Click or drag to resize

DmNaxXsp Class

DM-NAX-XSP Device class. This class will trigger DMSystemChange, DMOutputChange and DMInputChange.
Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.DM
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public sealed class DmNaxXsp : HdCtlNaxDspBase

The DmNaxXsp type exposes the following members.

Constructors
 NameDescription
Public methodDmNaxXsp Constructor of "DM-NAX-XSP" device class.
Top
Properties
 NameDescription
Public propertyAudioInputs Collection of audio inputs on this device. This property is not supported by HdCtl101, HdMd2x18k.

This property will trigger DMInputChange event with DMInputEventIds.


(Inherited from HdCtlNaxDspBase)
Public propertyAudioOutputs Collection of audio outputs on this device. This property is not supported by HdCtl101, HdMd2x18k

This property will trigger DMInputChange event with DMInputEventIds.


(Inherited from HdCtlNaxDspBase)
Public propertyAudioSource Property to set the audio source. To set to no audio source, set this property value to null. This property will return null when no audio source is selected.
(Inherited from HdCtlNaxDspBase)
Public propertyAudioSourceFeedback Property to indicate current auido source. This property will return null if no audio source is selected or an invalid audio source is selected. Valid audio sources are available in the collection Inputs. This property will trigger DMSystemChange with AudioSourceFeedbackEventId event id.
(Inherited from HdCtlNaxDspBase)
Public propertyAutoAudioSelectionDisabledFeedback Property to indicate if the auto audio selection is disabled. This property will trigger DMSystemChange with AutoAudioSelectionDisabledEventId event id.
(Inherited from HdCtlNaxDspBase)
Public propertyAutoAudioSelectionEnabledFeedback Property to indicate if the auto audio selection is enabled. This property will trigger DMSystemChange with AutoAudioSelectionEnabledEventId event id.
(Inherited from HdCtlNaxDspBase)
Public propertyComPorts Collection of com ports on the device.
(Inherited from HdCtlBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDigitalInputPorts Collection of digital input ports on the device.
(Inherited from HdCtlBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableUSBBreakaway Enables USB breakaway for as long as the input is 'true'. This allows USB to be routed independently from video. If USB breakaway is not enabled, the USB routes will follow the selected video routes, and the "USBOut#" inputs will have no effect. 'true' (level-sensitive) = Enable USB breakaway; 'false' = Disable USB breakaway This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Public propertyEnableUSBBreakawayFeedback Indicates that USB breakaway is enabled. The output remains high for as long as USB breakaway is enabled. 'true' = USB breakaway enabled; 'false' = USB breakaway disabled This property is not supported by HD-RX-4K-X01 switches

The DMSystemChange event will trigger with the USBBreakawayEventId if the switcher is a device.


(Inherited from Switch)
Public propertyFirmwareVersionFeedback Reports the current firmware version of the unit.

This property will trigger DMSystemChange event with FirmwareVersionFeedbackEventId.


(Inherited from HdCtlBase)
Public propertyHdmiInputs Collection of hdmi input objects.

This property will trigger DMInputChange event with DMInputEventIds.


(Inherited from HdCtlBase)
Public propertyHdmiOutput Collection of hdmi output objects.

This property will trigger DMOutputChange event with DMOutputEventIds.


(Inherited from HdCtlBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyInputs Get Collection of inputs for this switch
(Inherited from Switch)
Public propertyIROutputPorts Collection of ir output ports on the device.
(Inherited from HdCtlBase)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyModelNameFeedback Property to report the model name of the unit.

This property will trigger DMSystemChange event with ModelNameFeedbackEventId.


(Inherited from HdCtlBase)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNax Property to access nax object. This property is not supported by HdCtl101, HdMd2x18k

This property will trigger NaxPropertyChange, NaxTxRxPropertyChange and NaxTxRxPropertyChange events with DmNaxXEventIds.


(Inherited from HdCtlNaxDspBase)
Public propertyNetwork Property to access the Network settings. This property triggers the NetworkChange event.
(Inherited from HdCtlBase)
Public propertyNumberOfComPorts Number of com ports this device supports.
(Inherited from HdCtlBase)
Public propertyNumberOfDigitalInputPorts Number of digital input ports this device supports.
(Inherited from HdCtlBase)
Public propertyNumberOfInputs Number of Input Channels on this switch
(Inherited from Switch)
Public propertyNumberOfIROutputPorts Number of ir output ports this device supports.
(Inherited from HdCtlBase)
Public propertyNumberOfOutputs Number of Output Channels on this switch
(Inherited from Switch)
Public propertyNumberOfRelayPorts Number of relay ports this device supports.
(Inherited from HdCtlBase)
Public propertyOutputs Get Collection of outputs for this switch
(Inherited from Switch)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRelayPorts Collection of relay ports on the device.
(Inherited from HdCtlBase)
Public propertySerialNumberFeedback Property to report the serial number of the unit.

This property will trigger DMSystemChange event with SerialNumberFeedbackEventId.


(Inherited from HdCtlBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySurroundSound SurroundSound Object on this device.
Public propertySwitchType The type of DM switcher
(Inherited from Switch)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUSBEnter Enables the "Output#_USBRoutedTo" or "Input#_USBRoutedTo" source selection analogs for as long as the input is 'true'. When the input is 'false', the analogs have no effect. 'true' (level-sensitive) = Enable USB; 'false' = Disable USB This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyVideoEnter Enables the "VideoOut#" video source selection analogs for as long as the input is 'true'. When the input is 'false', the analogs have no effect. 'true' (level-sensitive) = Enable video; 'false' = Disable video This property is not supported by HD-RX-4K-X01 switches
(Inherited from Switch)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
Methods
 NameDescription
Public methodDisableAutoAudioSelection Method to disable auto audio selection mode.
(Inherited from HdCtlNaxDspBase)
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from GenericDevice)
Public methodEnableAutoAudioSelection Method to enable auto audio selection mode. When enabled, HDMI In audio will be routed NAX Out and HDMI Out. When the device detects eARC audio, eARC audio will be routed to NAX Out. Manual audio source selection shall continue to work in auto mode for NAX out and HDMI out eARC audio source is not applicable for the HDMI Out and shall be grayed out for the HDMI output.
(Inherited from HdCtlNaxDspBase)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodinitializeNax Init joins specific to HD-CTL-NAX, DM-NAX-XSP.
(Inherited from HdCtlNaxDspBase)
Protected methodinitializeNaxDsp Init joins specific to DM-NAX-XSP.
(Inherited from HdCtlNaxDspBase)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventDMInputChange Handle DM Input Events EventIds for this event are located in the DMInputEventIds class.
(Inherited from Switch)
Public eventDMOutputChange Handle DM Output Events EventIds for this event are located in the DMOutputEventIds class.
(Inherited from Switch)
Public eventDMSystemChange Event to handle general switch events EventIds for this event are located in the DMSystemEventIds class.
(Inherited from Switch)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also