CardDmps |
public class Dmps3AirMediaNoStreamingInput : DMInput, IDmCardStreamBase
The CardDmps3AirMediaNoStreamingInput type exposes the following members.
| Name | Description | |
|---|---|---|
| BaseDevice |
The base switcher device this input/output belongs to.
(Inherited from DMInputOutputBase) | |
| Card |
Access to the plugged in card
(Inherited from DMInputOutputBase) | |
| CardInputOutputType |
This will dictate the type of card in the switcher for DMPS systems.
See SwitcherInputs and SwitcherOutputs for more details.
(Inherited from DMInputOutputBase) | |
| ConnectedDeviceFeedback | Indicates if a Crestron Connected projector is connected. Device's IP must be defined in Crestron Connected setup and the connection must be successful. | |
| DisplayControl | Property to get the DMPS3 AirMedia Display Control AirMediaGeneralDisplay. | |
| Endpoint |
Route endpoint
(Inherited from DMInputOutputBase) | |
| EndpointNameFeedback | The DMInputChange event will trigger with EndpointNameEventId. Text string that identifies the Endpoint name.(Inherited from DMInputOutputBase) | |
| EndpointOnlineFeedback | On an input the DMInputChange event will trigger with EndpointOnlineEventId On an output the DMOutputChange event will trigger with EndpointOnlineEventId Indicates that the Endpoint is connected and detected at the input or output. The output remains 'true' for as long as the Endpoint is detected. When the endpoint is no longer present, the value changes to false.(Inherited from DMInputOutputBase) | |
| ErrorFeedback |
Indicates the current error code value. If the value of this field is not 0 see ErrorTextFeedback for more details.
The DMInputChange event will trigger with the AirMediaErrorFeedbackEventId. | |
| ErrorTextFeedback | Displays error messages (up to 200 characters) from the device. For example: 'No error'. | |
| HDBaseTDevice |
Get the current HDBaseTBase attached to this DM Input/Output
(Inherited from DMInputOutputBase) | |
| HostnameFeedback | Reports the host name of the device. | |
| InputOutput |
The input output device that owns a port.
(Inherited from DMInputOutputBase) | |
| IoType |
The type of input or output
(Inherited from DMInputOutputBase) | |
| IPAddressFeedback | Returns the IP address of the device. | |
| LoginCode | Sets the login code for the AirMedia. | |
| LoginCodeFeedback | Returns the login code. | |
| LoginCodeModeFeedback | Reports the current login code (access code) mode. | |
| LoginCodeTextFeedback | Reports the login code in text form. | |
| Name |
Specifies the name of the corresponding input stream. The name is displayed on the LCD front panel and in DM Tools.
The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space).
Note that on some switcher inputs (such as the DMPS3) the Name may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput) | |
| NameFeedback |
Reports the name of the corresponding input stream.
Note that on some switcher inputs (such as the DMPS3) the NameFeedback may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput) | |
| Number |
The Number of stream input or output
(Inherited from DMInputOutputBase) | |
| NumberOfUsersConnectedFeedback | Indicates the number of users currently connected. | |
| OnDm64 |
Property to indicate that this I/O is on a DM64 based switcher.
(Inherited from DMInputOutputBase) | |
| OnDmps |
Property to indicate that this Input/Output is on a DMPS.
(Inherited from DMInputOutputBase) | |
| OnlineFeedback |
Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network.
The output will remain 'true' for as long as the card is online.
'true' = Card online (running); 'false' = Card offline (not running)
(Inherited from DMInputOutputBase) | |
| OutputResolutionFeedback | Indicates the output resolution of AirMedia. | |
| OutputTimeout | Sets the amount of time before the device turns off its output. | |
| OutputTimeoutFeedback | Reports the amount of time before the device turns off its output. | |
| Parent |
The parent that a given object was added to.
(Inherited from DMInputOutputBase) | |
| PoDMOverpowerFeedback |
Reports the overpower condition of the corresponding DM input or output.
The property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C switchers. On other systems this property returns a null signal. On a supported output card the DMOutputChange event will trigger with PoDMOverpowerFeedbackEventId. On a supported input card the DMInputChange event will trigger with PoDMOverpowerFeedbackEventId. (Inherited from DMInputOutputBase) | |
| PresentFeedback |
Indicates whether the card is physically plugged into the card slot on the DM switcher.
The output will remain 'true' for as long as the card is detected.
'true' = Card present; 'false' = Card not installed
(Inherited from DMInputOutputBase) | |
| RebootRequestedFeedback | Indicates there are setting changes that require a reboot for the AirMedia device. | |
| SerialNumberFeedback | Reports the serial number. | |
| SourceSelection |
Selects the source on the Crestron
connected display.
Valid values range from 0d to 10d depending on the source. For example, if the source has only 4 inputs, valid values will range from 0d to 4d. | |
| SourceSelectionFeedback |
Indicates the source of the Crestron connected display.
Valid values range from 0d to 10d depending on the source. For example, if the source has only 4 inputs, valid values will range from 0d to 4d. | |
| StatusFeedback |
Reports the status of the AirMedia. Value 0 means 'Idle', Value 1 means 'In session'.
The DMInputChange event will trigger with the AirMediaStatusFeedbackEventId. | |
| StatusTextFeedback | Returns the status of the AirMedia device in text form. | |
| Type | Get the type of stream this object represents. | |
| USBRoutedTo |
Selects the input or output where the corresponding USB source (connected to an input slot of the switcher) will be routed.
The input has no effect when USB routing is disabled ("USBEnter" = 'false'), or when USB breakaway is disabled ("EnableUSBBreakaway" = 'false').
Valid values are as follows:
null = Break connection, valid DMInput or DMOutput object will assign that object.
For a DMPS3-4K-200-C and DMPS3-4K-250-C, Input USB route is not supported. For a DMPS3-4K-300-C USB can be routed to SwitcherOutputs[3] (eDmps34K300COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K300COutputs.Dm2). For a DMPS3-4K-350-C, USB can be routed to SwitcherOutputs[3] (eDmps34K350COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K350COutputs.Dm2). (Inherited from DMInput) | |
| USBRoutedToFeedback |
Returns the input or output object where the corresponding USB source (connected to an input slot of the switcher) will be routed.
a null return will indicate no assigned connection
(Inherited from DMInput) | |
| UserDisplayControls | Property to get the collection of AirMediaUserDisplay signals. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DMInputOutputBase) | |
| VideoDetectedFeedback |
Indicates whether video sync levels are detected at the input.
The output remains 'true' for as long as sync is detected.
'true' = Sync detected; 'false' = Sync not detected
(Inherited from DMInput) |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LoginCodeMode | Configures the login code (access code) mode state for the AirMedia. | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| OutputResolution | Selects the video resolution for both HDMI and VGA on AirMedia. | |
| Reboot | Reboot the AirMedia | |
| ToString |
String representation of this DM card.
(Overrides DMInputOutputBaseToString) |