Click or drag to resize

DmcStroAV Class

The DMC-STRO is a streaming output card with video and audio mixing capabilities which can generate streams of up to 25 megabits. To be matched precisely to your environment the card has been designed to allow flexibility in network design; the stream can either be routed out via the Content LAN port, or the DM's internal Ethernet. In automatic mode (default), the DMC-STRO will stream out via the Content LAN port if link is detected, otherwise it will use the internal DM Ethernet.

This class will trigger DMOutputChange and AttributeChange events.

Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.DM.Cards
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public sealed class DmcStroAV : CardDevice, 
	IDmCardCommonAudioAndVideoSigs

The DmcStroAV type exposes the following members.

Properties
 NameDescription
Public propertyAudioMuteFeedback Indicates that the output audio is muted.

The DMOutputChange event will trigger with AudioMuteEventId.

Public propertyAudioUnmuteFeedback Indicates that the output audio is not muted.

The DMOutputChange event will trigger with AudioUnmuteEventId.

Public propertyBass Sets the bass level for the corresponding audio input. Valid values range from -150 (-15dB) to +150 (+15dB), where 1 = 0.1dB.
Public propertyBassFeedback Reports the bass level for the corresponding audio input.

The DMOutputChange event will trigger with BassEventId.

Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyControl The object of common stream control class DmcStroControl for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle.

The DMOutputChange event will trigger with DMOutputEventIds.

Public propertyDelay Sets the delay level. Valid values range from 0 (0ms) to 400 (40ms), where 1 = 0.1ms.
Public propertyDelayFeedback Returns the delay level.

The DMOutputChange event will trigger with DelayEventId.

Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisablePipSwapFeedback Indicates the background and the PIP (Picture in Picture) video windows have been returned to normal order.

The DMOutputChange event will trigger with DisablePipSwapEventId.

Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnablePipSwapFeedback Indicates that the background and the PIP (Picture in Picture) video windows have been swapped.

The DMOutputChange event will trigger with EnablePipSwapEventId.

Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)

The DMOutputChange event will trigger with OnlineFeedbackEventId.

Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPipBorderThickness Sets the PIP border thickness (as a percentage of the image width), specifying how far the primary edges are to the edge of the screen. Valid values range from 0 to 6554, which corresponds to a max of 10% Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage
Public propertyPipBorderThicknessFeedback Reports the current PIP border thickness.

The DMOutputChange event will trigger with PipBorderThicknessEventId.

Public propertyPipCenterLeftFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipCenterLeftEventId.

Public propertyPipCenterRightFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipCenterRightEventId.

Public propertyPipFullframeFeedback Indicates that Full-frame view is active. The output remains high for as long as the full-frame view is active.

The DMOutputChange event will trigger with PipFullframeEventId.

Public propertyPipLowerLeftFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipLowerLeftEventId.

Public propertyPipLowerRightFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipLowerRightEventId.

Public propertyPipSideBySideFeedback Indicates that Side-by-Side view is active. The output remains high for as long as the Side-by-Side view is active.

The DMOutputChange event will trigger with PipSideBySideEventId.

Public propertyPipSize Sets the size of the PIP window as a percentage of the screen resolution. This is also used to adjust the size of the side-by-side windows, allowing one window to be larger than the other. Valid values range from 3277 to 62259 (5% to 95%) Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage
Public propertyPipSizeFeedback Reports the size of the PIP window.

The DMOutputChange event will trigger with PipSizeEventId.

Public propertyPipUpperLeftFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipUpperLeftEventId.

Public propertyPipUpperRightFeedback Indicates that the corresponding PIP view is active.

The DMOutputChange event will trigger with PipUpperRightEventId.

Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the Switch. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed

The DMOutputChange event will trigger with PresentFeedbackEventId.

Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySources Collection of StreamingSources present on this DmcStroAV.

See StreamingSources to determine which events will trigger for feedbacks.

Public propertySwitcher Switcher this card is attached to.
(Inherited from CardDevice)
Public propertySwitcherInputOutput Reference back to this cards corresponding switcher input or output.
(Inherited from CardDevice)
Public propertyTreble Sets the treble level for the corresponding audio input. Valid values range from -150 (-15dB) to +150 (+15dB), where 1 = 0.1dB.
Public propertyTrebleFeedback Reports the treble level for the corresponding audio input.

The DMOutputChange event will trigger with TrebleEventId.

Public propertyType The type of card created
(Inherited from CardDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyVolume Sets the volume level as a percentage. Valid values range from 0 to 100%
Public propertyVolumeFeedback Reports the volume level.

The DMOutputChange event will trigger with VolumeEventId.

Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
Methods
 NameDescription
Public methodAudioMute Mutes the output audio of the input.
Public methodAudioUnmute Unmutes the output audio of the input.
Public methodDisablePiPSwap Returns the swapped background and PIP (Picture in Picture) video windows to normal order.
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Override of the dispose method to remove the card from the switcher. This is only valid for Input cards and Output card modules (e.g. DmcoXX)
(Inherited from CardDevice)
Public methodEnablePipSwap Enables swapping of the background and the PIP (Picture in Picture) video windows on the rising edge of the input. For side-by-side the two streams will be switched. For full-frames, the image from source 2 will be displayed instead of source 1. This allows for very fast switching. This switches the video windows so that the source in the PIP window becomes the background and vice versa. The audio will be heard from whichever source is in the background (large) window.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodPipCenterLeft Recalls the center left predefined PIP view of the input.
Public methodPipCenterRight Recalls the center right predefined PIP view of the input.
Public methodPipFullframe Recalls the predefined full frame view, i.e. displays the stream from the PIP window in a full frame window view of the input.
Public methodPipLowerLeft Recalls the lower left predefined PIP view of the input.
Public methodPipLowerRight Recalls the lower right predefined PIP view of the input.
Public methodPipSideBySide The input recalls the predefined full frame view, i.e. creates two equal sized windows displayed side by side, one with the video from the PIP window, and the other one with video from the background.
Public methodPipUpperLeft Recalls the corresponding predefined PIP view (upper left, center left, lower left, upper right, center right or lower right) of the input.
Public methodPipUpperRight Recalls the upper right predefined PIP view of the input.
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString String representation of this DM card.
(Inherited from CardDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also