Click or drag to resize

Dmps3AirMediaInput Properties

The CardDmps3AirMediaInput type exposes the following members.

Properties
 NameDescription
Public propertyCode exampleAudioVideoSource Select the Audio and Video Source for CardDmps3AirMediaInput.
Example
To allow autoswitching between AirMedia and H.264: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = Auto
Example
To switch to AirMedia: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = AirMedia
Example
To switch to H.264: ((Card.Dmps3AirMediaInput)SwitcherInputs[(uint) eDmps34K350CInputs.AirMediaH264]).AudioVideoSource = H264
Public propertyAudioVideoSourceFeedback Reports the active audio and video source.

The DMInputChange event will trigger with AudioVideoSourceEventId.

Public propertyBaseDevice The base switcher device this input/output belongs to.
(Inherited from DMInputOutputBase)
Public propertyCard Access to the plugged in card
(Inherited from DMInputOutputBase)
Public propertyCardInputOutputType This will dictate the type of card in the switcher for DMPS systems. See SwitcherInputs and SwitcherOutputs for more details.
(Inherited from DMInputOutputBase)
Public propertyContentLanLinkStatusFeedback Indicates if an Ethernet link is detected at the content LAN input. 'true = Ethernet link detected; 'false = Ethernet link not detected.

The DMInputChange event will trigger with ContentLanLinkStatusEventId.

Public propertyContentLanMode Sets the Content LAN Mode. (Sets which interface to use for streaming)
Public propertyContentLanModeFeedback Reports the current content LAN mode.

The DMInputChange event will trigger with ContentLanModeEventId.

Public propertyCurrentDefaultRouterFeedback Reports the default router address of the encoder. The default router address is given in dot decimal notation.

The DMInputChange event will trigger with CurrentDefaultRouterEventId.

Public propertyCurrentDomainNameFeedback Reports the current domain name of the encoder.

The DMInputChange event will trigger with CurrentDomainNameEventId.

Public propertyCurrentDomainNameServerFeedback Reports the current DNS server that is used by the encoder.

The DMInputChange event will trigger with DomainNameServerEventId.

Public propertyCurrentIpAddressFeedback Reports the current IP address of the encoder. The IP address is given in dot decimal notation.

The DMInputChange event will trigger with CurrentIpAddressEventId.

Public propertyCurrentSubnetMaskFeedback Reports the current subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The DMInputChange event will trigger with CurrentSubnetMaskEventId.

Public propertyDisableDhcpFeedback Indicates that DHCP (dynamic IP addressing) is disabled. 'true = DHCP Disabled; 'false' = DHCP Enabled

The DMInputChange event will trigger with DisableDhcpEventId.

Public propertyDisplayControl Property to get the DMPS3 AirMedia Display Control AirMediaGeneralDisplay.
Public propertyEnableDhcpFeedback Indicates that DHCP (dynamic IP addressing) on the encoder is enabled. 'true = DHCP Enabled; 'false' = DHCP Disabled

The DMInputChange event will trigger with EnableDhcpEventId.

Public propertyEndpoint Route endpoint
(Inherited from DMInputOutputBase)
Public propertyEndpointNameFeedback

The DMInputChange event will trigger with EndpointNameEventId.

Text string that identifies the Endpoint name.
(Inherited from DMInputOutputBase)
Public propertyEndpointOnlineFeedback

On an input the DMInputChange event will trigger with EndpointOnlineEventId

On an output the DMOutputChange event will trigger with EndpointOnlineEventId

Indicates that the Endpoint is connected and detected at the input or output. The output remains 'true' for as long as the Endpoint is detected. When the endpoint is no longer present, the value changes to false.
(Inherited from DMInputOutputBase)
Public propertyHDBaseTDevice Get the current HDBaseTBase attached to this DM Input/Output
(Inherited from DMInputOutputBase)
Public propertyHostName Sets the hostname of the encoder. The hostname can consist of up to 63 characters with no spaces. Valid characters are 0 – 9, A – Z and hyphen. The hostname cannot begin with a hyphen or number.
Public propertyHostNameFeedback Reports the hostname of the encoder.

The DMInputChange event will trigger with HostNameEventId.

Public propertyInputOutput The input output device that owns a port.
(Inherited from DMInputOutputBase)
Public propertyIoType The type of input or output
(Inherited from DMInputOutputBase)
Public propertyMediaConfiguration Property to get the DMPS3 AirMedia Top Level Media Configuration and Control AirMediaGeneralConfiguration.
Public propertyName Specifies the name of the corresponding input stream. The name is displayed on the LCD front panel and in DM Tools. The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space). Note that on some switcher inputs (such as the DMPS3) the Name may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput)
Public propertyNameFeedback Reports the name of the corresponding input stream. Note that on some switcher inputs (such as the DMPS3) the NameFeedback may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput)
Public propertyNumber The Number of stream input or output
(Inherited from DMInputOutputBase)
Protected propertyOnDm64 Property to indicate that this I/O is on a DM64 based switcher.
(Inherited from DMInputOutputBase)
Protected propertyOnDmps Property to indicate that this Input/Output is on a DMPS.
(Inherited from DMInputOutputBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)
(Inherited from DMInputOutputBase)
Public propertyParent The parent that a given object was added to.
(Inherited from DMInputOutputBase)
Public propertyPoDMOverpowerFeedback Reports the overpower condition of the corresponding DM input or output.

The property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C switchers. On other systems this property returns a null signal.

On a supported output card the DMOutputChange event will trigger with PoDMOverpowerFeedbackEventId.

On a supported input card the DMInputChange event will trigger with PoDMOverpowerFeedbackEventId.


(Inherited from DMInputOutputBase)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the DM switcher. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed
(Inherited from DMInputOutputBase)
Public propertyStaticDefaultRouter Sets the static default router address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticDefaultRouterFeedback Report the static default router address of the encoder. The default router address is given in dot decimal notation.

The DMInputChange event will trigger with StaticDefaultRouterEventId.

Public propertyStaticDomainName Sets the static domain name of the encoder. The domain name should be set according to the requirements of the network administrator. Note that the StaticDomainName will only be used when DHCP is disabled!
Public propertyStaticDomainNameFeedback Reports the static domain name of the encoder.

The DMInputChange event will trigger with StaticDomainNameEventId.

Public propertyStaticDomainNameServer Sets the static DNS (Domain Name Server) that the encoder will use. The string format is in dot decimal notation. Note that the StaticDomainNameServer will only be used when DHCP is disabled!
Public propertyStaticDomainNameServerFeedback Reports the static DNS server that is used by the encoder.

The DMInputChange event will trigger with StaticDomainNameServerEventId.

Public propertyStaticIpAddress Sets the static IP address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticIpAddressFeedback Report the static IP address of the encoder. The IP address is given in dot decimal notation.

The DMInputChange event will trigger with StaticIpAddressEventId.

Public propertyStaticIpv6Address Property to set the Static IPv6 Address. The maximum length is 200.
Public propertyStaticSubnetMask Sets the static subnet mask of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticSubnetMaskFeedback Report the static subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The DMInputChange event will trigger with StaticSubnetMaskEventId.

Public propertyStreamInControl Property to get the Stream In control.
Public propertyStreamingInputPort Property to get the Streaming Input Port
Public propertyTimesetMethod Property to set the Timeset Method.
Public propertyTimesetMethodFeedback Property to report the current Timeset Method.

The DMInputChange event will trigger with TimesetMethodEventId.

Public propertyTimeZone Property to set the current Time Zone.
Public propertyTimeZoneFeedback Property to report the current Time Zone.

The DMInputChange event will trigger with TimeZoneEventId.

Public propertyType Get the type of stream this object represents.
Public propertyCode exampleUSBRoutedTo Selects the input or output where the corresponding USB source (connected to an input slot of the switcher) will be routed. The input has no effect when USB routing is disabled ("USBEnter" = 'false'), or when USB breakaway is disabled ("EnableUSBBreakaway" = 'false'). Valid values are as follows: null = Break connection, valid DMInput or DMOutput object will assign that object.

For a DMPS3-4K-200-C and DMPS3-4K-250-C, Input USB route is not supported.

For a DMPS3-4K-300-C USB can be routed to SwitcherOutputs[3] (eDmps34K300COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K300COutputs.Dm2).

For a DMPS3-4K-350-C, USB can be routed to SwitcherOutputs[3] (eDmps34K350COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K350COutputs.Dm2).


(Inherited from DMInput)
Public propertyUSBRoutedToFeedback Returns the input or output object where the corresponding USB source (connected to an input slot of the switcher) will be routed. a null return will indicate no assigned connection
(Inherited from DMInput)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from DMInputOutputBase)
Public propertyVideoDetectedFeedback Indicates whether video sync levels are detected at the input. The output remains 'true' for as long as sync is detected. 'true' = Sync detected; 'false' = Sync not detected
(Inherited from DMInput)
Top
See Also