Click or drag to resize

Crestron.SimplSharpPro.DM.Cards Namespace

 
Classes
 ClassDescription
Public classCard Hardwired Inputs and Output Types
Public classCardDm6x1DmOutAdvanced DMS DM Out Advanced output for the 6x1
Public classCardDm6x1HdmiOutput DM HDMI OUTPUT for the DM-MD6x1
Public classCardDmHdmiOutput DM HDMI OUTPUT
Public classCardDMICard Card based Switcher Input Cards
Public classCardDmMd4kHdmiInput Hdmi input for HD-MD8x1-4K and DM-MD8x1-4K-C.
Public classCardDmMd4kVgaInput DMHD-MD8x1-4K VGA Input.
Public classCardDMOCard The card Based Switcher Outputs
Public classCardDmps3AecOutput DPMS3-300 Auto Echo Cancellation Output.
Public classCardDmps3AirMediaInput DMPS3 AirMedia with H.264 Streaming input.
Public classCardDmps3AirMediaNoStreamingInput DMPS3 AirMedia No Streaming Input
Public classCardDmps3AnalogAudioInput DMPS3 Analog Audio Input
Public classCardDmps3Aux1Output DMPS3 Aux1 Output.

This class will trigger the DMOutputChange event.

Public classCardDmps3Aux2Output DMPS3 Aux2 Output
Public classCardDmps3AuxOutput Abstract base class representing the DMPS3 Aux Output. The CardDmps3Aux1Output and CardDmps3Aux2Output classes derive from this class.

This class will trigger the DMOutputChange event.

Public classCardDmps3CodecOutput DMPS3 Codec output. This device has no functions, but exists solely so an input can be routed to it (Audio only)
Public classCardDmps3DialerOutput DMPS3-300 Dialer Output.
Public classCode exampleCardDmps3DigitalMixOutput Class representing the DMPS3 Digital Mix Output.
Public classCardDmps3DmHdmiAudioOutput Class to represent a DM/HDMI/Audio output.
Public classCardDmps3DmInput DMPS3 DM Input.
Public classCardDmps3DmOutput Class representing the DMPS3 DM Output.
Public classCode exampleCardDmps3DmOutputBackend Class representing the DMPS3 DM Output Backend.
Public classCardDmps3HdmiAudioOutput Represents an HDMI/Audio output.
Public classCardDmps3HdmiAudioOutputDmps3AudioOutputStream Audio Output stream for Analog Outputs on DM Systems.
Public classCardDmps3HdmiAudioOutputDmps3DmHdmiOutputStream DM/HDMI Output stream settings for both the DM and HDMI Outputs of a DMPS3 System.
Public classCardDmps3HdmiInput DMPS3 HDMI Input.
Public classCardDmps3HdmiInputWithoutAnalogAudio HDMI Input that contains no corresponding Analog Input
Public classCardDmps3HdmiOutput Class representing the DMPS3 HDMI Output.
Public classCode exampleCardDmps3HdmiOutputBackend Class representing the DMPS3 HDMI Output Backend.
Public classCardDmps3HdmiVgaBncInput DMPS3 HDMI/VGA/BNC Input.
Public classCardDmps3HdmiVgaInput DMPS3 HDMI/VGA Input.
Public classCardDmps3OutputBase Base class for the DMPS3 output cards with common functions.
Public classCardDmps3ProgramOutput Class representing the DMPS3 Program Output.

This class will trigger the DMOutputChange event.

Public classCardDmps3SipInput DMPS3 SIP Input.
Public classCardDmps3StreamingReceive DMPS3 Streaming Receive
Public classCardDmps3StreamingTransmit DMPS3 Streaming Transmit.
Public classCode exampleCardDmps3VgaInput DMPS3 VGA Input.
Public classCardDmsBncAnalogSpdifAdvanced DMS DNC Analog SPDIF Advanced
Public classCardDmsCatHdAdvanced The Module includes one IPID for direct connection with a DM transmitter Video and audio status reporting.
Public classCardDmsCatOHd DMS CATO HD Output
Public classCardDmsDmOutAdvanced DMS DM Out Advanced
Public classCardDmsHdmiInAdvanced DMS-HDMI-In-Advanced Video and audio status reporting.
Public classCardDmsHdmiInUhpAdvanced DMS-HDMI-IN-UHP-Advanced Video and audio status reporting.
Public classCardDmsHdmiRxAdvanced DMS HDMI Rx Advanced
Public classCardDmsVgaAnalogAdvanced DMS VGA AnalogAdvanced
Public classCardHdmiRxAdvanced HDMI-RX-ADVANCED Hardwired card used by the HD-MD8x1 and HD-MD8x2
Public classCardHdmiTx DMS-CATO-HD Output Hardwired card used by HD-MD8x1
Public classCardDevice Base class of DM cards.
Public classDmc4kC The DMCI-DMC-4K-C provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classDmc4kCBase Base class for Dmc4kC and "Dmc4kzC".
Public classDmc4kCDsp The DMCI-DMC-4K-C-DSP provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classDmc4kCDspBase Base class for Dmc4kCDsp and "Dmc4kzCDsp".
Public classDmc4kCoA The DMC-4K-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4K-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kCoA and DM OUT 2 is Dmc4kCoB.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmc4kCoB The DMC-4K-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4K-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kCoA and DM OUT 2 is Dmc4kCoB.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmc4kCoHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-4K-CO-HD single output card module takes up a single slot on a switcher.
Public classDmc4kCoHdSingleBase Base class for Dmc4kCoHdSingle and "Dmc4kzCoHdSingle".
Public classDmc4kHd The DMC-4K-HD provides 1 HDMI input labeled HDMI IN. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4K-HD also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmc4kHdBase Base class for Dmc4kHd and "Dmc4kzHd".
Public classDmc4kHdDsp The DMC-4K-HD-DSP provides 1 HDMI input labeled HDMI IN. The DMC-4K-HD-DSP provides all of the features of the DMC-HD with the addition of internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4K-HD-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmc4kHdDspBase Base class for Dmc4kHdDsp and "Dmc4kzHdDsp".
Public classDmc4kHdo The DMC-4K-HDO provides a 4K HDMI output.

This class will trigger DMOutputChange, CecChange, AttributeChange, DeviceInformationChange and OutputChange events.

Public classCode exampleDmc4kHdoSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-4K-HDO single output card module takes up a single slot on a switcher.
Public classCode exampleDmc4kzC The DMCI-DMC-4KZ-C provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classCode exampleDmc4kzCDsp The DMCI-DMC-4KZ-C-DSP provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classDmc4kzCoA The DMC-4KZ-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4KZ-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kzCoA and DM OUT 2 is Dmc4kzCoB.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmc4kzCoB The DMC-4KZ-CO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-4KZ-HD provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is Dmc4kzCoA and DM OUT 2 is Dmc4kzCoB.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classCode exampleDmc4kzCoHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-4K-CO-HD single output card module takes up a single slot on a switcher.
Public classCode exampleDmc4kzHd The DMC-4KZ-HD provides 1 HDMI input labeled HDMI IN. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4KZ-HD also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classCode exampleDmc4kzHdDsp The DMC-4KZ-HD-DSP provides 1 HDMI input labeled HDMI IN. The DMC-4KZ-HD-DSP provides all of the features of the DMC-HD with the addition of internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-4KZ-HD-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classCode exampleDmc4kzHdoSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-4KZ-HDO single output card module takes up a single slot on a switcher.
Public classDmcC The DMCI-DMC-C provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcCat The DMC-CAT provides (1) set of (2) RJ45 Digital Media inputs, labeled "D" and "M". The "D" input receives video and audio from the "D" output of a DM transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" output of the DM transmitter or output card. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-CAT also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcCatDsp The DMC-CAT-DSP provides (1) set of (2) RJ45 Digital Media inputs, labeled "D" and "M". The "D" input receives video and audio from the "D" output of a DM transmitter or output card.The "M" input receives HDCP, EDID, and USB data from the "M" output of the DM transmitter or output card. The DMC-CAT-DSP provides an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-CAT-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcCatoHdA The DMC-CATO-HD provides two RJ45 Digital Media (DM) outputs, labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver. The DMC-CATO-HD also provides one local HDMI output, configured in parallel with DM Output #1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a remote display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcCatoHdB The DMC-CATO-HD provides two RJ45 Digital Media (DM) outputs, labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver. The DMC-CATO-HD also provides one local HDMI output, configured in parallel with DM Output #1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a remote display device.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcCatoHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-CATO-HD single output card module takes up a single slot on a switcher.
Public classDmcCDsp The DMCI-DMC-C-DSP provides (1) DigitalMedia (DM) input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card. The card also provides (1) PoE (Power over Ethernet) connector labeled POE IN that can supply power to the connected transmitter. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the transmitter. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcCoBaseA The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmcCoHdA and DM OUT 2 is DmcCoHdB.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcCoBaseB The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmcCoHdA and DM OUT 2 is DmcCoHdB.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcCoHdA The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmcCoHdA and DM OUT 2 is DmcCoHdB.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcCoHdB The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmcCoHdA and DM OUT 2 is DmcCoHdB.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcCoHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-CO-HD single output card module takes up a single slot on a switcher.
Public classDmcDvi The DMC-DVI is a DVI/RGB video card. The DMC-DVI provides one DVI digital video input or analog RGB/YPbPr input (labeled DVI-I) and a balanced/unbalanced audio input (labeled AUDIO IN) that accepts stereo line-level audio. The USB HID port is a Type B port for connection to a USB host. The DMC-DVI also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcF The DMC-F is a video card compatible with the input card slots of a DigitalMedia switcher. The DMC-F provides one DigitalMedia fiber input labeled FIBER IN. The "D" input receives video and audio from the "D" output of a DM fiber transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" input of the DM fiber transmitter or output card. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.The DMC-F also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcFDsp The DMC-F-DSP is a video card compatible with the input card slots of a DigitalMedia switcher. The DMC-F-DSP provides one DigitalMedia fiber input labeled FIBER IN. The "D" input receives video and audio from the "D" output of a DM fiber transmitter or output card. The "M" input receives HDCP, EDID, and USB data from the "M" input of the DM fiber transmitter or output card. The DMC-F-DSP provides an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.The DMC-F-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcFo The DMC-FO is an output card compatible with the output card slots of a DMCO enclosure. The DMC-FO provides two fiber optic Digital Media (DM) outputs, each labeled "D" and "M". The "D" output transmits video and audio to the "D" input of a DigitalMedia receiver such as the DmRmc100F. The "M" output transmits HDCP, EDID, and USB data to the "M" input of the DM receiver.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcFoSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-FO single output card module takes up a single slot on a switcher.
Public classDmcHd The DMC-HD is an HDMI video card compatible with the input card slots of the DigitalMedia switcher. The DMC-HD provides 1 HDMI input labeled HDMI IN. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-HD also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcHdDsp The DMC-HD-DSP provides 1 HDMI input labeled HDMI IN. The DMC-HD-DSP provides all of the features of the DMC-HD with the addition of internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the HDMI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The USB HID port is a Type B port for connection to a USB host. The DMC-HD-DSP also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcHdo The DMC-HDO provides an HDMI output.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcHdoSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-HDO single output card module takes up a single slot on a switcher.
Public classDmco10 Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-10

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmco11 Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-11

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmco22 Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-22

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco30 The DMC-HDO provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco33 Provides Two DMC-HDO output cards. Each card provides two stereo audio outputs, break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco40 The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco43 The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) and two HDMI outputs. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco44 Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-44

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco45 The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) and two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco50 The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco53 Provides two DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. Also provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco55 The DMC-CO-HD provides four DigitalMedia (DM) output connectors labeled DM OUT 1(DmcCoHdA) and DM OUT 2(DmcCoHdB). Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco60 DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco63 Crestron DMCO output cards are DigitalMedia enclosures compatible with the output card slots of Crestron's DigitalMedia switchers. Each enclosure provides programming slots that hold fixed combinations of DMC output cards. DMCO-63

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco64 DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (4) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC. Two are SO type and two are S2O type. (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco65 The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S and two DigitalMedia (DM) output connectors. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco66 DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco70 The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment.

This class will trigger DMOutputChange and AttributeChange events.

Public classDmco73 The DMCO-73 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DMC-HDO output card. The card provides two stereo audio outputs, break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

This class will trigger DMOutputChange, AttributeChange, CecChange, and DeviceInformationChange events.

Public classDmco74 The DMCO-74 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also provides a DigitalMedia 8G™ Fiber output connector labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S.

This class will trigger DMOutputChange, DeviceInformationChange, CecChange and AttributeChange events.

Public classDmco75 The DMCO-75 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DM output, transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, DeviceInformationChange, CecChange and AttributeChange events.

Public classDmco76 The DMCO-76 provides a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment. Also Provides a DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, DeviceInformationChange, CecChange and AttributeChange events.

Public classDmco77 The DMCO-77 has two streaming output cards with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet. This card also provides a number of streaming methods. Please review all available Session Initiation options to select the proper stream type that best suits your environment.

This class will trigger DMOutputChange and AttributeChange events.

Public classDmco80 The DMCO-80 is an output card compatible with the output card slots of a DMCO enclosure. It contains a DMC-4K-CO. This card is the upgrade for the DMCO-50. The DMC-4K-CO provides two 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco83 The DMCO-83 is an output card compatible with the output card slots of a DMCO enclosure. This card is the upgrade for the DMCO-85. It represents one DMC-4K-CO and one DMC-HDO card. The DMC-4K-CO provides 2 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1, 2, 3, and 4. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. Each DMC-4K-CO also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. Each DMC-4K-CO also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. The DMC-HDO provides two HDMI outputs, labeled HDMI 1 and 2. Two stereo audio outputs break out the stereo audio signal from each HDMI output and pass it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmco88 The DMCO-88 is an output card compatible with the output card slots of a DMCO enclosure. This card is the upgrade for the DMCO-55. It represents two DMC-4K-CO cards. It provides 4 4K compliant DigitalMedia (DM) output connectors labeled DM OUT 1, 2, 3, and 4. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. Each DMC-4K-CO also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. Each DMC-4K-CO also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcOutputSingle Base class to the DMC single output card modules.
Public classDmcS The DMC-S is a DigitalMedia 8G™ multimode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia SC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length of 1000 feet. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device.
Public classDmcS2 The DMC-S2 is a DigitalMedia 8G™ single mode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia LC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length over 10 miles. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device.
Public classDmcS2Dsp The DMC-S2-DSP is a DigitalMedia 8G™ single mode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia LC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length over 10 miles. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device. The DSP model includes an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio.
Public classDmcS2oHdA The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The card also provides one local HDMI output, configured in parallel with Output 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcS2oHdB The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DM-RMC-100-S. The S2 version employs a different type of fiber that travels over 50 times further than the S version.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcS2oHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-S2O-HD single output card module takes up a single slot on a switcher.
Public classDmcSBase Base class for the DmcS cards.
Public classDmcSdi The DMC-SDI is an SDI video card. The card supports SD-SDI, HD-SDI and 3G-SDI formats, handling high-definition video signals up to 1080p60, and up to 8 channels of 24-bit digital audio. The DMC-SDI provides (1) SDI input labeled SDI IN. An SDI loop-through output (labeled SDI OUT) is included for connection to a local monitor or other SDI device. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the SDI input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides (1) HDMI local output port labeled HDMI OUT for feedthrough to a local display device.
Public classDmcSDsp The DMC-S-DSP is a DigitalMedia 8G™ multimode fiber video card compatible with the input card slots of a DigitalMedia switcher. The video card provides (1) DigitalMedia SC input connector labeled DM IN that receives video, audio, HDCP, EDID and USB data from a DM transmitter or output card, with a maximum length of 1000 feet. The RCA audio output (labeled AUDIO OUT L/R) breaks out the stereo audio signal from the DM input and passes it through to feed a CNX-PAD8A, AAE, or other multi-room audio distribution system. The card also provides one HDMI output port labeled HDMI OUT for feedthrough to a local display device. The DSP model includes an internal DSP to enable the simultaneous distribution of uncompressed 7.1 channel HD surround sound and 2-channel audio.
Public classDmcSoHdA The DMC-SO-HD and DMC-S2O-HD are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DmRmc100S. The card also provides one local HDMI output, configured in parallel with the DM port. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device.

This class will trigger DMOutputChange, CecChange and DeviceInformationChange events.

Public classDmcSoHdB The DmcSoHdA, DmcSoHdB, DmcS2oHdA and DmcS2oHdB are output cards compatible with the output card slots of a DMCO enclosure. The card provides two (2) DigitalMedia 8G™ Fiber output connectors labeled MMF/SC (Multi-Mode Fiber/SC-Type Connector) that transmit video, audio, HDCP, EDID and USB data to a DigitalMedia receiver such as the DmRmc100S.

This class will trigger DMOutputChange and DeviceInformationChange events.

Public classDmcSoHdSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-SO-HD single output card module takes up a single slot on a switcher.
Public classDmcStr DMC-STR Streaming Input Card

This class will trigger BaseEvent, DMInputChange, AttributeChange, CecChange and DeviceInformationChange events.

Public classDmcStrControl Class to define the Common Control Sigs of Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77, DmcStroSingle, DmcStr, DmcStrCresnet and "DmTxRx100Str" cards.

This class will trigger BaseEvent, DMInputChange and DMOutputChange events.

Public classDmcStrCresnet DMCI-DMC-STR Streaming Input Card Class for interfacing through Cresnet.

This class will trigger BaseEvent, DMInputChange, AttributeChange, CecChange and DeviceInformationChange events.

Public classDmcStriControl Class to define the Control Sigs for DmcStr/DmcStrCresnet and "DmTxRx100Str".

This class will trigger BaseEvent and DMInputChange events.

Public classDmcStroAV The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

This class will trigger DMOutputChange and AttributeChange events.

Public classDmcStroControl The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

This class will trigger DMOutputChange event.

Public classDmcStroE The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

This class will trigger DMOutputChange event.

Public classDmcStroSingle Crestron output cards are compatible with the output card slots of Crestron's DigitalMedia switchers. The DMC-STRO single output card module takes up a single slot on a switcher.
Public classDmcVga The DMC-VGA is a VGA video card that is compatible with the input card slots of a DigitalMedia switcher. The DMC-VGA features an analog device receiver and VGA connector.
Public classDmcVid4 The DMC-VID4 is a security camera card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID4 provides 4 RCA composite video inputs labeled COMPOSITE IN 1 through COMPOSITE IN 4. Up to four security cameras can be viewed simultaneously in four video windows, each with dynamic colored text overlay. The DMC-VID4 also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcVidBase base class for the DmcDiv cards
Public classDmcVidBnc The DMC-VID-BNC is a BNC video input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-BNC provides (1) set of (3) BNC video inputs that accept composite video, S-Video and component HDTV signals, and a balanced/unbalanced audio input (labeled AUDIO IN) that accepts stereo line-level audio. The DMC-VID-BNC also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcVidRcaA The DMC-VID-RCA-D is an input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-RCA-D provides one analog video input and one S/PDIF coaxial digital audio input. The DMC-VID-RCA-D accepts composite video, S-Video and component HDTV signals. The S/PDIF input supports 2-channel stereo and 5.1 surround-encoded digital audio sources. The DMC-VID-RCA-D also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmcVidRcaD The DMC-VID-RCA-D is an input card compatible with the input card slots of the DigitalMedia switcher. The DMC-VID-RCA-D provides one analog video input and one S/PDIF coaxial digital audio input. The DMC-VID-RCA-D accepts composite video, S-Video and component HDTV signals. The S/PDIF input supports 2-channel stereo and 5.1 surround-encoded digital audio sources. The DMC-VID-RCA-D also provides one HDMI local output port labeled HDMI OUT for feedthrough to a local device.
Public classDmOutputModuleBase Base class for DM output modules.

This class will trigger BaseEvent and DMOutputChange events.

Enumerations
 EnumerationDescription
Public enumerationDmcStreOsdLocations Enum to define OSD Location values used for DmcStr, DmcStrCresnet and "DmTxRx100Str" Devices.
Public enumerationDmcStreScreenResolutions Enum to define the valid Screen Resolutions for DmcStr and DmcStrCresnet.
Public enumerationDmcStreTimesetMethods Enum to define the Timeset Methods for DmcStr and DmcStrCresnet.
Public enumerationDmcStrControleSessionInitiation Session initiation status enum definition for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77, DmcStroSingle, DmcStr, DmcStrCresnet and "DmTxRx100Str".
Public enumerationDmcStrControleStreamProfile Video stream profile enum definition for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77, DmcStroSingle, DmcStr, DmcStrCresnet and "DmTxRx100Str".
Public enumerationDmcStroControleStreamFormat The format (resolution) of the video stream
Public enumerationDmcVid4eSelectFullScreen the video input to display.
Public enumerationeDmSwitcherCards List of supported Cards
Public enumerationeHdmiHdcpState Enums for Hdmi Hdcp State