Click or drag to resize

Dmps3AirMediaNoStreamingInput Properties

The CardDmps3AirMediaNoStreamingInput type exposes the following members.

Properties
 NameDescription
Public propertyBaseDevice The base switcher device this input/output belongs to.
(Inherited from DMInputOutputBase)
Public propertyCard Access to the plugged in card
(Inherited from DMInputOutputBase)
Public propertyCardInputOutputType This will dictate the type of card in the switcher for DMPS systems. See SwitcherInputs and SwitcherOutputs for more details.
(Inherited from DMInputOutputBase)
Public propertyConnectedDeviceFeedback Indicates if a Crestron Connected projector is connected. Device's IP must be defined in Crestron Connected setup and the connection must be successful.
Public propertyDisplayControl Property to get the DMPS3 AirMedia Display Control AirMediaGeneralDisplay.
Public propertyEndpoint Route endpoint
(Inherited from DMInputOutputBase)
Public propertyEndpointNameFeedback

The DMInputChange event will trigger with EndpointNameEventId.

Text string that identifies the Endpoint name.
(Inherited from DMInputOutputBase)
Public propertyEndpointOnlineFeedback

On an input the DMInputChange event will trigger with EndpointOnlineEventId

On an output the DMOutputChange event will trigger with EndpointOnlineEventId

Indicates that the Endpoint is connected and detected at the input or output. The output remains 'true' for as long as the Endpoint is detected. When the endpoint is no longer present, the value changes to false.
(Inherited from DMInputOutputBase)
Public propertyErrorFeedback Indicates the current error code value. If the value of this field is not 0 see ErrorTextFeedback for more details.

The DMInputChange event will trigger with the AirMediaErrorFeedbackEventId.

Public propertyErrorTextFeedback Displays error messages (up to 200 characters) from the device. For example: 'No error'.
Public propertyHDBaseTDevice Get the current HDBaseTBase attached to this DM Input/Output
(Inherited from DMInputOutputBase)
Public propertyHostnameFeedback Reports the host name of the device.
Public propertyInputOutput The input output device that owns a port.
(Inherited from DMInputOutputBase)
Public propertyIoType The type of input or output
(Inherited from DMInputOutputBase)
Public propertyIPAddressFeedback Returns the IP address of the device.
Public propertyLoginCode Sets the login code for the AirMedia.
Public propertyLoginCodeFeedback Returns the login code.
Public propertyLoginCodeModeFeedback Reports the current login code (access code) mode.
Public propertyLoginCodeTextFeedback Reports the login code in text form.
Public propertyName Specifies the name of the corresponding input stream. The name is displayed on the LCD front panel and in DM Tools. The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space). Note that on some switcher inputs (such as the DMPS3) the Name may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput)
Public propertyNameFeedback Reports the name of the corresponding input stream. Note that on some switcher inputs (such as the DMPS3) the NameFeedback may be a CrestronControlSystem.NullStringInputSig.
(Inherited from DMInput)
Public propertyNumber The Number of stream input or output
(Inherited from DMInputOutputBase)
Public propertyNumberOfUsersConnectedFeedback Indicates the number of users currently connected.
Protected propertyOnDm64 Property to indicate that this I/O is on a DM64 based switcher.
(Inherited from DMInputOutputBase)
Protected propertyOnDmps Property to indicate that this Input/Output is on a DMPS.
(Inherited from DMInputOutputBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)
(Inherited from DMInputOutputBase)
Public propertyOutputResolutionFeedback Indicates the output resolution of AirMedia.
Public propertyOutputTimeout Sets the amount of time before the device turns off its output.
Public propertyOutputTimeoutFeedback Reports the amount of time before the device turns off its output.
Public propertyParent The parent that a given object was added to.
(Inherited from DMInputOutputBase)
Public propertyPoDMOverpowerFeedback Reports the overpower condition of the corresponding DM input or output.

The property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C switchers. On other systems this property returns a null signal.

On a supported output card the DMOutputChange event will trigger with PoDMOverpowerFeedbackEventId.

On a supported input card the DMInputChange event will trigger with PoDMOverpowerFeedbackEventId.


(Inherited from DMInputOutputBase)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the DM switcher. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed
(Inherited from DMInputOutputBase)
Public propertyRebootRequestedFeedback Indicates there are setting changes that require a reboot for the AirMedia device.
Public propertySerialNumberFeedback Reports the serial number.
Public propertySourceSelection Selects the source on the Crestron connected display.

Valid values range from 0d to 10d depending on the source. For example, if the source has only 4 inputs, valid values will range from 0d to 4d.

Public propertySourceSelectionFeedback Indicates the source of the Crestron connected display.

Valid values range from 0d to 10d depending on the source. For example, if the source has only 4 inputs, valid values will range from 0d to 4d.

Public propertyStatusFeedback Reports the status of the AirMedia. Value 0 means 'Idle', Value 1 means 'In session'.

The DMInputChange event will trigger with the AirMediaStatusFeedbackEventId.

Public propertyStatusTextFeedback Returns the status of the AirMedia device in text form.
Public propertyType Get the type of stream this object represents.
Public propertyCode exampleUSBRoutedTo Selects the input or output where the corresponding USB source (connected to an input slot of the switcher) will be routed. The input has no effect when USB routing is disabled ("USBEnter" = 'false'), or when USB breakaway is disabled ("EnableUSBBreakaway" = 'false'). Valid values are as follows: null = Break connection, valid DMInput or DMOutput object will assign that object.

For a DMPS3-4K-200-C and DMPS3-4K-250-C, Input USB route is not supported.

For a DMPS3-4K-300-C USB can be routed to SwitcherOutputs[3] (eDmps34K300COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K300COutputs.Dm2).

For a DMPS3-4K-350-C, USB can be routed to SwitcherOutputs[3] (eDmps34K350COutputs.Dm1)and SwitcherOutputs[4] (eDmps34K350COutputs.Dm2).


(Inherited from DMInput)
Public propertyUSBRoutedToFeedback Returns the input or output object where the corresponding USB source (connected to an input slot of the switcher) will be routed. a null return will indicate no assigned connection
(Inherited from DMInput)
Public propertyUserDisplayControls Property to get the collection of AirMediaUserDisplay signals.
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from DMInputOutputBase)
Public propertyVideoDetectedFeedback Indicates whether video sync levels are detected at the input. The output remains 'true' for as long as sync is detected. 'true' = Sync detected; 'false' = Sync not detected
(Inherited from DMInput)
Top
See Also