Dmps |
public class Dmps3SystemControlWithStreaming : Dmps3SystemControl
The Dmps3SystemControlWithStreaming type exposes the following members.
| Name | Description | |
|---|---|---|
| ApplySystemId |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| AudioEnter |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| ContentLan1LinkStatusFeedback |
Indicates if an Ethernet link is detected at the content LAN1 port.
'true' = Ethernet link detected; 'false' = Ethernet link not detected.
The DMSystemChange event will trigger with the ContentLAN1LinkStatusEventId. | |
| ContentLan1Mode | Sets the Content LAN1 Mode. (Sets which interface to use for streaming) | |
| ContentLan1ModeFeedback |
Reports the Content LAN1 Mode.
The DMSystemChange event will trigger with the ContentLAN1ModeEventId. | |
| ContentLan2LinkStatusFeedback |
Indicates if an Ethernet link is detected at the content LAN2 port.
'true' = Ethernet link detected; 'false' = Ethernet link not detected.
The DMSystemChange event will trigger with the ContentLAN2LinkStatusEventId. | |
| ContentLan2Mode | Sets the Content LAN2 Mode. (Sets which interface to use for streaming) | |
| ContentLan2ModeFeedback |
Reports the Content LAN2 Mode.
The DMSystemChange event will trigger with the ContentLAN2ModeEventId. | |
| DeviceModeFeedback |
Property to return the current streaming device mode.
The DMSystemChange event will trigger with the DeviceModeFeedbackEventId. | |
| EnableAudioBreakaway |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| EnableAudioBreakawayFeedback |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| EnableUSBBreakaway |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| EnableUSBBreakawayFeedback |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| EncodingFramerate | Property to set the streaming encoding framerate. | |
| EncodingFramerateFeedback |
Property to return the streaming current encoding framerate.
The DMSystemChange event will trigger with the EncodingFramerateFeedbackEventId. | |
| EncodingResolution | Property to set the streaming encoding resolution. | |
| EncodingResolutionFeedback |
Property to return the current streaming encoding resolution.
The DMSystemChange event will trigger with the EncodingResolutionFeedbackEventId. | |
| FrontPanelBrightnessHigh | Obsolete. Sets the front panel brightness to high. (Inherited from Dmps3SystemControl) | |
| FrontPanelBrightnessHighFeedBack |
Indicates if the front panel brightness level is currently set to high.
The DMSystemChange event will trigger with the FrontPanelBrightnessHighEventId. (Inherited from Dmps3SystemControl) | |
| FrontPanelBrightnessLow | Obsolete. Sets the front panel brightness to low. (Inherited from Dmps3SystemControl) | |
| FrontPanelBrightnessLowFeedBack |
Indicates if the front panel brightness level is currently set to low.
The DMSystemChange event will trigger with the FrontPanelBrightnessLowEventId. (Inherited from Dmps3SystemControl) | |
| FrontPanelBrightnessMedium | Obsolete. Sets the front panel brightness to Medium. (Inherited from Dmps3SystemControl) | |
| FrontPanelBrightnessMediumFeedBack |
Indicates if the front panel brightness level is currently set to medium.
The DMSystemChange event will trigger with the FrontPanelBrightnessMediumEventId. (Inherited from Dmps3SystemControl) | |
| FrontPanelLockOffFeedback |
Indicates if the front panel is unlocked and hence available for AV control.
The DMSystemChange event will trigger with the FrontPanelLockOnEventId. (Inherited from Dmps3SystemControl) | |
| FrontPanelLockOnFeedback |
Indicates if the front panel is locked and hence unavailable for AV control.
The DMSystemChange event will trigger with the FrontPanelLockOnEventId. (Inherited from Dmps3SystemControl) | |
| FrontPanelLockTextEnable |
Enabling this will allow for custom text when Front Panel control is attempted when the Front Panel is Locked.
(Inherited from Dmps3SystemControl) | |
| FrontPanelLockTextLine1 |
Line 1 of Custom Front Panel Locked message text.
(Inherited from Dmps3SystemControl) | |
| FrontPanelLockTextLine2 |
Line 2 of Custom Front Panel Locked message text.
(Inherited from Dmps3SystemControl) | |
| FrontPanelPassword |
Sets the front panel password, which allows the user to enter the Installer Tools menu from the front panel.
Valid values range from 0d (no password required) to 9999d.
(Inherited from Dmps3SystemControl) | |
| FrontPanelPasswordFeedBack |
Indicates the current front panel password.
The DMSystemChange event will trigger with the FrontPanelPasswordEventId. (Inherited from Dmps3SystemControl) | |
| PnmModeFeedBack |
Indicates if Private Network Mode (PNM) is enabled.
The DMSystemChange event will trigger with the PnmModeEventId. (Inherited from Dmps3SystemControl) | |
| SaveSettings |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| SavingSettingsFeedback |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| SessionInitiation | Specifies the streaming session initiation status | |
| SessionInitiationFeedback |
Reports the current streaming session initiation status
The DMSystemChange event will trigger with the SessionInitiationEventId. | |
| StreamBitrate | Property to set the stream bitrate. | |
| StreamBitrateFeedback | Property to return the stream bitrate. | |
| StreamingAudioBass | Adjusts the bass settings for the streaming audio output in tenths of a dB. Valid values range from -150 (-15dB) to 150 (+15dB). | |
| StreamingAudioBassFeedback |
Reports the bass settings for the streaming audio output in tenths of a dB.
Valid values range from -150 (-15dB) to 150 (+15dB).
The DMSystemChange event will trigger with the StreamingBassEventId. | |
| StreamingAudioMuteFeedback |
Indicates that streaming output audio is muted.
The DMSystemChange event will trigger with StreamingAudioMuteEventId. | |
| StreamingAudioUnmuteFeedback |
Indicates that the output audio is not muted.
The DMSystemChange event will trigger with StreamingAudioUnmuteEventId. | |
| StreamingAudioVolume | Property to set the current streaming audio volume in tenths of a dB. Valid values range from -800 (-80dB) to 0 (0dB). | |
| StreamingAudioVolumeFeedback |
Reports the current streaming audio volume in tenths of a dB.
Valid values range from -800 (-80dB) to 0 (0dB).
The DMSystemChange event will trigger with the StreamingVolumeEventId. | |
| StreamingBuffer |
Property to set the length of video that will be cached in milliseconds.
Valid values range from 50 to 5000, where 1 = 1 ms. | |
| StreamingBufferFeedback |
Property to return the length of video that will be cached in milliseconds.
Valid values range from 50 to 5000, where 1 = 1 ms. The DMSystemChange event will trigger with the StreamingBufferEventId. | |
| StreamingDeviceMode | Property to set the streaming device mode. | |
| StreamingDeviceProcessingBusy |
Indicates that the streaming device is changing state (starting the stream, stopping the stream, etc) and is busy.
Please wait until the signal is 'false' before sending commands to the device. 'true' = busy; 'false' = not busy The DMSystemChange event will trigger with StreamingDeviceProcessingBusyFeedbackEventId. | |
| StreamingDeviceReadyFeedback |
Indicates that the device is ready to start streaming or preview video.
The device may not be ready if the IP address has changed or another system event has caused a re-configuration. The appropriate feedback for those parameters should be checked to ensure that the stream starts correctly. Start signals will be ignored until the device is ready to start streaming. 'true' = Device is ready; 'false' = Device is not ready. The DMSystemChange event will trigger with StreamingDeviceReadyFeedbackEventId. | |
| StreamingElapsedSecondsFeedback |
Indicates the time elapsed (in seconds) since streaming was started.
The DMSystemChange event will trigger with the ElapsedSecondsFeedbackEventId. | |
| StreamingInitiatorAddressFeedback |
Property to return the streaming Initiator Address.
The DMSystemChange event will trigger with the StreamingInitiatorAddressFeedbackEventId. | |
| StreamingMulticastAddress |
Specifies the multicast address to which the streaming device will try to transmit
whenSessionInitiation is in MulticastViaUDP. | |
| StreamingMulticastAddressFeedback |
Indicates the multicast address from which the streaming device is receiving
whenSessionInitiation is in MulticastViaRTSPor in MulticastViaUDP. The DMSystemChange event will trigger with the MulticastAddressEventId. | |
| StreamingPauseFeedback |
Indicates that the stream is paused.
The output remains 'true' for as long as the stream is paused.
The DMSystemChange event will trigger with StreamingPauseFeedbackEventId. | |
| StreamingServerUrl | Property to set the Server URL. | |
| StreamingServerUrlFeedback |
Property to return the current Server URL.
The DMSystemChange event will trigger with the ServerUrlEventId. | |
| StreamingStartFeedback |
Indicates if streaming has started.
'true' = Streaming started; 'false' = Streaming has not started.
The DMSystemChange event will trigger with StreamingStartFeedbackEventId. | |
| StreamingStatusFeedback |
Property to report the streaming status.
The DMSystemChange event will trigger with the StreamingStatusFeedbackEventId. Valid values are: 0 - Stream stopped, 1 - Stream started, 2 - Stream paused, 3 - Connecting, Other values are reserved. | |
| StreamingStatusTextFeedback |
Property to return the streaming status text.
The DMSystemChange event will trigger with the StreamingStatusTextFeedbackEventId. | |
| StreamingStopFeedback |
Indicates the stream status.
'true' = Stream stopped; 'false' = Stream not stopped.
The DMSystemChange event will trigger with StreamingStopFeedbackEventId. | |
| StreamingTransportMode |
Property to set the Streaming Transport Mode.
Note: StreamingTransportMode must be set prior to triggering StreamingStart. | |
| StreamingTransportModeFeedback |
Property to report the current Streaming Transport Mode.
The DMSystemChange event will trigger with the StreamingTransportModeEventId. | |
| StreamingTreble | Adjusts the treble settings for the streaming output in tenths of a dB. Valid values range from -150 (-15dB) to 150 (+15dB). | |
| StreamingTrebleFeedback |
Returns the current treble settings for the specified streaming output.
Valid values range from -150 (-15dB) to 150 (+15dB).
The DMSystemChange event will trigger with the StreamingTrebleEventId. | |
| StreamingUserName | Specifies the user name for the stream. The user name can consist of up to 200 characters. | |
| StreamingUserNameFeedback |
Text string that reports the user name used for the stream.
The DMSystemChange event will trigger with the StreamingUserNameEventId. | |
| StreamPassword | Sets the password for the stream. The password can consist of up to 200 characters. | |
| StreamPasswordFeedback |
Text string that reports the password used for the stream.
The DMSystemChange event will trigger with the StreamingPasswordEventId. | |
| StreamPasswordProtectionDisableFeedback |
Indicates the status of the password protection on the stream.
'true = Password disabled; 'false' = password enabled.
The DMSystemChange event will trigger with PasswordProtectionDisabledEventId. | |
| StreamPasswordProtectionEnableFeedback |
Indicates the status of the password protection on the stream.
'true' = Password enabled; 'false' = password disabled.
The DMSystemChange event will trigger with PasswordProtectionEnabledEventId. | |
| StreamProfile | Property to set the stream profile. | |
| StreamProfileFeedback |
Property to return the stream profile.
The DMSystemChange event will trigger with the StreamProfileEventId. | |
| SystemControlType |
Property to determine what type of switcher we are in.
(Inherited from Dmps3SystemControl) | |
| SystemId |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| SystemIdBusyFeedback |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| SystemIdFeedback |
Indicates the current System ID (if Private Network Mode is enabled).
The DMSystemChange event will trigger with the SystemIdEventId. (Inherited from Dmps3SystemControl) | |
| SystemPowerButtonPressedFeedBack |
Indicates if the system power button on the front panel is being pressed.
The DMSystemChange event will trigger with the SystemPowerButtonEventId. (Inherited from Dmps3SystemControl) | |
| SystemPowerOffFeedBack |
Indicates if system power is off.
The DMSystemChange event will trigger with the SystemPowerOffEventId. (Inherited from Dmps3SystemControl) | |
| SystemPowerOnFeedBack |
Indicates if system power is on
The DMSystemChange event will trigger with the SystemPowerOnEventId. (Inherited from Dmps3SystemControl) | |
| USBEnter |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) | |
| VideoEnter |
This signal is not implemented for the DMPS3.
(Inherited from Dmps3SystemControl) |
| Name | Description | |
|---|---|---|
| DisableStreamPasswordProtection | Disables password protection on the stream. | |
| EnableStreamPasswordProtection | Enables password protection of stream. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| FrontPanelBrightness |
Sets the front panel brightness to the specified setting.
(Inherited from Dmps3SystemControl) | |
| FrontPanelLockOff |
Unlocks the front panel. This signifies that AV routing can be done from the front panel.
(Inherited from Dmps3SystemControl) | |
| FrontPanelLockOn |
Locks out the front panel. This signifies that no AV routing can be done from the front panel.
(Inherited from Dmps3SystemControl) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| StreamingAudioMute | Mutes the stream output audio. | |
| StreamingAudioUnmuted | Unmutes the streaming output audio. | |
| StreamingPause |
Pause the streaming.
Note: although the incoming video to the encoder is paused (frozen),the stream will continue playing and the elapsed time counter will continue in the paused state.This allows a freeze frame to be displayed if the user does not want live video to be transmitted. | |
| StreamingStart | Start the streaming. | |
| StreamingStop | Stops the streaming | |
| SystemPowerOff |
Turn the system power off.
(Inherited from Dmps3SystemControl) | |
| SystemPowerOn |
Turn the system power on.
(Inherited from Dmps3SystemControl) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |