Click or drag to resize

ZumOccupancySensor Properties

The ZumOccupancySensor type exposes the following members.

Properties
 NameDescription
Public propertyGraceOccupancyDetectedFeedback This property reports the grace occupancy state detected within 15s after a vacancy event. True = Occupancy event detected within 15s of initial vacancy event; False = No occupancy event detected within 15s of initial vacancy event.

This property will trigger OccupancySensorChange event with GraceOccupancyDetectedFeedbackEventId.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyInfraredEnabledFeedback Property to report if the Infrared portion of sensor has been activated. True = IR portion of the sensor is activated ; False = IR portion of the sensor is deactivated This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.

This property will trigger OccupancySensorChange event with InfraredEnabledEventId.

Public propertyOccupancyDetectedFeedback This property reports the occupancy state detected. True = Occupancy detected; False = Vacancy detected.

This property will trigger OccupancySensorChange event with OccupancyDetectedFeedbackEventId.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyOccupancyRawInfraredStateFeedback This property reports the raw occupancy state for Infrared (IR) products only. True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.

This property will trigger OccupancySensorChange event with OccupancyRawInfraredStateFeedbackEventId.

Public propertyOccupancyRawStateEnable This property is to enable/disable the reporting of raw states that are not tied to any timeout setting.

True: Enable raw occupancy digital output; False: Disable raw occupancy digital output

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyOccupancyRawStateFeedback This property reports the raw occupancy state. True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.

This property will trigger OccupancySensorChange event with OccupancyRawStateFeedbackEventId.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyOccupancyRawUltrasonicStateFeedback This property reports raw occupancy state for Ultrasonic (US) products only. True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.

This property will trigger OccupancySensorChange event with OccupancyRawUltrasonicStateFeedbackEventId.

Public propertyParent The parent that a ZumOccupancySensor object was added to.
Public propertyTimeOut This property sets the timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied.

Timeout is set in seconds. The valid values range from 0 to 65535.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyTimeOutFeeback This property reports the current timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied. Timeout is set in seconds. The valid values range from 0 to 65535.

This property will trigger OccupancySensorChange event with TimeOutFeedbackEventId.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Public propertyUltrasonicEnabledFeedback Property to report ultrasonic portion of sensor has been activated. True = US (ultrasonic) portion of the sensor is activated; False = US (ultrasonic) portion of the sensor is deactivated This only applies to the Dual Technology (DT) products. This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.

This property will trigger OccupancySensorChange event with UltrasonicEnabledEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Public propertyVacancyDetectedFeedback This property reports currently vacant (no motion detected) after the timeout has elapsed. True = Vacancy detected; False = Occupancy Detected.

This property will trigger OccupancySensorChange event with VacancyDetectedFeedbackEventId.

This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
Top
See Also