Click or drag to resize

Crestron.SimplSharpPro.Lighting.ZumWired Namespace

 
Classes
 ClassDescription
Public classZumDaliController Zum Dali controller class.
Public classZumDaliDriverReplacement Zum Dali Driver Replacement class.
Public classZumEnergyMonitor This is Energy Monitor Class for Zum Wired JBox devices. This class is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.

This class will trigger EnergyMonitorChange event.

Public classZumJBoxDaliDriver DALI Driver class for ZUMLINK JBOX DALI (GROUPS) Device.
Public classZumJBoxEventIds Event Id Class for ZUM JBOX Devices
Public classZumJBoxPlugLoad ZUM Wired Plug load class.
Public classZumJBoxPlugLoadBase ZUM Wired Plug load base class.
Public classZumJBoxSwitchLoad ZUM Wired Switch load class.
Public classZumJBoxSwitchLoadBase This is base class for ZumJBoxPlugLoad and ZumJBoxSwitchLoad.

This class will trigger BaseEvent, OverrideEventHandler events, whenever there is a External or Manual override feedback.

Public classZumLinkDin16ALv ZUM Wired 0-10V Dimming load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkDin20APlug ZUM Wired Plug load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkDin20ASw ZUM Wired Switching load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkDinDimu ZUM Wired 0-10V Dimming load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkDinIo ZUM Wired input output with two relays and no Photo and Occupancy sensor and Energy Monitor support on Cresnet.

This class will trigger LoadStateChange and OverrideEventHandler events.

Public classZumLinkDtQuattroDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkDtQuattroDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumLinkExp16ADimu ZUM Wired 0-10V Dimming load controller with one load and no Photo and Occupancy sensor and Energy Monitor support on Cresnet.

This class will trigger LoadStateChange and OverrideEventHandler events.

Public classZumLinkIoBase Base class for ZumLinkJBoxIo and ZumLinkDinIo.

This class will trigger LoadStateChange and ZumLinkJBoxIoLedChange events.

Public classZumLinkIrQuattroDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkIrQuattroDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumLinkIrQuattroHdDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkIrQuattroHdDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumLinkJBox16ALv ZUM Wired 0-10V Dimming load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkJbox20APlug ZUM Wired Plug load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkJbox20ASw ZUM Wired Switching load controller with one load on Cresnet with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumLinkJBoxIo ZUM Wired input output with two relays on Cresnet.

This class will trigger LoadStateChange and OverrideEventHandler events.

Public classZumLinkJBoxIoInputConfig ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO input config class.
Public classZumLinkJBoxIoInputs ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO Inputs class.
Public classZumLinkJBoxIoLed Class for ZumLinkJBoxIO LED class. This class triggers ZumLinkJBoxIoLedChange event.
Public classZumLinkOccupancySensor This is Occupancy Sensor class for Zum Link Occupancy Vacancy Sensor devices.

This class will trigger OccupancySensorChange event.

Public classZumLinkOccupancyVacancySensorBase This is base class for ZumLinkDtQuattroDls, ZumLinkIrQuattroDls, ZumLinkIrQuattroHdDls, ZumLinkUsHallwayDls, ZumLinkUsOnewayDls and ZumLinkUsQuattroDls.
Public classZumLinkOccupancyVacancySensorWithRelayBase This is base class for ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly and ZumLinkUsQuattroDlsRly.
Public classZumLinkRelay Relay class for ZUM Occupancy and Vacancy Sensor Devices.

This class will trigger BaseEvent and OverrideEventHandler events.

Public classZumLinkUsHallwayDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkUsHallwayDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumLinkUsOnewayDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkUsOnewayDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumLinkUsQuattroDls ZUM Wired Occupancy or Vacancy (Steinel) Sensor on Cresnet.

This class will trigger OccupancySensorChange and PhotoSensorChange events.

Public classZumLinkUsQuattroDlsRly ZUM Wired Occupancy or Vacancy (Steinel) Sensor with Relay on Cresnet.

This class will trigger OccupancySensorChange, PhotoSensorChange and LoadStateChange events.

Public classZumNetBridge Ethernet/Cresnet bridge that allows control system access to the components on the local cresnet bus within the room. Controls/coordinates room level

operations amongst devices on the room’s cresnet bus operates as a single client on the room’s cresnet bus cresnet bus master operation required for

room controller operation presents the Room as a device to the Ethernet network appears as a device on the room’s cresnet network allows operation

as an Ethernet/Cresnet Bridge to the devices on the room’s cresnet network this feature can be enabled/disabled from the control system cresnet bus

master operation required for Bridge operation, already present for Room Control.

Public classZumNetBridgeBase Base class for ZumNetBridge and ZumNetBridgeRoom device classes.
Public classZumNetBridgeRoom Ethernet/Cresnet bridge that allows control system access to the components on the local cresnet bus within the room and also allows the control system

to address the room as a whole through additional joins. Controls/coordinates room level operations amongst devices on the room’s cresnet bus operates

as a single client on the room’s cresnet bus. Cresnet bus master operation required for room controller operation presents the Room as a device to the

Ethernet network appears as a device on the room’s cresnet network allows operation as an Ethernet/Cresnet Bridge to the devices on the room’s cresnet

network this feature can be enabled/disabled from the control system cresnet bus master operation required for Bridge operation, already present for

Room Control.

Public classZumNetBridgeRoomZumWiredRoomInterface This is Room Interface Class for ZumNet Bridge devices.
Public classZumNetBridgeRoomZumWiredRoomInterfaceDevice Device class that has the info of a device on the JBOX unit. e.g. ZUMNET-JBOX-16A-LV have Dimming Load controller, Occupancy Sensor,

Photo Sensor and Energy Monitor devices on it.

Public classZumNetBridgeRoomZumWiredRoomInterfaceJBoxUnitInfo JBOX Unit Info class that has the details about the ZUM Wired JBOX Units and the Devices on the Units.
Public classZumNetBridgeRoomZumWiredRoomInterfaceUnit ZUM Wired JBOX Unit class, e.g. ZUMNET-JBOX-16A-LV.
Public classZumNetBridgeRoomEventIds Event Id Class for ZUMNET BRIDGE ROOM Device.
Public classZumNetDin16ALv ZUM Wired 0-10V Dimming load controller with one load on Cresnet and also has ethernet interface to act like ZUMNET-BRIDGE or ZOOM-NET-BRIDGE-ROOM,

with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumNetDinDliGroups This is ZUMNET-DIN-DLI(GROUPS) device class.

This class will trigger ZumDaliControllerChange ,EnergyMonitorChange, DaliDriverChange,ZumDaliDriverReplacementChange, OverrideEventHandler, OccupancySensorChange and PhotoSensorChangeevent.

Public classZumNetJBox16ALv ZUM Wired 0-10V Dimming load controller with one load on Cresnet and also has ethernet interface to act like ZUMNET-BRIDGE or ZOOM-NET-BRIDGE-ROOM,

with Photo and Occupancy Sensors and Energy Monitor.

This class will trigger LoadStateChange, OverrideEventHandler, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumNetJBoxDali ZUM Wired DALI load controller with 17 loads/groups including Dali Global group on Cresnet and also has ethernet interface to act like

ZUMNET-BRIDGE or ZOOM-NET-BRIDGE-ROOM.

This class will trigger BaseEvent, OverrideEventHandler, OccupancySensorChange and PhotoSensorChange events.

Public classZumNetJBoxDaliGroups This is ZUMNET-JBOX-DALI(Groups) device class.

This class will trigger ZumDaliControllerChange ,EnergyMonitorChange, DaliDriverChange,ZumDaliDriverReplacementChange,OverrideEventHandler, OccupancySensorChange and PhotoSensorChangeevent.

Public classZumNetJBoxDaliGroupsEventIds Event id class for ZUMNET-JBOX-DALI(Groups) device.
Public classZumNetJBoxDaliLegacy ZUMNET-JBOX-DALI-LEGACY class

This class will trigger BaseEvent, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumNetJBoxDinDaliCustomBase Base class for ZUMNET-JBOX-DALI-LEGACY devices.

This class will trigger BaseEvent, OccupancySensorChange, PhotoSensorChange and EnergyMonitorChange events.

Public classZumNetJBoxDinDaliGroupsBase This is base class for ZUMNET-JBOX-DALI(Groups) and ZUMNET-DIN-DLI(Groups) device classes.

This class will trigger ZumDaliControllerChange ,EnergyMonitorChange, DaliDriverChange,ZumDaliDriverReplacementChange,OverrideEventHandler, OccupancySensorChange and PhotoSensorChangeevent.

Public classZumOccupancySensor This is Occupancy Sensor class for Zum Wired JBox devices.

This class will trigger OccupancySensorChange event.

Public classZumPhotoSensor This is Photo Sensor Class for Zum Wired JBox devices.

This class will trigger PhotoSensorChange event.

Public classZumXJBoxDimmer This is base class for ZumLinkJBox16ALv, ZumNetJBox16ALv, "ZumLinkJBox16ALvE" ,"ZumLinkJBoxDali" and "ZumLinkExp16ADimu".
Public classZumXJBoxDimmer16ALv This is base class for ZumLinkJBox16ALv and ZumNetJBox16ALv.
Public classZumXJBoxDimmerWithPhotoAndOccupancySensors This is base class for ZumLinkJBox16ALv, ZumNetJBox16ALv and "ZumLinkJBoxDali".
Public classZumXJBoxPlug This is Base class for ZumLinkJbox20APlug.
Public classZumXJBoxSwitch This is base class for ZumLinkJbox20ASw.
Public classZumXJBoxSwitchBase This is base class for ZumXJBoxPlug and ZumXJBoxSwitch.
Enumerations
 EnumerationDescription
Public enumerationeLedBlinkPattern Enum to define the blink patterns.
Public enumerationZumDaliControllereAddressingOperation Enum to define the addressing Operation modes.
Public enumerationZumDaliControllereDaliMode Enum to define the dali mode.
Public enumerationZumDaliControllereDesiredGroupType Enum to define the desired group types.
Public enumerationZumDaliControllereDiagnosticStageOneStatusFlag Enum to define the diagnostic stage one status flags. Flags BusVoltageErrorand UnaddressedDriver means either one of these two flags will be set at any point of time.
Public enumerationZumJBoxDaliDrivereDaliDriverDiagnosticFlag Enum to define the diagnostic Flags of the driver. Flags Missing, CommunicationError and DuplicateDriverFound are mutually exclusive, means either one of these three flags will be set at any point of time.
Public enumerationZumNetBridgeRoomZumWiredRoomInterfaceeBluetoothPinAcceptanceValues Enum for bluetooth pin acceptance values.
Public enumerationZumNetBridgeRoomZumWiredRoomInterfaceeBluetoothPinAlert Enum for bluetooth pin alerts.
Public enumerationZumNetBridgeRoomZumWiredRoomInterfaceeBluetoothPinType Enum for Bluetooth pin types.
Public enumerationZumNetJBoxDinDaliCustomBaseeDaliOperatingMode Enum to define the device operating modes