Click or drag to resize

HzThstat Class

HZ-THSTAT device class.
Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.Thermostats
Assembly: Crestron.SimplSharpPro.Thermostats (in Crestron.SimplSharpPro.Thermostats.dll) Version: 2.21.121
Syntax
C#
public sealed class HzThstat : DinThstat

The HzThstat type exposes the following members.

Constructors
 NameDescription
Public methodHzThstat Constructor to create a new HzThstat object.
Top
Properties
 NameDescription
Public propertyAnyFcuSysTypeFeedback Property to inidicate the system type is any of the FCU types True: System is FCU type, False: System is not FCU type

The BaseEvent event will trigger with AnyFcuSystemTypeEventId object.

Public propertyAnyFloorHeatSystemTypeFeedback Property to indicate if any system type using floor radiant heat is defined (can be both floor warming and space heating via floor radiant). true = A system type using floor radiant heat is defined; false = No system type using floor radiant heat is defined

The BaseEvent event will trigger with AnyFloorHeatSystemTypeFeedbackEventId.


(Inherited from DinThstat)
Public propertyAnyHeatpumpSystemTypeFeedback Property to indicate if any heat pump control logic is used. true = A heat pump control logic is used; false = No heat pump control logic is used

The BaseEvent event will trigger with AnyHeatpumpSystemTypeFeedbackEventId.


(Inherited from DinThstat)
Public propertyAnySpaceSystemTypeFeedback Property to indicate that if any space system type defined. true = A space system is defined; false = No space system is defined

The BaseEvent event will trigger with AnySpaceSystemTypeFeedbackEventId.


(Inherited from DinThstat)
Public propertyAuto1ptSetpoint Sets the auto1pt setpoint, where 1d = 0.1 degrees. The value is based on the current temperature scale (Fahrenheit or Celsius). The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat)
Public propertyAuto1ptSetpointFeedback Reports the active auto1pt setpoint value. This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.

The BaseEvent event will trigger with Auto1ptSetpointFeedbackEventId.


(Inherited from Thermostat)
Public propertyAutoDeadbandFeedback Reports the auto deadband value selected via the "db" option in the Setup menu, where 1d = 0.1 degrees. In dual-setpoint auto mode, this value is the minimum separation between heat and cool setpoints, which prevents the system from toggling back and forth due to overshoot. In single-setpoint auto mode, this value sets the hysteresis used when changing from heat to cool. For example, if the setpoint is 70°F with auto deadband of 2 degrees, the temperature would have to rise to 72°F before running cool, and 68°F before running heat. HZ-THSTAT reports auto mode deadband parameter in 10ths of current unit: Fahrenheit : 20, 30, 40, 50, 60 (F). Celsius : 10, 20, 30 (C).

The BaseEvent event will trigger with AutoDeadbandFeedbackEventId.


(Inherited from Thermostat)
Public propertyAuxHeatCallFeedbacks Returns a collection of components that indicate when the system is calling for auxiliary heat.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from DinThstat)
Public propertyAuxHeatCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Aux heat call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyAuxInputActiveFeedback Indicates that the general-purpose opto-isolated input has voltage applied. This property is not supported by HZ-THSTAT.

The BaseEvent event will trigger with AuxInputActiveFeedbackEventId object.


(Inherited from DinThstat)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCoolCallFeedbacks Returns a collection of components that indicate when the system is calling for cooling.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from Thermostat)
Public propertyCoolCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Cool call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyCoolSetpoint Sets the cool setpoint, where 1d = 0.1 degrees. The value is based on the current temperature scale (Fahrenheit or Celsius). The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat)
Public propertyCoolSetpointFeedback Reports the active cool setpoint value. This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.

The BaseEvent event will trigger with CoolSetpointFeedbackEventId.


(Inherited from Thermostat)
Public propertyDehumidityCallFeedbacks Returns a collection of components that indicate when the system is making a dehumidity call.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from DinThstat)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDinUnitUiLockout Property to lock out operation of the UI on the DIN-THSTAT unit.
(Inherited from DinThstat)
Public propertyDisplayMessage Property to set a string for displaying brief messages on remote UI.
(Inherited from DinThstat)
Public propertyDisplayUnit Property to accept an enumeration for defining temperature unit format.
(Inherited from DinThstat)
Public propertyDisplayUnitFeedback Property to report the enumeration for defining temperature unit format.

The BaseEvent event will trigger with DisplayUnitFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyDualSetpointsAutoModeFeedback Property to indicate if auto mode uses separate heat and cool SP’s (instead of the single SP format).

The BaseEvent event will trigger with DualSetpointsAutoModeFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyExtenderUiStatusReservedSigs Property to access the UI status functionality of the HZ-Thstat.

This property will trigger DeviceExtenderSigChange event.

Public propertyFanCallFeedback Indicates that the fan is running.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.


(Inherited from DinThstat)
Public propertyFanCallHighFeedback Property to indicate if fan is running on the high setting. True: Fan is running on the high setting, False : Fan is not running on the high setting.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.

Public propertyFanCallLowFeedback Property to indicate if fan is running on the low setting. True: Fan is running on the low setting, False : Fan is not running on the low setting.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.

Public propertyFanCallMediumFeedback Property to indicate if fan is running on the medium setting. True: Fan is running on the medium setting, False : Fand is not running on the medium setting.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.

Public propertyFanCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Fan call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyFanCirculateLowCallFeedback Property to indicate if fan is running for periodic circulation purpose(low duty cycle). True: Active (low duty cycle), False : Not active.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.

Public propertyFanCirculateMediumCallFeedback Property to indicate if fan is running for periodic circulation purpose(medium duty cycle). True: Active (Medium duty cycle), False : Not active.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.

Public propertyFanCirculationCallFeedback Indicates that the fan is circulating.

The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState.


(Inherited from DinThstat)
Public propertyFanMode Sets the fan mode.
(Inherited from DinThstat)
Public propertyFanModeFeedback Reports the commanded/current fan mode.

The BaseEvent event will trigger with FanModeFeedbackEventId.


(Inherited from DinThstat)
Public propertyFanRunTimeHoursFeedback Property to indicate cumulative fan runtime in hours since last reset. This value is used for fitler interval timing. (value gets reset via ResetFanRunTime input)

The BaseEvent event will trigger with FanRunTimeHoursFeedbackEventId.

Public propertyFanSpeed Sets the fan speed.
Public propertyFanSpeedFeedback Reports the commanded/current fan speed.

The BaseEvent event will trigger with FanSpeedFeedbackEventId.

Public propertyFcuAutoChangeoverCoolDetectedFeedback Property to indicate when a 2-pipe heat/cool fan coil unit system type detects the supply pipe is providing cooling True: The fan coil unit system type detectss the supply pipe has switched from providing heating to cooling, False : The fan coil unit system type no longer detects the supply pipe switching from heating to cooling.

The BaseEvent event will trigger with FcuAutoChangeoverCoolDetectedEventId object.

Public propertyFcuAutoChangeoverHeatDetectedFeedback Property to indicate when a 2-pipe heat/cool fan coil unit system type detects the supply pipe is providing heating True: The fan coil unit system type detectss the supply pipe has switched from providing cooling to heating, False : The fan coil unit system type no longer detects the supply pipe switching from cooling to heating.

The BaseEvent event will trigger with FcuAutoChangeoverHeatDetectedEventId object.

Public propertyFcuAutoChangeoverTemperatureFeedback Property to report the the temperature of the sensor defined as the FCU 2-pipe heat/cool supply pipe temperature sensor. This sensor is used to detect what system mode the building supply water is operating in. Value is reported in 10ths of the current temperature unit

The BaseEvent event will trigger with FcuAutoChangeoverTemperatureEventId object.

Public propertyFcuAvailableFanSpeedsMaskFeedback Property to inidicate the available fan speeds for FCU system types

The BaseEvent event will trigger with FcuAvailableFanSpeedsMaskEventId object.

Public propertyFcuFanSpeedStagingEnabledFeedback Property to indicate the status of automatic staging of fan speeds for FCU systems Note this may report high even when system type is not an FCU type. True: Automatic staging of fan speeds is enabled, False: automatic staging of fan speeds is disabled

The BaseEvent event will trigger with FcuFanSpeedStagingEnabledEventId object.

Public propertyFcuSysIs2pipeFeedback Property to inidicate the system type is a 2-pipe FCY system. True: System is 2-pipe FCU, False: System is 4-pipe FCU or non-FCU

The BaseEvent event will trigger with FcuSystemIs2pipeEventId object.

Public propertyFloorTemperatureFeedback Reports the current floor temperature in tenths of current unit. This is like the “regulation” values from other slots, which can be an average of more than one floor sensor.  However, it is reported for any floor radiant system configuration, even if the type does not control the floor temperature.

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from DinThstat)
Public propertyFloorWarmingCallFeedbacks Returns a collection of components that indicate when the system is making a floor warming call.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from DinThstat)
Public propertyFloorWarmingCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Floor warming call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyFloorWarmingMode Property to set the floor warming mode.
(Inherited from DinThstat)
Public propertyFloorWarmingModeFeedback Property to report the floor warming system mode.

The BaseEvent event will trigger with FloorWarmingModeFeedbackEventId.


(Inherited from DinThstat)
Public propertyFloorWarmingSetpoint Property to set the floor warming setpoint value in tenths of the current unit.
(Inherited from DinThstat)
Public propertyFloorWarmingSetpointFeedback Reports the current floor warming setpoint value in tenths of the current unit.

The BaseEvent event will trigger with FloorWarmingSetpointFeedbackEventId.


(Inherited from DinThstat)
Public propertyFloorWarmingSystemTypeFeedback Property to indicate if a floor warming system type is defined (independent signal; floor warming can be controlled separately from space). true = A floor warming system type is defined; false = No floor warming system type is defined

The BaseEvent event will trigger with FloorWarmingSystemTypeFeedbackEventId.


(Inherited from DinThstat)
Public propertyFullSetupData Property to store full setup configuration for advanced debug or remote configuration.
(Inherited from DinThstat)
Public propertyFullSetupDataFeedback Property to read full setup configuration for advanced debug or remote configuration.

FullSetupDataFeedback will trigger the event FullSetupDataFeedbackEventId.


(Inherited from DinThstat)
Public propertyHeatCallFeedbacks Returns a collection of components that indicate when the system is calling for heat.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from Thermostat)
Public propertyHeatCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Heat call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyHeatSetpoint Sets the heat setpoint, where 1d = 0.1 degrees. The value is based on the current temperature scale (Fahrenheit or Celsius). The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat)
Public propertyHeatSetpointFeedback Reports the active heat setpoint value. This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.

The BaseEvent event will trigger with HeatSetpointFeedbackEventId.


(Inherited from Thermostat)
Public propertyHumidistatCallShortCycleTimeoutHoldOffFeedbackObsolete.
Property to indicate Humidistat call held off by short cycle timeout. True: Indicates system call is being held off by short-cycle protection, False : Not Held.
Public propertyHumidistatEnabledFeedback Property to indicate if the humidistat operation is available. This is the humidistat feature enable, not the on/off mode control signal.

The BaseEvent event will trigger with HumidifierEnableFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyHumidistatMode Sets the Humidistat mode.
(Inherited from DinThstat)
Public propertyHumidistatModeFeedback Reports the current Humidistat mode.

The BaseEvent event will trigger with HumidifierModeFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyHumidityCallFeedbacks Returns a collection of components that indicate when the system is making a humidity call.

The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object.


(Inherited from DinThstat)
Public propertyHumiditySetpoint Reports the current Humidistat setpoint value in 1% RH ticks. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from DinThstat)
Public propertyHumiditySetpointFeedback Reports the current Humidistat setpoint value in 1% RH ticks. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The BaseEvent event will trigger with HumiditySetpointFeedbackEventId.


(Inherited from DinThstat)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIndoorHumidity Property to provide indoor humidity in 1%RH ticks. For UI display only. This property is not supported by "HzThstat" device class and returns NullUShortInputSig when read. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from DinThstat)
Public propertyInvalidFcuChangeoverTemperatureFeedback Property to indicate when a 2-pipe fan coil unit system does not have an auto changeover (pipe) temperature sensor available. This will be high either when no sensor is defined as such, or when its data is not valid. True: The 2-pipe fan coil unit does not have a valid auto changeover sensor, False : The 2-pipe fan coil unit does have a valid auto changeover sensor.

The BaseEvent event will trigger with InvalidFcuChangeoverTemperatureEventId object.

Public propertyInvalidFloorTemperatureFeedback Property to report if the device does not have a valid sensor source for floor temperature regulation/max temperature limiting. true = no valid sensor present; false = valid sensor present

The BaseEvent event will trigger with InvalidFloorTemperatureFeedbackEventId object.


(Inherited from DinThstat)
Public propertyInvalidOutdoorTemperatureFeedback Property to report when device requires outdoor temperature and no valid source is present. Outdoor temperature is required in heat pump systems for proper balance point operation. Device may operate sub-optimally with timing-based safeguards to ensure freeze out protection. Note for balance point operation, outdoor temperature may be sourced from control system via OutdoorTemperatureInput. true = no valid sensor present; false = valid sensor present

The BaseEvent event will trigger with InvalidOutdoorTemperatureFeedbackEventId object.


(Inherited from DinThstat)
Public propertyInvalidRegulationHumidityFeedback Indicates if device does not have a valid sensor source for space humidity regulation. true = valid sensor not present; false = valid sensor present

The BaseEvent event will trigger with RegHumInvalidEventId.


(Inherited from DinThstat)
Public propertyInvalidRegulationTemperatureFeedback Indicates that if device does not have a valid sensor source for space (air) temperature regulation. true = no valid sensor present; false = valid sensor present

The BaseEvent event will trigger with InvalidRegulationTemperatureFeedbackEventId object.


(Inherited from DinThstat)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLocalHumidityFeedback Property to indicate local humidity on the device.

The HumidityEvent event will trigger with eHumidityType and LocalHumidityFeedback value.

Public propertyLocalTemperatureFeedback Reports the local temperature reported by the Local sensor. Only enabled when EnableSensorOutputs is enabled. This property is supported by "HZThstat" not supported by "DinThstat".

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from Thermostat)
Public propertyMaximumAuto1ptSetpointFeedback Property to report maximum auto setpoint (single-SP format) in 10ths of current unit.

The BaseEvent event will trigger with MaximumAuto1ptSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMaximumCoolSetpointFeedback Property to report maximum cool setpoint in 10ths of the current unit.

The BaseEvent event will trigger with MaximumCoolSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMaximumFloorWarmingSetpointFeedback Property to report maximum floor warming setpoint in 10ths of the current unit.

The BaseEvent event will trigger with MaximumFloorWarmingSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMaximumHeatSetpointFeedback Property to report maximum heat setpoint in 10ths of the current unit (required for scheduler).

The BaseEvent event will trigger with MaximumHeatSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMaximumHumiditySetpointFeedback Reports the maximum humidistat setpoint in 1% RH ticks. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The BaseEvent event will trigger with MaximumHumiditySetpointFeedbackEventId.


(Inherited from DinThstat)
Public propertyMinimumAuto1ptSetpointFeedback Property to report minimum auto setpoint (single-SP format) in 10ths of current unit.

The BaseEvent event will trigger with MinimumAuto1ptSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMinimumCoolSetpointFeedback Property to report minimum cool setpoint in 10ths of the current unit.

The BaseEvent event will trigger with MinimumCoolSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMinimumFloorWarmingSetpointFeedback Property to report minimum floor warming setpoint in 10ths of the current unit.

The BaseEvent event will trigger with MinimumFloorWarmingSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMinimumHeatSetpointFeedback Property to report minimum heat setpoint in 10ths of the current unit (required for scheduler).

The BaseEvent event will trigger with MinimumHeatSetpointFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertyMinimumHumiditySetpointFeedback Reports the minimum humidistat setpoint in 1% RH ticks. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The BaseEvent event will trigger with MinimumHumiditySetpointFeedbackEventId.


(Inherited from DinThstat)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNumberOfRelayPorts Number of relay ports this device supports on Current System State slot. HZ-THSTAT does not support this property and returns '0' when used.
(Inherited from DinThstat)
Public propertyOutdoorHumidity Property to provide outdoor humidity in 1%RH ticks. For displaying OD conditions on UI. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
(Inherited from DinThstat)
Public propertyOutdoorHumidityFeedback Property to report the outdoor humidity in 1%RH ticks. For displaying OD conditions on UI. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The HumidityEvent event will trigger with eHumidityType and OutdoorHumidityFeedback value.


(Inherited from DinThstat)
Public propertyOutdoorTemperatureFeedback Sends the current outdoor temperature to the thermostat. This input should only be used for heatpump/dual fuel balance point systems, not heat/cool system types. The value should be sent in tenths of a degree (1d = 0.1 degrees) based on the current temperature scale (Fahrenheit or Celsius). For example, if the outdoor temperature is 45.3°F, the value should be 453.

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from Thermostat)
Public propertyOutdoorTemperatureInput Sends the current outdoor temperature to the thermostat. This input should only be used for heatpump/dual fuel balance point systems, not heat/cool system types. The value should be sent in tenths of a degree (1d = 0.1 degrees) based on the current temperature scale (Fahrenheit or Celsius). For example, if the outdoor temperature is 45.3°F, the value should be 453d.
(Inherited from Thermostat)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRawRelayCallMaskFeedback Reports a mask of the actual relays being called. For debug only. Normal end user UI operation would not want to use this signal.

The BaseEvent event will trigger with RawRelayCallMaskFeedbackEventId.


(Inherited from DinThstat)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRegulationHumidityFeedback Reports the current value of the humidistat regulation humidity (as would be displayed on the thermostat UI, which can be an average of multiple sensors).

The HumidityEvent event will trigger with eHumidityType and RegulationHumidityFeedback value.


(Inherited from DinThstat)
Public propertyRegulationTemperatureFeedback Reports displayed temperature, which can be the Local temperature or the Remote 1 temperature, or the average of Local and Remote 1, based on the option selected in the Setup menu (Local = i; Remote 1 = r; Average = ir).

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from Thermostat)
Public propertyRelayPorts Collection of relay ports on the device on Current System State slot. HZ-THSTAT does not support this property and returns an empty collection when used.
(Inherited from DinThstat)
Public propertyRemote1HumidityFeedback

Reports the humidity reading of the Remote 1 humidity sensor in whole numbers. The Remote 1 humidity reading is reported regardless of the Use/Omit/OD designation.

The HumidityEvent event will trigger with eHumidityType and Remote1HumidityFeedback value.


(Inherited from DinThstat)
Public propertyRemote1TemperatureFeedback Reports the temperature reported by the Remote 1 sensor. Only enabled when EnableSensorOutputs is enabled.

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from Thermostat)
Public propertyRemote2HumidityFeedback Reports the humidity reading of the Remote 2 humidity sensor in whole numbers. The Remote 2 humidity reading is reported regardless of the Use/Omit/OD designation.

The HumidityEvent event will trigger with eHumidityType and Remote2HumidityFeedback value.


(Inherited from DinThstat)
Public propertyRemote2TemperatureFeedback Reports the local temperature reported by the Remote 2 sensor. Only enabled when EnableSensorOutputs is enabled.

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from Thermostat)
Public propertyRemote3HumidityFeedback Reports the humidity reading of the Remote 3 humidity sensor in whole numbers. The Remote 3 humidity reading is reported regardless of the Use/Omit/OD designation. This property is not supported for HZ-THSTAT.

The HumidityEvent event will trigger with eHumidityType and Remote3HumidityFeedback value.


(Inherited from DinThstat)
Public propertyRemote3TemperatureFeedback Reports the temperature from the remote sensor channel3 in tenths of the current unit, regardless of how sensor is configured. This property is not supported by HZ-THSTAT.

The TemperatureChange event will trigger with temperatureType and newTemperature.


(Inherited from DinThstat)
Public propertySchedulerEnabledFeedback Property to indicate if Scheduler operation is available. Some installations may not require scheduler operation (not related to run/hold state).

The BaseEvent event will trigger with SchedulerEnabledFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertySchedulerOperation Scheduler Operation present on this device. This property will be 'null' when not supported. This Property is not supported by HZ-THSTAT.

This property will trigger BaseEvent with event IDs defined in DinThstat.


(Inherited from DinThstat)
Public propertySchedulerRunHold Property to set the run/hold state of the scheduler.
(Inherited from DinThstat)
Public propertySchedulerRunHoldFeedback Property to report the run/hold state of the scheduler.

The BaseEvent event will trigger with SchedulerRunHoldFeedbackEventId.


(Inherited from DinThstat)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySpaceAutoEnabledFeedback Property to indicate if the space auto system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.

The BaseEvent event will trigger with SpaceAutoEnabledFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertySpaceAuxHeatEnabledFeedback Property to indicate if aux-heat-only mode is available. Duplicates AnySpaceSystemTypeFeedback state. For clarity, may want to keep a dedicated signal.

The BaseEvent event will trigger with SpaceAuxHeatEnabledFeedbackEventId for this property.


(Inherited from DinThstat)
Public propertySpaceCoolEnabledFeedback Property to indicate if the space cool system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.

The BaseEvent event will trigger with SpaceCoolEnabledFeedbackEventId.


(Inherited from DinThstat)
Public propertySpaceHeatEnabledFeedback Property to indicate if the space heat system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.

The BaseEvent event will trigger with SpaceHeatEnabledFeedbackEventId.


(Inherited from DinThstat)
Public propertySpaceSystemMode Sets the space system mode.
(Inherited from DinThstat)
Public propertySpaceSystemModeFeedback Reports the commanded/current space system mode.

The BaseEvent event will trigger with SpaceSystemModeFeedbackEventId.


(Inherited from DinThstat)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUiLanguage Property to set the HZ-THSTAT User Interface Language. Property not supported by DIN-TSTAT, returns '0' when used. Property not supported by HZ-TSTAT in the 1.000.XXXX firmware release. Reserved for future use.
(Inherited from DinThstat)
Public propertyUiLanguageFeedback Property to report the current HZ-THSTAT User Interface Language. Property not supported by DIN-TSTAT, returns '0' when used. Property not supported by HZ-TSTAT in the 1.000.XXXX firmware release. Reserved for future use.

The BaseEvent event will trigger with UiLanguageFeedbackEventId.


(Inherited from DinThstat)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Public propertyZoneName Property for naming device zone/use.
(Inherited from DinThstat)
Public propertyZoneNameFeedback Property to return the name of the device zone/use.

The BaseEvent event will trigger with ZoneNameFeedbackEventId.


(Inherited from DinThstat)
Top
Methods
 NameDescription
Protected method_CurrentSystemStateSlot_CueChange Event handler for Current System State sigs.
(Inherited from DinThstat)
Protected method_HeatCoolControlSlot_CueChange Event handler for Heat Cool Space sigs.
(Inherited from DinThstat)
Protected method_SystemConfigurationSlot_CueChange Event handler for System Configuration sigs.
(Inherited from DinThstat)
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from GenericDevice)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodInitializeSchedulerOperation Protected function to initialized the SchedulerOperation.
(Inherited from DinThstat)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Protected methodOnClimateControlComponentEvent Method to fire the climate control component change event.
(Inherited from Thermostat)
Protected methodOnFanCallEvent Method to fire the fan event.
(Inherited from Thermostat)
Protected methodOnHumidityChange Method to fire the HumidityEvent event.
(Inherited from DinThstat)
Protected methodOnTemperatureChange Method to fire the temperature change event.
(Inherited from Thermostat)
Public methodReadSetupData Method to refresh the data on FullSetupDataFeedback.
(Inherited from DinThstat)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodResetFanRunTime Method to reset the fan run time.
Public methodSendParameters This will send the parameters fields (if any) to the device. It allows the parameters to be modified and resent without unregistering and re-registering a device.
(Inherited from DinThstat)
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Public methodWriteSetupData Method to apply the setup data presented on FullSetupData.
(Inherited from DinThstat)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventClimateControlComponentCallChange Event fired when a climate component change was received from the device.
(Inherited from Thermostat)
Public eventFanCallChange Event fired when a fan change was received from the device.
(Inherited from Thermostat)
Public eventHumidityEvent Event triggered when a feedback has changed for this DinThstat.
(Inherited from DinThstat)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Public eventTemperatureChange Event fired when a temperature change was received from the device.
(Inherited from Thermostat)
Top
Fields
 NameDescription
Protected field_CoolCallFeedbacks Returns a collection of components that indicate when the system is calling for cooling.
(Inherited from Thermostat)
Protected field_CurrentSystemStateSlot Current system state slot device.
(Inherited from Thermostat)
Protected field_HeatCallFeedbacks A collection of components that indicate when the system is calling for heat.
(Inherited from Thermostat)
Protected field_HeatCoolControlSlot Heat/cool control slot device.
(Inherited from Thermostat)
Protected field_hTherm Humidity thermostat component of thermostat.
(Inherited from DinThstat)
Protected field_SystemConfigurationSlot System configuration slot device.
(Inherited from Thermostat)
Public fieldStatic memberAnyFcuSystemTypeEventId The value of AnyFcuSysTypeFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberAuxHeatCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberCoolCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberFanCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberFanRunTimeHoursFeedbackEventId The value of FanRunTimeHoursFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFanSpeedFeedbackEventId The value of FanSpeedFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuAutoChangeoverCoolDetectedEventId The state of FcuAutoChangeoverCoolDetectedFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuAutoChangeoverHeatDetectedEventId The state of FcuAutoChangeoverHeatDetectedFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuAutoChangeoverTemperatureEventId The value of FcuAutoChangeoverTemperatureFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuAvailableFanSpeedsMaskEventId The value of FcuAvailableFanSpeedsMaskFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuFanSpeedStagingEnabledEventId The state of FcuFanSpeedStagingEnabledFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFcuSystemIs2pipeEventId The state of FcuSysIs2pipeFeedback has changed.

The BaseEvent event will trigger for this event id.

Public fieldStatic memberFloorWarmingCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberHeatCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberHumidistatCallShortCycleTimeoutHoldOffFeedbackEventIdObsolete.
Public fieldStatic memberInvalidFcuChangeoverTemperatureEventId The state of InvalidFcuChangeoverTemperatureFeedback has changed.

The BaseEvent event will trigger for this event id.

Protected fieldNumberOfAuxHeatStages The number of auxiliary heat stages on this device.
(Inherited from DinThstat)
Protected fieldNumberOfCoolStages The number of cool stages on this device.
(Inherited from DinThstat)
Protected fieldNumberOfDehumidifierStages The number of dehumidity stages on this device.
(Inherited from DinThstat)
Protected fieldNumberOfFloorWarmingStages The number of floor warming stages on this device.
(Inherited from DinThstat)
Protected fieldNumberOfHeatStages The number of heat stages on this device.
(Inherited from DinThstat)
Protected fieldNumberOfHumidifierStages The number of humidity stages on this device.
(Inherited from DinThstat)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also