Zum |
This class will trigger OccupancySensorChange event.
public class ZumOccupancySensor : IParentInformation
The ZumOccupancySensor type exposes the following members.
| Name | Description | |
|---|---|---|
| GraceOccupancyDetectedFeedback |
This property reports the grace occupancy state detected within 15s after a vacancy event.
True = Occupancy event detected within 15s of initial vacancy event; False = No occupancy event detected within 15s of initial vacancy event.
This property will trigger OccupancySensorChange event with GraceOccupancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| InfraredEnabledFeedback |
Property to report if the Infrared portion of sensor has been activated.
True = IR portion of the sensor is activated ; False = IR portion of the sensor is deactivated
This only applies to the Dual Technology (DT) products.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with InfraredEnabledEventId. | |
| OccupancyDetectedFeedback |
This property reports the occupancy state detected.
True = Occupancy detected; False = Vacancy detected.
This property will trigger OccupancySensorChange event with OccupancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| OccupancyRawInfraredStateFeedback |
This property reports the raw occupancy state for Infrared (IR) products only.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with OccupancyRawInfraredStateFeedbackEventId. | |
| OccupancyRawStateEnable |
This property is to enable/disable the reporting of raw states that are not tied to any timeout setting.
True: Enable raw occupancy digital output; False: Disable raw occupancy digital output This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| OccupancyRawStateFeedback |
This property reports the raw occupancy state.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property will trigger OccupancySensorChange event with OccupancyRawStateFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| OccupancyRawUltrasonicStateFeedback |
This property reports raw occupancy state for Ultrasonic (US) products only.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with OccupancyRawUltrasonicStateFeedbackEventId. | |
| Parent | The parent that a ZumOccupancySensor object was added to. | |
| TimeOut |
This property sets the timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied.
Timeout is set in seconds. The valid values range from 0 to 65535. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| TimeOutFeeback |
This property reports the current timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied.
Timeout is set in seconds. The valid values range from 0 to 65535.
This property will trigger OccupancySensorChange event with TimeOutFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| UltrasonicEnabledFeedback |
Property to report ultrasonic portion of sensor has been activated.
True = US (ultrasonic) portion of the sensor is activated; False = US (ultrasonic) portion of the sensor is deactivated
This only applies to the Dual Technology (DT) products.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with UltrasonicEnabledEventId. | |
| UserSpecifiedObject | Can be assigned anything that user wants. | |
| VacancyDetectedFeedback |
This property reports currently vacant (no motion detected) after the timeout has elapsed.
True = Vacancy detected; False = Occupancy Detected.
This property will trigger OccupancySensorChange event with VacancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. |
| Name | Description | |
|---|---|---|
| DisableInfrared | Method to deactivate the Infrared portion of sensor. This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| DisableUltrasonic | Method to deactivate ultrasonic portion of sensor. This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| EnableInfrared | Method to activate Infrared portion of sensor. This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| EnableOccupancyRawState | Obsolete. This method will enable the reporting of raw states that are not tied to any timeout setting. This method is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| EnableUltrasonic | Method to activate ultrasonic portion of the sensor. This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| ForceOccupied | This method forces the sensor to occupied state. This method is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| ForceVacant | This method forces the sensor to vacant state. This method is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| ForceVacnt | Obsolete. This method forces the sensor to vacant state. This method is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO. | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| OccupancySensorChange | Event triggered when a feedback has changed for this ZumOccupancySensor. |