SatelliteBaseStatusFeedback Property |
The lower 10 bits of the analog value indicate diagnostic information reported by the tuner module.
Note that the bit fields have no additional processing. They report exactly what the tuner module reports.
Composite signal strength
Bit 0: 1 = No signal
Bit 1: 1 = Weak signal
Bit 2: 1 = Moderate signal
Bit 3: 1 = Strong signal
Error messages
Bit 4: 1 = No Antenna: This bit reports the status of antenna detection only and does not depend on the audio status. In contrast, the "Antenna Disconnected" advisory message on the ActiveChannelNameFeedback is only displayed when the antenna is disconnected AND there is a corresponding loss of audio.
Bit 5: 1 = Audio NOT OK (also reported on the ActChanName output)
Bit 6: 1 = Health NOT OK
Bit 7: 1 = GCI changing (also reported on the ActChanName output)
Bit 8: 1 = NOT primary module
Bit 9: 1 = Data services changing
Bit 10 through Bit 15: Unused
Namespace: Crestron.SimplSharpPro.MediaAssembly: Crestron.SimplSharpPro.Media (in Crestron.SimplSharpPro.Media.dll) Version: 2.21.121
Syntaxpublic UShortOutputSig StatusFeedback { get; protected set; }Property Value
UShortOutputSigVersion Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also