DmcStrControleSessionInitiation Enumeration |
Namespace: Crestron.SimplSharpPro.DM.CardsAssembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntaxpublic enum eSessionInitiation
Members| Member name | Value | Description |
|---|
| ByReceiver | 0 |
The card waits for a connection from a receiving device.
The client connects to the URL specified in ClientUrlFeedback and the server
connects to the URL specified in the ServerUrlFeedback.
This is a unicast stream.
If multiple clients connect, the packets are duplicated for each client.
For example, if the DMC-STRO is configured to provide a 5000kbps stream and one client connects, 5000kbps is generated.
However, if a second client connects, the stream is duplicated consuming 10kbps total.
The DMC-STRO can support up to 25000kbps after which point, degradation in the video quality may be observed.
There is no limit imposed to the number of connections allowed.
|
| ByTransmitter | 1 |
The transmitter connects to the IP specified in TargetAddress.
In this case, there is not RTSP exchange, so the decoder must be prepared to receive the stream.
Consult your decoder’s documentation to configure it to receive streams.
|
| MulticastViaRTSP | 2 |
Multicast via RTSP. The device still accepts RTSP requests, but sends back a multicast address instead of unicasting.
This is useful when you need to setup one stream and then have all touch panels connect to it.
The multicast address is specified in MulticastAddress. The client connects
to the address specified in ClientUrlFeedback and the server
connects to the URL specified in the ServerUrlFeedback.
|
| MulticastViaUDP | 3 |
The device streams raw UPD to a multicast address and does not have RTSP.
The stream is always on and clients can connect to it (this also has the advantage of not needing to restart the stream if something goes wrong).
|
Version Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also