Click or drag to resize

IDmps3OutputMixerWithMonoAndStereo Interface

Interface to expose common mono and stereo control to DMPS3 output mixers.

Namespace: Crestron.SimplSharpPro.DM
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public interface IDmps3OutputMixerWithMonoAndStereo : IDmps3OutputMixer

The IDmps3OutputMixerWithMonoAndStereo type exposes the following members.

Properties
 NameDescription
Public propertyDelay Sets the delay level.
(Inherited from IDmps3OutputMixer)
Public propertyDelayFeedback Reports the current delay level.
(Inherited from IDmps3OutputMixer)
Public propertyMaxVolume Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox.
(Inherited from IDmps3OutputMixer)
Public propertyMaxVolumeFeedback Reports the current maximum volume gain, in tenths of a dB.
(Inherited from IDmps3OutputMixer)
Public propertyMicLevel Property to set the value of the level for a given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public propertyMicLevelFeedback Property to read the feedback level for a given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public propertyMicMuteOffFeedback Property to return the state of the MicMuteOffFeedback for a given microphone on this output
(Inherited from IDmps3OutputMixer)
Public propertyMicMuteOnFeedback Property to return the state of the MicMuteOnFeedback for a given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public propertyMicPan Property to set the value of the pan for a given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public propertyMicPanFeedback Property to read the pan level for a given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public propertyMinVolume Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox.
(Inherited from IDmps3OutputMixer)
Public propertyMinVolumeFeedback Reports the current minimum volume gain, in tenths of a dB.
(Inherited from IDmps3OutputMixer)
Public propertyMixerBypassedFeedback Indicates that the routed audio input is in mixer bypass mode. Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM. On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer. The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted. Mixer bypass mode is only controllable via the DMPS Tool.
(Inherited from IDmps3OutputMixer)
Public propertyMonoOutputFeedback Indicates that the DM output is in mono. The output remains true for as long as mono mode is active. This output will be asserted whether mono mode is enabled via MonoOutput() method or if the Program Output is set to 70V/100V mode.
Public propertyOutputMixerType The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from IDmps3OutputMixer)
Public propertyOutputVuFeedback Reports the VU meter feedback value, when VU feedback is enabled.
(Inherited from IDmps3OutputMixer)
Public propertyStartupVolume Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on.
(Inherited from IDmps3OutputMixer)
Public propertyStartupVolumeFeedback Reports the current startup volume in tenths of a dB.
(Inherited from IDmps3OutputMixer)
Public propertyStereoOutputFeedback Indicates that the DM output is in stereo. The output remains true for as long as stereo mode is active.
Top
Methods
 NameDescription
Public methodMicMuteOff UnMute the given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public methodMicMuteOn Mute the given microphone on this output.
(Inherited from IDmps3OutputMixer)
Public methodMonoOutput Set the DM output to Mono Mode.
Public methodStereoOutput Sets the DM output to stereo mode. This input will not have effect if the Program Output is set to 70V/100V mode.
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also