---|---|---|
| AudioFollowsOutputOff | Property to disable the corresponding Auxiliary audio source to follow the selected video output. | |
| AudioFollowsOutputOn | Property to enable the corresponding Auxiliary audio source to follow the selected video output. The specific output can be configured via AudioFollowsOutputSelect(HdMdNxM4kzEeHdMdNxM4kzEAudioVideoSource) method. This property is set to enabled by default with AudioFollowsOutputSelect(HdMdNxM4kzEeHdMdNxM4kzEAudioVideoSource). | |
| AudioFollowsOutputSelect | Method to set the audio follows output for the specified Auxiliary Output. Default is set to Hdmi1 or Hdmi2 corresponding to the selected Auxiliary output. For 4x4 and 8x4 valid values are Hdmi1 to Hdmi4 only. For 8x8, valid values are Hdmi1 to Hdmi8. Invalid values shall be ignored. This property has no impact if AudioFollowsOutputOff method is called. | |
| AudioMute |
Mutes the input/output audio.
This method is used to disable the AnalogAudio on DMB-4K-O-HD Blade card.
(Inherited from AudioOutputAdvanced) | |
| AudioUnmute |
Unmutes the input/output audio.
This method is used to enable the AnalogAudio on DMB-4K-O-HD Blade card.
(Inherited from AudioOutputAdvanced) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| Mono | Method to provide mono audio to Auxiliary output. | |
| RouteAudioToAuxiliary | Method to select the audio source to route to the specified Auxiliary output. Hdmi5 to Hdmi8 are only valid for 8x4 switcher. 4x4 switcher shall ignore the values Hdmi5 to Hdmi8. Invalid values shall be ignored. This property has no impact if AudioFollowsOutputOn method is called or when AudioFollowsOutputOnFeedback value is "true". | |
| Stereo | Method to provide stereo audio to Auxiliary output. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| AuxiliaryOutputChange | Event triggered when a feedback has changed for this HdMdNxM4kzEAuxiliaryOutput. |