Din |
This class will trigger BaseEvent, HumidityEvent, FanCallChangeClimateControlComponentCallChange and TemperatureChange events.
public class DinThstat : Thermostat, ISendParameters, IRelayPorts
The DinThstat type exposes the following members.
| Name | Description | |
|---|---|---|
| DinThstat(UInt32, CrestronControlSystem) | Constructor to create a new DinThstat object. | |
| DinThstat(UInt32, IDeviceBranch) | Constructor to create a new DinThstat object. |
| Name | Description | |
|---|---|---|
| AnyFloorHeatSystemTypeFeedback |
Property to indicate if any system type using floor radiant heat is defined (can be both floor warming and space heating via floor radiant).
true = A system type using floor radiant heat is defined; false = No system type using floor radiant heat is defined
The BaseEvent event will trigger with AnyFloorHeatSystemTypeFeedbackEventId. | |
| AnyHeatpumpSystemTypeFeedback |
Property to indicate if any heat pump control logic is used.
true = A heat pump control logic is used; false = No heat pump control logic is used
The BaseEvent event will trigger with AnyHeatpumpSystemTypeFeedbackEventId. | |
| AnySpaceSystemTypeFeedback |
Property to indicate that if any space system type defined.
true = A space system is defined; false = No space system is defined
The BaseEvent event will trigger with AnySpaceSystemTypeFeedbackEventId. | |
| Auto1ptSetpoint |
Sets the auto1pt setpoint, where 1d = 0.1 degrees.
The value is based on the current temperature scale (Fahrenheit or Celsius).
The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat) | |
| Auto1ptSetpointFeedback |
Reports the active auto1pt setpoint value.
This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.
The BaseEvent event will trigger with Auto1ptSetpointFeedbackEventId. (Inherited from Thermostat) | |
| AutoDeadbandFeedback |
Reports the auto deadband value selected via the "db" option in the Setup menu, where 1d = 0.1 degrees.
In dual-setpoint auto mode, this value is the minimum separation between heat and cool setpoints,
which prevents the system from toggling back and forth due to overshoot.
In single-setpoint auto mode, this value sets the hysteresis used when changing from heat to cool.
For example, if the setpoint is 70°F with auto deadband of 2 degrees,
the temperature would have to rise to 72°F before running cool, and 68°F before running heat.
HZ-THSTAT reports auto mode deadband parameter in 10ths of current unit:
Fahrenheit : 20, 30, 40, 50, 60 (F).
Celsius : 10, 20, 30 (C).
The BaseEvent event will trigger with AutoDeadbandFeedbackEventId. (Inherited from Thermostat) | |
| AuxHeatCallFeedbacks |
Returns a collection of components that indicate when the system is calling for auxiliary heat.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. | |
| AuxInputActiveFeedback |
Indicates that the general-purpose opto-isolated input has voltage applied.
This property is not supported by HZ-THSTAT.
The BaseEvent event will trigger with AuxInputActiveFeedbackEventId object. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| CoolCallFeedbacks |
Returns a collection of components that indicate when the system is calling for cooling.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. (Inherited from Thermostat) | |
| CoolSetpoint |
Sets the cool setpoint, where 1d = 0.1 degrees.
The value is based on the current temperature scale (Fahrenheit or Celsius).
The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat) | |
| CoolSetpointFeedback |
Reports the active cool setpoint value.
This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.
The BaseEvent event will trigger with CoolSetpointFeedbackEventId. (Inherited from Thermostat) | |
| DehumidityCallFeedbacks |
Returns a collection of components that indicate when the system is making a dehumidity call.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DinUnitUiLockout | Property to lock out operation of the UI on the DIN-THSTAT unit. | |
| DisplayMessage | Property to set a string for displaying brief messages on remote UI. | |
| DisplayUnit | Property to accept an enumeration for defining temperature unit format. | |
| DisplayUnitFeedback |
Property to report the enumeration for defining temperature unit format.
The BaseEvent event will trigger with DisplayUnitFeedbackEventId for this property. | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| DualSetpointsAutoModeFeedback |
Property to indicate if auto mode uses separate heat and cool SP’s (instead of the single SP format).
The BaseEvent event will trigger with DualSetpointsAutoModeFeedbackEventId for this property. | |
| FanCallFeedback |
Indicates that the fan is running.
The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState. | |
| FanCirculationCallFeedback |
Indicates that the fan is circulating.
The FanCallChange event will trigger with ThermostatFanSpeed and ThermostatFanState. | |
| FanMode | Sets the fan mode. | |
| FanModeFeedback |
Reports the commanded/current fan mode.
The BaseEvent event will trigger with FanModeFeedbackEventId. | |
| FloorTemperatureFeedback |
Reports the current floor temperature in tenths of current unit.
This is like the “regulation” values from other slots, which can be an average of more than one floor sensor.
However, it is reported for any floor radiant system configuration, even if the type does not control the floor temperature.
The TemperatureChange event will trigger with temperatureType and newTemperature. | |
| FloorWarmingCallFeedbacks |
Returns a collection of components that indicate when the system is making a floor warming call.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. | |
| FloorWarmingMode | Property to set the floor warming mode. | |
| FloorWarmingModeFeedback |
Property to report the floor warming system mode.
The BaseEvent event will trigger with FloorWarmingModeFeedbackEventId. | |
| FloorWarmingSetpoint | Property to set the floor warming setpoint value in tenths of the current unit. | |
| FloorWarmingSetpointFeedback |
Reports the current floor warming setpoint value in tenths of the current unit.
The BaseEvent event will trigger with FloorWarmingSetpointFeedbackEventId. | |
| FloorWarmingSystemTypeFeedback |
Property to indicate if a floor warming system type is defined (independent signal; floor warming can be controlled separately from space).
true = A floor warming system type is defined; false = No floor warming system type is defined
The BaseEvent event will trigger with FloorWarmingSystemTypeFeedbackEventId. | |
| FullSetupData | Property to store full setup configuration for advanced debug or remote configuration. | |
| FullSetupDataFeedback |
Property to read full setup configuration for advanced debug or remote configuration.
FullSetupDataFeedback will trigger the event FullSetupDataFeedbackEventId. | |
| HeatCallFeedbacks |
Returns a collection of components that indicate when the system is calling for heat.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. (Inherited from Thermostat) | |
| HeatSetpoint |
Sets the heat setpoint, where 1d = 0.1 degrees.
The value is based on the current temperature scale (Fahrenheit or Celsius).
The displayed value is rounded to whole or half degrees based on the setting.
(Inherited from Thermostat) | |
| HeatSetpointFeedback |
Reports the active heat setpoint value.
This output should be connected to the corresponding setpoint input; otherwise the output will not report the setpoint value.
The BaseEvent event will trigger with HeatSetpointFeedbackEventId. (Inherited from Thermostat) | |
| HumidistatEnabledFeedback |
Property to indicate if the humidistat operation is available. This is the humidistat feature enable, not the on/off mode control signal.
The BaseEvent event will trigger with HumidifierEnableFeedbackEventId for this property. | |
| HumidistatMode | Sets the Humidistat mode. | |
| HumidistatModeFeedback |
Reports the current Humidistat mode.
The BaseEvent event will trigger with HumidifierModeFeedbackEventId for this property. | |
| HumidityCallFeedbacks |
Returns a collection of components that indicate when the system is making a humidity call.
The ClimateControlComponentCallChange event will trigger with ClimateControlComponent object. | |
| HumiditySetpoint | Reports the current Humidistat setpoint value in 1% RH ticks. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| HumiditySetpointFeedback |
Reports the current Humidistat setpoint value in 1% RH ticks.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The BaseEvent event will trigger with HumiditySetpointFeedbackEventId. | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IndoorHumidity | Property to provide indoor humidity in 1%RH ticks. For UI display only. This property is not supported by "HzThstat" device class and returns NullUShortInputSig when read. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| InvalidFloorTemperatureFeedback |
Property to report if the device does not have a valid sensor source for floor temperature regulation/max temperature limiting.
true = no valid sensor present; false = valid sensor present
The BaseEvent event will trigger with InvalidFloorTemperatureFeedbackEventId object. | |
| InvalidOutdoorTemperatureFeedback |
Property to report when device requires outdoor temperature and no valid source is present.
Outdoor temperature is required in heat pump systems for proper balance point operation.
Device may operate sub-optimally with timing-based safeguards to ensure freeze out protection.
Note for balance point operation, outdoor temperature may be sourced from control system via OutdoorTemperatureInput.
true = no valid sensor present; false = valid sensor present
The BaseEvent event will trigger with InvalidOutdoorTemperatureFeedbackEventId object. | |
| InvalidRegulationHumidityFeedback |
Indicates if device does not have a valid sensor source for space humidity regulation.
true = valid sensor not present; false = valid sensor present
The BaseEvent event will trigger with RegHumInvalidEventId. | |
| InvalidRegulationTemperatureFeedback |
Indicates that if device does not have a valid sensor source for space (air) temperature regulation.
true = no valid sensor present; false = valid sensor present
The BaseEvent event will trigger with InvalidRegulationTemperatureFeedbackEventId object. | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LocalTemperatureFeedback |
Reports the local temperature reported by the Local sensor.
Only enabled when EnableSensorOutputs is enabled.
This property is supported by "HZThstat" not supported by "DinThstat".
The TemperatureChange event will trigger with temperatureType and newTemperature. (Inherited from Thermostat) | |
| MaximumAuto1ptSetpointFeedback |
Property to report maximum auto setpoint (single-SP format) in 10ths of current unit.
The BaseEvent event will trigger with MaximumAuto1ptSetpointFeedbackEventId for this property. | |
| MaximumCoolSetpointFeedback |
Property to report maximum cool setpoint in 10ths of the current unit.
The BaseEvent event will trigger with MaximumCoolSetpointFeedbackEventId for this property. | |
| MaximumFloorWarmingSetpointFeedback |
Property to report maximum floor warming setpoint in 10ths of the current unit.
The BaseEvent event will trigger with MaximumFloorWarmingSetpointFeedbackEventId for this property. | |
| MaximumHeatSetpointFeedback |
Property to report maximum heat setpoint in 10ths of the current unit (required for scheduler).
The BaseEvent event will trigger with MaximumHeatSetpointFeedbackEventId for this property. | |
| MaximumHumiditySetpointFeedback |
Reports the maximum humidistat setpoint in 1% RH ticks.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The BaseEvent event will trigger with MaximumHumiditySetpointFeedbackEventId. | |
| MinimumAuto1ptSetpointFeedback |
Property to report minimum auto setpoint (single-SP format) in 10ths of current unit.
The BaseEvent event will trigger with MinimumAuto1ptSetpointFeedbackEventId for this property. | |
| MinimumCoolSetpointFeedback |
Property to report minimum cool setpoint in 10ths of the current unit.
The BaseEvent event will trigger with MinimumCoolSetpointFeedbackEventId for this property. | |
| MinimumFloorWarmingSetpointFeedback |
Property to report minimum floor warming setpoint in 10ths of the current unit.
The BaseEvent event will trigger with MinimumFloorWarmingSetpointFeedbackEventId for this property. | |
| MinimumHeatSetpointFeedback |
Property to report minimum heat setpoint in 10ths of the current unit (required for scheduler).
The BaseEvent event will trigger with MinimumHeatSetpointFeedbackEventId for this property. | |
| MinimumHumiditySetpointFeedback |
Reports the minimum humidistat setpoint in 1% RH ticks.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The BaseEvent event will trigger with MinimumHumiditySetpointFeedbackEventId. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NumberOfRelayPorts | Number of relay ports this device supports on Current System State slot. HZ-THSTAT does not support this property and returns '0' when used. | |
| OutdoorHumidity | Property to provide outdoor humidity in 1%RH ticks. For displaying OD conditions on UI. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| OutdoorHumidityFeedback |
Property to report the outdoor humidity in 1%RH ticks. For displaying OD conditions on UI.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The HumidityEvent event will trigger with eHumidityType and OutdoorHumidityFeedback value. | |
| OutdoorTemperatureFeedback |
Sends the current outdoor temperature to the thermostat.
This input should only be used for heatpump/dual fuel balance point systems, not heat/cool system types.
The value should be sent in tenths of a degree (1d = 0.1 degrees) based on the current temperature scale (Fahrenheit or Celsius).
For example, if the outdoor temperature is 45.3°F, the value should be 453.
The TemperatureChange event will trigger with temperatureType and newTemperature. (Inherited from Thermostat) | |
| OutdoorTemperatureInput |
Sends the current outdoor temperature to the thermostat.
This input should only be used for heatpump/dual fuel balance point systems, not heat/cool system types.
The value should be sent in tenths of a degree (1d = 0.1 degrees) based on the current temperature scale (Fahrenheit or Celsius).
For example, if the outdoor temperature is 45.3°F, the value should be 453d.
(Inherited from Thermostat) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| RawRelayCallMaskFeedback |
Reports a mask of the actual relays being called. For debug only.
Normal end user UI operation would not want to use this signal.
The BaseEvent event will trigger with RawRelayCallMaskFeedbackEventId. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| RegulationHumidityFeedback |
Reports the current value of the humidistat regulation humidity (as would be displayed on the thermostat UI, which can be an average of multiple sensors).
The HumidityEvent event will trigger with eHumidityType and RegulationHumidityFeedback value. | |
| RegulationTemperatureFeedback |
Reports displayed temperature, which can be the Local temperature or the Remote 1 temperature, or the average of Local and Remote 1,
based on the option selected in the Setup menu (Local = i; Remote 1 = r; Average = ir).
The TemperatureChange event will trigger with temperatureType and newTemperature. (Inherited from Thermostat) | |
| RelayPorts | Collection of relay ports on the device on Current System State slot. HZ-THSTAT does not support this property and returns an empty collection when used. | |
| Remote1HumidityFeedback | Reports the humidity reading of the Remote 1 humidity sensor in whole numbers. The Remote 1 humidity reading is reported regardless of the Use/Omit/OD designation. The HumidityEvent event will trigger with eHumidityType and Remote1HumidityFeedback value. | |
| Remote1TemperatureFeedback |
Reports the temperature reported by the Remote 1 sensor.
Only enabled when EnableSensorOutputs is enabled.
The TemperatureChange event will trigger with temperatureType and newTemperature. (Inherited from Thermostat) | |
| Remote2HumidityFeedback |
Reports the humidity reading of the Remote 2 humidity sensor in whole numbers.
The Remote 2 humidity reading is reported regardless of the Use/Omit/OD designation.
The HumidityEvent event will trigger with eHumidityType and Remote2HumidityFeedback value. | |
| Remote2TemperatureFeedback |
Reports the local temperature reported by the Remote 2 sensor.
Only enabled when EnableSensorOutputs is enabled.
The TemperatureChange event will trigger with temperatureType and newTemperature. (Inherited from Thermostat) | |
| Remote3HumidityFeedback |
Reports the humidity reading of the Remote 3 humidity sensor in whole numbers.
The Remote 3 humidity reading is reported regardless of the Use/Omit/OD designation.
This property is not supported for HZ-THSTAT.
The HumidityEvent event will trigger with eHumidityType and Remote3HumidityFeedback value. | |
| Remote3TemperatureFeedback |
Reports the temperature from the remote sensor channel3 in tenths of the current unit, regardless of how sensor is configured.
This property is not supported by HZ-THSTAT.
The TemperatureChange event will trigger with temperatureType and newTemperature. | |
| SchedulerEnabledFeedback |
Property to indicate if Scheduler operation is available. Some installations may not require scheduler operation (not related to run/hold state).
The BaseEvent event will trigger with SchedulerEnabledFeedbackEventId for this property. | |
| SchedulerOperation |
Scheduler Operation present on this device. This property will be 'null' when not supported.
This Property is not supported by HZ-THSTAT.
This property will trigger BaseEvent with event IDs defined in DinThstat. | |
| SchedulerRunHold | Property to set the run/hold state of the scheduler. | |
| SchedulerRunHoldFeedback |
Property to report the run/hold state of the scheduler.
The BaseEvent event will trigger with SchedulerRunHoldFeedbackEventId. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SpaceAutoEnabledFeedback |
Property to indicate if the space auto system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.
The BaseEvent event will trigger with SpaceAutoEnabledFeedbackEventId for this property. | |
| SpaceAuxHeatEnabledFeedback |
Property to indicate if aux-heat-only mode is available. Duplicates AnySpaceSystemTypeFeedback state. For clarity, may want to keep a dedicated signal.
The BaseEvent event will trigger with SpaceAuxHeatEnabledFeedbackEventId for this property. | |
| SpaceCoolEnabledFeedback |
Property to indicate if the space cool system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.
The BaseEvent event will trigger with SpaceCoolEnabledFeedbackEventId. | |
| SpaceHeatEnabledFeedback |
Property to indicate if the space heat system mode is available. Unsupported modes can be disabled in setup to reduce UI clutter.
The BaseEvent event will trigger with SpaceHeatEnabledFeedbackEventId. | |
| SpaceSystemMode | Sets the space system mode. | |
| SpaceSystemModeFeedback |
Reports the commanded/current space system mode.
The BaseEvent event will trigger with SpaceSystemModeFeedbackEventId. | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UiLanguage | Property to set the HZ-THSTAT User Interface Language. Property not supported by DIN-TSTAT, returns '0' when used. Property not supported by HZ-TSTAT in the 1.000.XXXX firmware release. Reserved for future use. | |
| UiLanguageFeedback |
Property to report the current HZ-THSTAT User Interface Language.
Property not supported by DIN-TSTAT, returns '0' when used.
Property not supported by HZ-TSTAT in the 1.000.XXXX firmware release. Reserved for future use.
The BaseEvent event will trigger with UiLanguageFeedbackEventId. | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) | |
| ZoneName | Property for naming device zone/use. | |
| ZoneNameFeedback |
Property to return the name of the device zone/use.
The BaseEvent event will trigger with ZoneNameFeedbackEventId. |
| Name | Description | |
|---|---|---|
| _CurrentSystemStateSlot_CueChange |
Event handler for Current System State sigs.
(Overrides Thermostat_CurrentSystemStateSlot_CueChange(CrestronDeviceWithEvents, SigEventArgs)) | |
| _HeatCoolControlSlot_CueChange |
Event handler for Heat Cool Space sigs.
(Overrides Thermostat_HeatCoolControlSlot_CueChange(CrestronDeviceWithEvents, SigEventArgs)) | |
| _SystemConfigurationSlot_CueChange |
Event handler for System Configuration sigs.
(Overrides Thermostat_SystemConfigurationSlot_CueChange(CrestronDeviceWithEvents, SigEventArgs)) | |
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InitializeSchedulerOperation | Protected function to initialized the SchedulerOperation. | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| OnClimateControlComponentEvent |
Method to fire the climate control component change event.
(Inherited from Thermostat) | |
| OnFanCallEvent |
Method to fire the fan event.
(Inherited from Thermostat) | |
| OnHumidityChange | Method to fire the HumidityEvent event. | |
| OnTemperatureChange |
Method to fire the temperature change event.
(Inherited from Thermostat) | |
| ReadSetupData | Method to refresh the data on FullSetupDataFeedback. | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| SendParameters | This will send the parameters fields (if any) to the device. It allows the parameters to be modified and resent without unregistering and re-registering a device. | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) | |
| WriteSetupData | Method to apply the setup data presented on FullSetupData. |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| ClimateControlComponentCallChange |
Event fired when a climate component change was received from the device.
(Inherited from Thermostat) | |
| FanCallChange |
Event fired when a fan change was received from the device.
(Inherited from Thermostat) | |
| HumidityEvent | Event triggered when a feedback has changed for this DinThstat. | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) | |
| TemperatureChange |
Event fired when a temperature change was received from the device.
(Inherited from Thermostat) |
| Name | Description | |
|---|---|---|
| _CoolCallFeedbacks |
Returns a collection of components that indicate when the system is calling for cooling.
(Inherited from Thermostat) | |
| _CurrentSystemStateSlot |
Current system state slot device.
(Inherited from Thermostat) | |
| _HeatCallFeedbacks |
A collection of components that indicate when the system is calling for heat.
(Inherited from Thermostat) | |
| _HeatCoolControlSlot |
Heat/cool control slot device.
(Inherited from Thermostat) | |
| _hTherm | Humidity thermostat component of thermostat. | |
| _SystemConfigurationSlot |
System configuration slot device.
(Inherited from Thermostat) | |
| AnyFloorHeatSystemTypeFeedbackEventId |
The value of AnyFloorHeatSystemTypeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| AnyHeatpumpSystemTypeFeedbackEventId |
The value of AnyHeatpumpSystemTypeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| AnySpaceSystemTypeFeedbackEventId |
The value of AnySpaceSystemTypeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| AuxInputActiveFeedbackEventId |
The value of AuxInputActiveFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| CurrentEventFeedbackEventId |
The value of CurrentEventFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| DayOfNextEventFeedbackEventId |
The value of DayOfNextEventFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| DisplayUnitFeedbackEventId |
The value of DisplayUnitFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| DualSetpointsAutoModeFeedbackEventId |
The value of DualSetpointsAutoModeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FanModeFeedbackEventId |
The state of FanModeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FloorWarmingModeFeedbackEventId |
The state of FloorWarmingModeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FloorWarmingSetpointFeedbackEventId |
The state of FloorWarmingSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FloorWarmingSystemTypeFeedbackEventId |
The value of FloorWarmingSystemTypeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| FullSetupDataFeedbackEventId |
The value of FullSetupDataFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| InvalidFloorTemperatureFeedbackEventId |
The value of InvalidFloorTemperatureFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| InvalidOutdoorTemperatureFeedbackEventId |
The value of InvalidOutdoorTemperatureFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| InvalidRegulationTemperatureFeedbackEventId |
The value of InvalidRegulationTemperatureFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MaximumAuto1ptSetpointFeedbackEventId |
The value of MaximumAuto1ptSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MaximumCoolSetpointFeedbackEventId |
The value of MaximumCoolSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MaximumFloorWarmingSetpointFeedbackEventId |
The value of MaximumFloorWarmingSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MaximumHeatSetpointFeedbackEventId |
The value of MaximumHeatSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MinimumAuto1ptSetpointFeedbackEventId |
The value of MinimumAuto1ptSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MinimumCoolSetpointFeedbackEventId |
The value of MinimumCoolSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MinimumFloorWarmingSetpointFeedbackEventId |
The value of MinimumFloorWarmingSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| MinimumHeatSetpointFeedbackEventId |
The value of MinimumHeatSetpointFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| NextEventFeedbackEventId |
The value of NextEventFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| NumberOfAuxHeatStages | The number of auxiliary heat stages on this device. | |
| NumberOfCoolStages | The number of cool stages on this device. | |
| NumberOfDehumidifierStages | The number of dehumidity stages on this device. | |
| NumberOfFloorWarmingStages | The number of floor warming stages on this device. | |
| NumberOfHeatStages | The number of heat stages on this device. | |
| NumberOfHumidifierStages | The number of humidity stages on this device. | |
| RawRelayCallMaskFeedbackEventId |
The value of RawRelayCallMaskFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SchedulerEnabledFeedbackEventId |
The value of SchedulerEnabledFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SchedulerRunHoldFeedbackEventId |
The state of SchedulerRunHoldFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ScheduleVersionFeedbackEventId |
The value of ScheduleVersionFeedback has changed.
The BaseEvent event will trigger for this event id and Index will indicate the index into the ScheduleVersionFeedback collection. | |
| SpaceAutoEnabledFeedbackEventId |
The value of SpaceAutoEnabledFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SpaceAuxHeatEnabledFeedbackEventId |
The value of SpaceAuxHeatEnabledFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SpaceCoolEnabledFeedbackEventId |
The value of SpaceCoolEnabledFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SpaceHeatEnabledFeedbackEventId |
The value of SpaceHeatEnabledFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| SpaceSystemModeFeedbackEventId |
The state of SpaceSystemModeFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| TimeOfNextEventFeedbackEventId |
The value of TimeOfNextEventFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| UiLanguageFeedbackEventId |
The value of UiLanguageFeedback has changed.
The BaseEvent event will trigger for this event id. | |
| ZoneNameFeedbackEventId |
The value of ZoneNameFeedback has changed.
The BaseEvent event will trigger for this event id. |
DinThstat _myDinThstat; public ControlSystemDinThstat() { //Register console commands CrestronConsole.AddNewConsoleCommand(CreateDeviceCmd, "CreateDevice", "This is an DIN-THSTAT CreateDevice command", ConsoleAccessLevelEnum.AccessOperator); CrestronConsole.AddNewConsoleCommand(SetDisableInternalSchedulerCmd, "DisableInternalSch", "This is DIN-THSTAT disable Internal Scheduler command", ConsoleAccessLevelEnum.AccessOperator); } public void CreateDeviceCmd(String args) { _myDinThstat = new DinThstat(0x03, this); _myDinThstat.RelayPorts[1].StateChange += OnStateChange; _myDinThstat.RelayPorts[2].StateChange += OnStateChange; _myDinThstat.BaseEvent += DinThstatBaseEvent; _myDinThstat.TemperatureChange += MyDinThstatOnTemperatureChange; _myDinThstat.FanCallChange += MyDinThstatOnFanCallChange; _myDinThstat.ClimateControlComponentCallChange += MyDinThstatOnClimateControlComponentCallChange; _myDinThstat.HumidityEvent += MyDinThstatOnHumidityEvent; Thread.MaxNumberOfUserThreads = 20; _myDinThstat.Register(); } //Event handler for relay state changes static void OnStateChange(Relay relay, RelayEventArgs args) { CrestronConsole.PrintLine("Relay {0} state is {1}", relay.ID, args.State); } //Event handler for all humidity related sig changes static void MyDinThstatOnHumidityEvent(Thermostat paramThermostat, HumidityEventArgs args) { CrestronConsole.PrintLine("{0} Thermostat Humidity type is {1} Percentage is {2} \r\n", paramThermostat, args.humidityType, args.newHumidityPercentage); } //Event handler for all climate control component sig changes static void MyDinThstatOnClimateControlComponentCallChange(Thermostat paramThermostat, ClimateControlCallEventArgs args) { CrestronConsole.PrintLine("{0} Thermostat Climate Control Component type is {1} state is {2} stage is {3} \r\n", paramThermostat, args.ClimateControlComponent.ComponentType, args.ClimateControlComponent.ComponentState, args.ClimateControlComponent.Stage); } //Event handler for all fan call sig changes static void MyDinThstatOnFanCallChange(Thermostat paramThermostat, FanCallEventArgs args) { CrestronConsole.PrintLine("{0} Thermostat Fan Call Speed is {1} state is {2} \r\n", paramThermostat, args.ThermostatFanSpeed, args.ThermostatFanState); } //Event handler for all temperature sig changes static void MyDinThstatOnTemperatureChange(Thermostat paramThermostat, TemperatureEventArgs args) { CrestronConsole.PrintLine("{0} Thermostat Temperature type is {1} new Temperature is {2} \r\n", paramThermostat, args.temperatureType, args.newTemperature); } //Event handler for other sig changes public void DinThstatBaseEvent(GenericBase device, BaseEventArgs args) { if (args.EventId == DinThstat.SpaceSystemModeFeedbackEventId) { CrestronConsole.PrintLine("Space System Mode Feedback event for {0} occurred, value is {1}\r\n", device, _myDinThstat.SpaceSystemModeFeedback); } } public void SetDisableInternalSchedulerCmd(String args) { _myDinThstat.SchedulerOperation.PyngSupport(2); }