Hd |
This class will trigger DMInputChange, DMOutputChange, DMSystemChange, AuxiliaryOutputChange, NetworkChange, AttributeChange, CecChange and DeviceInformationChange events.
public class HdMdNxM4kzE : Switch
The HdMdNxM4kzE type exposes the following members.
| Name | Description | |
|---|---|---|
| AutoRouteOffFeedback |
Property to indicate that the auto route is disabled
true: auto route disabled; false: auto route enabled
The DMSystemChange event will trigger with AutoRouteOffEventId. | |
| AutoRouteOnFeedback |
Property to indicate that the auto route is enabled
true: auto route enabled; false: auto route disabled
The DMSystemChange event will trigger with AutoRouteOnEventId. | |
| AuxiliaryOutputs |
Auxiliary outputs collection on this device
The AuxiliaryOutputChange and DMOutputEventIds events. | |
| ConfigurationErrorFeedback |
Property to report the recently detected configuration error.
This property will trigger DMSystemChange event with ConfigurationErrorFeedbackEventId. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| DownloadConfigurationFeedback |
Property to indicate that the downloading of the configuration file is going on to the USB stick if plugged in.
This property value remains "true" until Download of the configuration is completed.
Check ConfigurationErrorFeedback for any error related to the download config operation.
This property will trigger DMSystemChange event with DownloadConfigurationEventId. | |
| EnableUSBBreakaway |
Enables USB breakaway for as long as the input is 'true'. This allows USB to be routed independently from video.
If USB breakaway is not enabled, the USB routes will follow the selected video routes, and the "USBOut#" inputs will have no effect.
'true' (level-sensitive) = Enable USB breakaway; 'false' = Disable USB breakaway
This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch) | |
| EnableUSBBreakawayFeedback |
Indicates that USB breakaway is enabled.
The output remains high for as long as USB breakaway is enabled.
'true' = USB breakaway enabled; 'false' = USB breakaway disabled
This property is not supported by HD-RX-4K-X01 switches
The DMSystemChange event will trigger with the USBBreakawayEventId if the switcher is a device. (Inherited from Switch) | |
| FirmwareVersionFeedback |
Reports the current FW version of the unit.
The DMSystemChange event will trigger with FirmwareVersionFeedbackEventId. | |
| FrontPanelLedDisabledFeedback |
Property to indicate that the front LED lock is disabled.
This property will trigger DMSystemChange event with FrontPanelLedDisabledEventId. | |
| FrontPanelLedEnabledFeedback |
Property to indicate that the front LED lock is enabled
This property will trigger DMSystemChange event with FrontPanelLedEnabledEventId. | |
| FrontPanelLockDisabledFeedback |
Property to indicate that the front panel lock is disabled.
This property will trigger DMSystemChange event with FrontPanelLockDisabledEventId. | |
| FrontPanelLockEnabledFeedback |
Property to indicate that the front panel lock is enabled
This property will trigger DMSystemChange event with FrontPanelLockEnabledEventId. | |
| HdmiInputs |
HDMI inputs collection on this device
The DMInputChange and DMInputEventIds events. The AttributeChange event will trigger with VideoAttributeEventIds The CecChange event will trigger with CecEventIds | |
| HdmiOutputs |
HDMI Outputs collection on this device
The DMOutputChange event will trigger with DMOutputEventIds The AttributeChange event will trigger with VideoAttributeEventIds The DeviceInformationChange event will trigger with ConnectedDeviceEventIds The CecChange event will trigger with CecEventIds | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| Inputs |
Get Collection of inputs for this switch
(Inherited from Switch) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| ModelNameFeedback |
Property to report the model name of the unit. i.e. HD-RX-210-4K-C-E or HD-RX-210-4K-C-PD-E
The DMSystemChange event will trigger with ModelNameFeedbackEventId. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Network |
Netowrk object on this device
The NetworkChange and DMInputEventIds events. | |
| NumberOfInputs |
Number of Input Channels on this switch
(Inherited from Switch) | |
| NumberOfOutputs |
Number of Output Channels on this switch
(Inherited from Switch) | |
| Outputs |
Get Collection of outputs for this switch
(Inherited from Switch) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SerialNumberFeedback |
Property to report the serial number of the unit.
The DMSystemChange event will trigger with SerialNumberFeedbackEventId. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SwitchType |
The type of DM switcher
(Inherited from Switch) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UploadConfigurationFeedback |
Property to indicate that the uploading of the configuration file is going on from the USB stick if plugged in.
This property value remains "true" until upload of the configuration is completed.
Check ConfigurationErrorFeedback for any error related to the upload config operation.
This property will trigger DMSystemChange event with UploadConfigurationEventId. | |
| USBEnter |
Enables the "Output#_USBRoutedTo" or "Input#_USBRoutedTo" source selection analogs for as long as the input is 'true'.
When the input is 'false', the analogs have no effect.
'true' (level-sensitive) = Enable USB; 'false' = Disable USB
This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch) | |
| UsbPortDisabledFeedback |
Property to indicate that the USB port is disabled.
true: USB Port is disabled; false: USB Port is enabled
This property will trigger DMSystemChange event with UsbPortDisabledEventId. | |
| UsbPortEnabledFeedback |
Property to indicate that the indicate that the USB port is enabled.
true: USB Port is enabled; false: USB Port is disabled
This property will trigger DMSystemChange event with UsbPortEnabledEventId. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| VideoEnter |
Enables the "VideoOut#" video source selection analogs for as long as the input is 'true'.
When the input is 'false', the analogs have no effect.
'true' (level-sensitive) = Enable video; 'false' = Disable video
This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| AutoRouteOff | Disables auto route | |
| AutoRouteOn | Enables auto route | |
| DisableFrontPanelLed | Method to disable front panel LEDs | |
| DisableFrontPanelLock | Method to disable the front panel lock | |
| DisableUsbPort | Method to disable the USB port. | |
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| DownloadConfiguration | Method to download the configuration file to the USB stick if plugged in. Check ConfigurationErrorFeedback for any error related to the download config operation. | |
| EnableFrontPanelLed | Method to enable front panel LEDs | |
| EnableFrontPanelLock | Method to enable the front panel lock | |
| EnableUsbPort | Method to enable the USB port. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) | |
| UploadConfiguration | Method to upload the configuration file from the USB stick if plugged in. Check ConfigurationErrorFeedback for any error related to the upload config operation. |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| DMInputChange |
Handle DM Input Events
EventIds for this event are located in the DMInputEventIds class.
(Inherited from Switch) | |
| DMOutputChange |
Handle DM Output Events
EventIds for this event are located in the DMOutputEventIds class.
(Inherited from Switch) | |
| DMSystemChange |
Event to handle general switch events
EventIds for this event are located in the DMSystemEventIds class.
(Inherited from Switch) | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) |