Click or drag to resize

ZumDaliController Class

Zum Dali controller class.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.Lighting.ZumWiredZumDaliController

Namespace: Crestron.SimplSharpPro.Lighting.ZumWired
Assembly: Crestron.SimplSharpPro.Lighting (in Crestron.SimplSharpPro.Lighting.dll) Version: 2.21.121
Syntax
C#
public sealed class ZumDaliController : IParentInformation

The ZumDaliController type exposes the following members.

Properties
 NameDescription
Public propertyAddress Property to set address. The address portion(1 byte) consistof the 2-byte DALI control/query command or special command.The high-order byte of the address value is ignored. The address is set with CommandOrData.
Public propertyAddressedDriverCountFeedback Property to indicate total number of addressed drivers present in the NV driver table.

This property will trigger ZumDaliControllerChange event with AddressedDriverCountFeedbackEventId.

Public propertyAddressedDriverMaskFeedback Property to indicate bitmask of the addressed driver present in DALI controller.

This property will trigger ZumDaliControllerChange event with AddressedDriverMaskFeedbackEventId.

Public propertyAddressingOperation Property to indicate operation addressing.
Public propertyAddressingOperationFeedback Property to indicate addressing operation.

This property will trigger ZumDaliControllerChange event with AddressingOperationFeedbackEventId.

Public propertyCommandOrData Property to set command/data.The command portion (byte 2) of the 2-byte DALI control/query command or special command. The address is sent with Address on execution.The high-order byte of the address value is ignored
Public propertyDaliBroadcastEnabledFeedback Property to indicate, if the dali broadcast is enabled.

This property will trigger ZumDaliControllerChange event with DaliBroadcastEnabledEventId.

Public propertyDaliBusErrorFeedback Property to indicate dali bus error.

This property will trigger ZumDaliControllerChange event with DaliBusErrorEventId.

Public propertyDaliModeFeedback Property to indicate dali mode. Valid value range is 0 to 3.

This property will trigger ZumDaliControllerChange event with DaliModeFeedbackEventId.

Public propertyData Property to set data.The command portion (byte 3) of the 3-byte DALI control/query or special command. The command is set with the Address.
Public propertyDiagnosticsStageOneStatusFeedback Property to indicate diagnostic stage one status.

This property will trigger ZumDaliControllerChange event with DiagnosticsStageOneStatusFeedbackEventId.

Public propertyDiagnosticStageFeedback Property to indicate different stages in driver diagnostics.The stages range from 1 to 3.

This property will trigger ZumDaliControllerChange event with DiagnosticStageFeedbackEventId.

Public propertyDriverInfoReadAllRequestCompleteFeedback Property to indicate all driver information has sent. This will be sent with a delay of 500ms after the final driver info has sent.

This property will trigger ZumDaliControllerChange event with DriverInfoReadAllRequestCompleteEventId.

Public propertyErrorCodeFeedback Property to indicate error code.

This property will trigger ZumDaliControllerChange event with ErrorCodeFeedbackEventId.

Public propertyEstimatedCompletionFeedback Property to indicate the estimated addressing progress between 0 to 100.

This property will trigger ZumDaliControllerChange event with EstimatedCompletionFeedbackEventId.

Public propertyFailedDriverCountFeedback Property to indicate the number of drivers that DALI has in its table that have an error.

This property will trigger ZumDaliControllerChange event with FailedDriverCountFeedbackEventId.

Public propertyGroupRequestCompleteFeedback Property to indicate both primary and secondary group value sent.

This property will trigger ZumDaliControllerChange event with GroupRequestCompletedEventId.

Public propertyLoopGroupQuerySettingRate Defines how often the group setting in a driver should be checked and updated if blank.This is to account for certain vendor drivers that do not retain Group information in non volatile Memory. This is to ensure that when driver power cycles, we refresh what its Group setting should be. valid range is 0 to 3. Default value is 0(30s). 1 = 60s; 2= 300s; 3=600s
Public propertyLoopGroupQuerySettingRateFeedback Property to indicate rate of group setting in a driver.

This property will trigger ZumDaliControllerChange event with LoopGroupQuerySettingRateFeedbackEventId.

Public propertyLoopQueryStatusPollRate Property to set drivers poll rate for status. Disable polling = 0; 100ms = 1.Value is in 100ms increments. Valid range is 0 to 10. Default polling value is 1.
Public propertyLoopQueryStatusPollRateFeedback Property to indicate poll rate for loop query status.

This property will trigger ZumDaliControllerChange event with LoopQueryStatusPollRateFeedbackEventId.

Public propertyLoopRampIdleRefreshRate Property to set group arc level while a fade is NOT taking place.This is to ensure that any drivers that power up receive correct level to go to. Valid value range is 0 to 3. Default value is 0. 1 = 10s; 2= 20s; 3=30s
Public propertyLoopRampIdleRefreshRateFeedback Property to indicate group arc level while a fade is NOT taking place.

This property will trigger ZumDaliControllerChange event with LoopRampIdleRefreshRateFeedbackEventId.

Public propertyLoopRampLevelRefreshRate Property to define to set a group arc level while a fade is taking place. Value is in 100ms increments. Valid value range is 0 to 10.Default value is 0. 0 =50ms, 1 = 100ms,2 = 150ms....10(Max value) = 1000ms(1 sec).
Public propertyLoopRampLevelRefreshRateFeedback Property to indicate group arc level while a fade is taking place.

This property will trigger ZumDaliControllerChange event with LoopRampLevelRefreshRateFeedbackEventId.

Public propertyMissingDriverCountFeedback Property to indicate total number of missing drivers. The drivers which has either corrupt poll counter or missed poll counter.

This property will trigger ZumDaliControllerChange event with MissingDriverCountFeedbackEventId.

Public propertyNoResponseFeedback Property to indicate no valid response received for 2 byte or 3 byte raw command.

This property will trigger ZumDaliControllerChange event with NoResponseFeedbackEventId.

Public propertyParent The parent that a ZumDaliController object was added to.
Public propertyPassedDriverCountFeedback Property to indicate number of drivers that DALI has in its table that have no errors.

This property will trigger ZumDaliControllerChange event with PassedDriverCountFeedbackEventId.

Public propertyPrimaryGroupFeedback Property to indicate primary group feedback.

This property will trigger ZumDaliControllerChange event with PrimaryGroupFeedbackEventId.

Public propertyRequestPrimaryGroup Property to set request primary group.
Public propertyResponseFeedback Property to indicate response for 2 byte or 3 byte raw command.

This property will trigger ZumDaliControllerChange event with ResponseFeedbackEventId.

Public propertyResponseValidFeedback Property to indicate valid response received for 2 byte or 3 byte raw command.

This property will trigger ZumDaliControllerChange event with ResponseValidEventId.

Public propertyTxDelay Property to define an additional delay on top of the minimum time between any DALI frame and an Outbound (forward) frame from DALI JBOX. DALI spec calls for a minimum of 10ms from the end of one frame (forward or reverse) and start of next frame. Since we have seen drivers struggle with high data rates we will add a longer delay. Minimum delay will be 20ms + Additional Delay.Additional Delay will be in increments of 10ms. 0 = 10ms;1 = 10ms ;10 = 100ms
Public propertyTxDelayFeedback Property to indicate additional delay on top of the minimum time between any DALI frame and an Outbound (forward) frame from DALI JBOX.

This property will trigger ZumDaliControllerChange event with TxDelayFeedbackEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Top
Methods
 NameDescription
Public methodAddGroup This method will get the available group.
Public methodClearAllMissingDrivers This method will clear the driver information of all missing drivers in the driver table present in non volatile.
Public methodDisableDaliBroadcast Method to disable dali broadcast.
Public methodDriverInfoReadAll This method will read all driver information.
Public methodEnableDaliBroadcast Method to enable dali broadcast.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodExecute2Byte Method to start 2 Byte raw command execution.
Public methodExecute3Byte Method to start 3 Byte raw command execution.
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodStartDiagnostics This method will start diagnostics.
Public methodStopDiagnostics This method will stop diagnostics.
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Top
Events
 NameDescription
Public eventZumDaliControllerChange Event triggered when a feedback has changed for this ZumDaliController.
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also