Click or drag to resize

DmcCoHdB Class

The DMC-CO-HD is an output card compatible with the output card slots of a DMCO enclosure. The DMC-CO-HD provides two DigitalMedia (DM) output connectors labeled DM OUT 1 and DM OUT 2. Each DM output transmits video, audio, HDCP, EDID and USB data to a DM receiver. The unit also provides two PoE (Power over Ethernet) connectors labeled POE IN 1 and POE IN 2, that can supply power to the connected receiver. This is accomplished by plugging a PoE injector into the PoE port to feed power down the DM cable to the receiver. The DMC-CO-HD also provides one local HDMI output, configured in parallel with DM OUT 1. The HDMI output carries the same audio and video signals as the corresponding DM output, for feedthrough to a display device. In this case, DM OUT 1 is DmcCoHdA and DM OUT 2 is DmcCoHdB.

This class will trigger DMOutputChange and DeviceInformationChange events.

Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.DM.Cards
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public sealed class DmcCoHdB : DmcCoBaseB

The DmcCoHdB type exposes the following members.

Properties
 NameDescription
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyDmOutput Access to the DMOutStream

This property will trigger DeviceInformationChange with ConnectedDeviceEventIds for ConnectedDeviceInformation object.

This property will trigger DMOutputChange with DMOutputEventIds for AdvDmOutputCardDmPort object.


(Inherited from DmcCoBaseB)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)

The DMOutputChange event will trigger with OnlineFeedbackEventId.


(Inherited from DmcCoBaseB)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the Switch. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed

The DMOutputChange event will trigger with PresentFeedbackEventId.


(Inherited from DmcCoBaseB)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyStream3DStatusFeedback Indicates the 3D status of the video source.

The DMOutputChange event will trigger with Stream3DStatusEventId.


(Inherited from DmcCoBaseB)
Public propertySwitcher Switcher this card is attached to.
(Inherited from CardDevice)
Public propertySwitcherInputOutput Reference back to this cards corresponding switcher input or output.
(Inherited from CardDevice)
Public propertyType The type of card created
(Inherited from CardDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
Methods
 NameDescription
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Override of the dispose method to remove the card from the switcher. This is only valid for Input cards and Output card modules (e.g. DmcoXX)
(Inherited from CardDevice)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString String representation of this DM card.
(Inherited from CardDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also