CardDmps |
public class Dmps3AirMediaInput : DMInput, IDmCardStreamBase
The CardDmps3AirMediaInput type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioVideoSource |
Select the Audio and Video Source for CardDmps3AirMediaInput.
To allow autoswitching between AirMedia and H.264: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = Auto To switch to AirMedia: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = AirMedia To switch to H.264: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = H264 | |
| AudioVideoSourceFeedback |
Reports the active audio and video source.
The DMInputChange event will trigger with AudioVideoSourceEventId. | |
| BaseDevice |
The base switcher device this input/output belongs to.
(Inherited from DMInputOutputBase) | |
| Card |
Access to the plugged in card
(Inherited from DMInputOutputBase) | |
| CardInputOutputType |
This will dictate the type of card in the switcher for DMPS systems.
See SwitcherInputs and SwitcherOutputs for more details.
(Inherited from DMInputOutputBase) | |
| ContentLanLinkStatusFeedback |
Indicates if an Ethernet link is detected at the content LAN input.
'true = Ethernet link detected; 'false = Ethernet link not detected.
The DMInputChange event will trigger with ContentLanLinkStatusEventId. | |
| ContentLanMode | Sets the Content LAN Mode. (Sets which interface to use for streaming) | |
| ContentLanModeFeedback |
Reports the current content LAN mode.
The DMInputChange event will trigger with ContentLanModeEventId. | |
| CurrentDefaultRouterFeedback |
Reports the default router address of the encoder.
The default router address is given in dot decimal notation.
The DMInputChange event will trigger with CurrentDefaultRouterEventId. | |
| CurrentDomainNameFeedback |
Reports the current domain name of the encoder.
The DMInputChange event will trigger with CurrentDomainNameEventId. | |
| CurrentDomainNameServerFeedback |
Reports the current DNS server that is used by the encoder.
The DMInputChange event will trigger with DomainNameServerEventId. | |
| CurrentIpAddressFeedback |
Reports the current IP address of the encoder.
The IP address is given in dot decimal notation.
The DMInputChange event will trigger with CurrentIpAddressEventId. | |
| CurrentSubnetMaskFeedback |
Reports the current subnet mask of the encoder.
The subnet mask is given in dot decimal notation.
The DMInputChange event will trigger with CurrentSubnetMaskEventId. | |
| DisableDhcpFeedback |
Indicates that DHCP (dynamic IP addressing) is disabled.
'true = DHCP Disabled; 'false' = DHCP Enabled
The DMInputChange event will trigger with DisableDhcpEventId. | |
| DisplayControl | Property to get the DMPS3 AirMedia Display Control AirMediaGeneralDisplay. | |
| EnableDhcpFeedback |
Indicates that DHCP (dynamic IP addressing) on the encoder is enabled.
'true = DHCP Enabled; 'false' = DHCP Disabled
The DMInputChange event will trigger with EnableDhcpEventId. | |
| Endpoint |
Route endpoint
(Inherited from DMInputOutputBase) | |
| EndpointNameFeedback | The DMInputChange event will trigger with EndpointNameEventId. Text string that identifies the Endpoint name.(Inherited from DMInputOutputBase) | |
| EndpointOnlineFeedback | On an input the DMInputChange event will trigger with EndpointOnlineEventId On an output the DMOutputChange event will trigger with EndpointOnlineEventId Indicates that the Endpoint is connected and detected at the input or output. The output remains 'true' for as long as the Endpoint is detected. When the endpoint is no longer present, the value changes to false.(Inherited from DMInputOutputBase) | |
| HDBaseTDevice |
Get the current HDBaseTBase attached to this DM Input/Output
(Inherited from DMInputOutputBase) | |
| HostName | Sets the hostname of the encoder. The hostname can consist of up to 63 characters with no spaces. Valid characters are 0 – 9, A – Z and hyphen. The hostname cannot begin with a hyphen or number. | |
| HostNameFeedback |
Reports the hostname of the encoder.
The DMInputChange event will trigger with HostNameEventId. | |
| InputOutput |
The input output device that owns a port.
(Inherited from DMInputOutputBase) | |
| IoType |
The type of input or output
(Inherited from DMInputOutputBase) | |
| MediaConfiguration | Property to get the DMPS3 AirMedia Top Level Media Configuration and Control AirMediaGeneralConfiguration. | |
| Name |
Specifies the name of the corresponding input stream. The name is displayed on the LCD front panel and in DM Tools.
The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space).
Note that on some switcher inputs (such as the DMPS3) the Name may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput) | |
| NameFeedback |
Reports the name of the corresponding input stream.
Note that on some switcher inputs (such as the DMPS3) the NameFeedback may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput) | |
| Number |
The Number of stream input or output
(Inherited from DMInputOutputBase) | |
| OnDm64 |
Property to indicate that this I/O is on a DM64 based switcher.
(Inherited from DMInputOutputBase) | |
| OnDmps |
Property to indicate that this Input/Output is on a DMPS.
(Inherited from DMInputOutputBase) | |
| OnlineFeedback |
Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network.
The output will remain 'true' for as long as the card is online.
'true' = Card online (running); 'false' = Card offline (not running)
(Inherited from DMInputOutputBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from DMInputOutputBase) | |
| PoDMOverpowerFeedback |
Reports the overpower condition of the corresponding DM input or output.
The property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C switchers. On other systems this property returns a null signal. On a supported output card the DMOutputChange event will trigger with PoDMOverpowerFeedbackEventId. On a supported input card the DMInputChange event will trigger with PoDMOverpowerFeedbackEventId. (Inherited from DMInputOutputBase) | |
| PresentFeedback |
Indicates whether the card is physically plugged into the card slot on the DM switcher.
The output will remain 'true' for as long as the card is detected.
'true' = Card present; 'false' = Card not installed
(Inherited from DMInputOutputBase) | |
| StaticDefaultRouter | Sets the static default router address of the encoder. Note that these settings will only be used when DHCP is disabled! | |
| StaticDefaultRouterFeedback |
Report the static default router address of the encoder.
The default router address is given in dot decimal notation.
The DMInputChange event will trigger with StaticDefaultRouterEventId. | |
| StaticDomainName | Sets the static domain name of the encoder. The domain name should be set according to the requirements of the network administrator. Note that the StaticDomainName will only be used when DHCP is disabled! | |
| StaticDomainNameFeedback |
Reports the static domain name of the encoder.
The DMInputChange event will trigger with StaticDomainNameEventId. | |
| StaticDomainNameServer | Sets the static DNS (Domain Name Server) that the encoder will use. The string format is in dot decimal notation. Note that the StaticDomainNameServer will only be used when DHCP is disabled! | |
| StaticDomainNameServerFeedback |
Reports the static DNS server that is used by the encoder.
The DMInputChange event will trigger with StaticDomainNameServerEventId. | |
| StaticIpAddress | Sets the static IP address of the encoder. Note that these settings will only be used when DHCP is disabled! | |
| StaticIpAddressFeedback |
Report the static IP address of the encoder.
The IP address is given in dot decimal notation.
The DMInputChange event will trigger with StaticIpAddressEventId. | |
| StaticIpv6Address | Property to set the Static IPv6 Address. The maximum length is 200. | |
| StaticSubnetMask | Sets the static subnet mask of the encoder. Note that these settings will only be used when DHCP is disabled! | |
| StaticSubnetMaskFeedback |
Report the static subnet mask of the encoder.
The subnet mask is given in dot decimal notation.
The DMInputChange event will trigger with StaticSubnetMaskEventId. | |
| StreamInControl | Property to get the Stream In control. | |
| StreamingInputPort | Property to get the Streaming Input Port | |
| TimesetMethod | Property to set the Timeset Method. | |
| TimesetMethodFeedback |
Property to report the current Timeset Method.
The DMInputChange event will trigger with TimesetMethodEventId. | |
| TimeZone | Property to set the current Time Zone. | |
| TimeZoneFeedback |
Property to report the current Time Zone.
The DMInputChange event will trigger with TimeZoneEventId. | |
| Type | Get the type of stream this object represents. | |
| USBRoutedTo |
Selects the input or output where the corresponding USB source (connected to an input slot of the switcher) will be routed.
The input has no effect when USB routing is disabled ("USBEnter" = 'false'), or when USB breakaway is disabled ("EnableUSBBreakaway" = 'false').
Valid values are as follows:
null = Break connection, valid DMInput or DMOutput object will assign that object.
For a DMPS3-4K-200-C and DMPS3-4K-250-C, Input USB route is not supported. For a DMPS3-4K-300-C USB can be routed to SwitcherOutputs[3] (eDmps34K300COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K300COutputs.Dm2). For a DMPS3-4K-350-C, USB can be routed to SwitcherOutputs[3] (eDmps34K350COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K350COutputs.Dm2). (Inherited from DMInput) | |
| USBRoutedToFeedback |
Returns the input or output object where the corresponding USB source (connected to an input slot of the switcher) will be routed.
a null return will indicate no assigned connection
(Inherited from DMInput) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DMInputOutputBase) | |
| VideoDetectedFeedback |
Indicates whether video sync levels are detected at the input.
The output remains 'true' for as long as sync is detected.
'true' = Sync detected; 'false' = Sync not detected
(Inherited from DMInput) |
| Name | Description | |
|---|---|---|
| DisableDhcp | Disables DHCP (dynamic IP addressing) of the input. | |
| EnableDhcp | Enables DHCP (dynamic IP addressing) on the encoder of the input. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| ToString |
String representation of this DM card.
(Overrides DMInputOutputBaseToString) |