Satellite |
public class SatelliteBase : TunerBase
The SatelliteBase type exposes the following members.
| Name | Description | |
|---|---|---|
| SatelliteBase | Constructor to generate a new Satellite base class. |
| Name | Description | |
|---|---|---|
| ActiveChannelArtistFeedback | The current artist. | |
| ActiveChannelCategoryFeedback | The category of the current station. | |
| ActiveChannelNameFeedback | The channel name of the current station. | |
| ActiveChannelNumberFeedback | The current channel number. | |
| ActiveChannelSongFeedback | The current song title. | |
| CategoryModeOffFeedback | Indicates that category mode is turned off. | |
| CategoryModeOnFeedback | Indicates that the tuner is currently in category mode. | |
| ChannelFeedback |
The current channel or frequency.
(Inherited from TunerBase) | |
| CurrentChannelSkippedFeedback | Indicates that the current channel is skipped in the channel list. | |
| DiagnosticModeOffFeedback | Turns off diagnostic mode. | |
| DiagnosticModeOnFeedback | Indicates that diagnostic mode is enabled. | |
| DiagnosticsFeedback | When in diagnostic mode this output string reports diagnostic messages 1 through 9. | |
| GuideInfoFeedback | The current program guide or focus list information, including category, artist and song title. The string is updated at the rate defined by GuideRptRate. | |
| ISOConvOff | Turns off ISO conversion. | |
| MuteOffFeedback |
Indicates that audio is active (not muted).
(Inherited from TunerBase) | |
| MuteOnFeedback |
Indicates that AM/FM audio is muted.
(Inherited from TunerBase) | |
| PowerOffFeedback | Indicates that tuner power is off. | |
| PowerOnFeedback | Indicates that tuner power is on. | |
| PowerUpBusyFeedback | Indicates that the tuner is currently powering up. | |
| PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| PresetModeFeedback |
Reports the current preset mode.
(Inherited from TunerBase) | |
| RepeaterSignalFeedback | When signal strength reporting is enabled reports the strength of the ground repeater signal. | |
| SatelliteSignalFeedback | When signal strength reporting is enabled reports the strength of the satellite signal. | |
| SignalStrengthFeedback |
When signal strength reporting is enabled reports the signal strength.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| StationMinus |
Tunes to the previous station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StationPlus |
Tunes to the next station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds, the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StatusFeedback | The lower 10 bits of the analog value indicate diagnostic information reported by the tuner module. Note that the bit fields have no additional processing. They report exactly what the tuner module reports. Composite signal strength Bit 0: 1 = No signal Bit 1: 1 = Weak signal Bit 2: 1 = Moderate signal Bit 3: 1 = Strong signal Error messages Bit 4: 1 = No Antenna: This bit reports the status of antenna detection only and does not depend on the audio status. In contrast, the "Antenna Disconnected" advisory message on the ActiveChannelNameFeedback is only displayed when the antenna is disconnected AND there is a corresponding loss of audio. Bit 5: 1 = Audio NOT OK (also reported on the ActChanName output) Bit 6: 1 = Health NOT OK Bit 7: 1 = GCI changing (also reported on the ActChanName output) Bit 8: 1 = NOT primary module Bit 9: 1 = Data services changing Bit 10 through Bit 15: Unused | |
| TuningBusyFeedback | Indicates that the tuner is busy tuning to a station. | |
| UTCDayFeedback | The UTC day of the month. | |
| UTCHourFeedback | The UTC hour of the day. | |
| UTCMinuteFeedback | The UTC minutes reading. | |
| UTCMonthFeedback | The UTC month of the year. | |
| UTCSecondFeedback | The UTC seconds reading. | |
| UTCYearFeedback | The UTC reading for the current year. |
| Name | Description | |
|---|---|---|
| CategoryMinus | When in category mode browses to the previous category. | |
| CategoryModeOff | Exits category mode. | |
| CategoryModeOn | Puts the tuner into category mode. | |
| CategoryPlus | When in category mode browses to the next category. | |
| DiagnosticModeOff | Turns off diagnostic mode. | |
| DiagnosticModeOn | Enables diagnostic mode. | |
| DiagnosticScrollDown | When in diagnostic mode this input scrolls down through the list of diagnostic messages. | |
| DiagnosticScrollUp | When in diagnostic mode this input scrolls up through the list of diagnostic messages. | |
| DisableGuide | Disables the GuideInfo and UpdatingGuide outputs. | |
| EnableGuide | Enables the GuideInfo output to report Program Guide information. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetTime | Retrieves the current time and date information. | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MuteOff |
Unmutes audio to the currently active band (FM or AM).
(Inherited from TunerBase) | |
| MuteOn |
Mutes audio to the currently active band (FM or AM).
(Inherited from TunerBase) | |
| OnTunerChange |
Method to fire the TunerChange event.
(Inherited from TunerBase) | |
| PowerOff | Turns off power to the tuner. | |
| PowerOn | Turns on power to the tuner. | |
| Preset |
Saves, recalls, or clears the preset number passed in depending on the state of the PresetMode input.
Valid presets are 1 - 20.
(Inherited from TunerBase) | |
| RemoveSkipCurrentChannel | Restores the current skipped channel (selected via direct entry or preset) to the channel list. | |
| SignalStrengthDisable |
Disables the SignalStrengthFeedback output from reporting the FM signal strength.
This input does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SignalStrengthEnable |
Enables the SignalStrengthFeedback output to report the FM signal strength.
This input does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SkipCurrentChannel | Skips the current channel in the channel list to prevent it from being accessible in search mode. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| _CategoryMinus | When in category mode browses to the previous category. | |
| _CategoryModeOff | Exits category mode. | |
| _CategoryModeOn | Puts the tuner into category mode. | |
| _CategoryPlus | When in category mode browses to the next category. | |
| _DiagnosticModeOff | Turns off diagnostic mode. | |
| _DiagnosticModeOn | Enables diagnostic mode. | |
| _DiagnosticScrollMinus | When in diagnostic mode this input scrolls down through the list of diagnostic messages. | |
| _DiagnosticScrollPlus | When in diagnostic mode this input scrolls up through the list of diagnostic messages. | |
| _DisableGuide | Disables the GuideInfo feedback and UpdatingGuide feedback. | |
| _EnableGuide | Enables the GuideInfo feedback to report Program Guide information and the UpdatingGuide feedback to report when the guide information is refreshing. | |
| _GetTime | Retrieves the current time and date information from the satellite. | |
| _MuteOff |
Restores (un-mutes) audio.
(Inherited from TunerBase) | |
| _MuteOn |
Mutes Sirius audio.
(Inherited from TunerBase) | |
| _PowerOff | Turns off power to the tuner. | |
| _PowerOn | Turns on power to the tuner. | |
| _PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| _PresetModeFeedback |
Indicates the current preset mode.
(Inherited from TunerBase) | |
| _RemoveSkipCurrentChan | Restores the current skipped channel (selected via direct entry or preset) to the channel list. | |
| _RepeaterSignalFeedback | When signal strength reporting is enabled reports the strength of the ground repeater signal. | |
| _SatelliteSignalFeedback | When signal strength reporting is enabled reports the strength of the satellite signal. | |
| _SignalStrengthDisable |
Disables signal strength reporting on the RepeatSignal and SatelliteSignal feedbacks.
(Inherited from TunerBase) | |
| _SignalStrengthEnable |
Enables signal strength reporting on the RepeatSignal and SatelliteSignal feedbacks.
(Inherited from TunerBase) | |
| _SkipCurrentChan | Skips the current channel in the channel list to prevent it from being accessible in search mode (channel +/- or category +/-). | |
| PresetChannel |
Collection of presets.
(Inherited from TunerBase) | |
| PresetChannelFeedback |
Collection of preset channel frequencies.
(Inherited from TunerBase) | |
| PresetChannelNameFeedback | Collection of preset channel names. | |
| PresetChannelNumberFeedback | Collection of preset channel number. | |
| Type |
Indicates the source type.
(Inherited from TunerBase) |