Satellite |
The SatelliteBase type exposes the following members.
| Name | Description | |
|---|---|---|
| ActiveChannelArtistFeedback | The current artist. | |
| ActiveChannelCategoryFeedback | The category of the current station. | |
| ActiveChannelNameFeedback | The channel name of the current station. | |
| ActiveChannelNumberFeedback | The current channel number. | |
| ActiveChannelSongFeedback | The current song title. | |
| CategoryModeOffFeedback | Indicates that category mode is turned off. | |
| CategoryModeOnFeedback | Indicates that the tuner is currently in category mode. | |
| ChannelFeedback |
The current channel or frequency.
(Inherited from TunerBase) | |
| CurrentChannelSkippedFeedback | Indicates that the current channel is skipped in the channel list. | |
| DiagnosticModeOffFeedback | Turns off diagnostic mode. | |
| DiagnosticModeOnFeedback | Indicates that diagnostic mode is enabled. | |
| DiagnosticsFeedback | When in diagnostic mode this output string reports diagnostic messages 1 through 9. | |
| GuideInfoFeedback | The current program guide or focus list information, including category, artist and song title. The string is updated at the rate defined by GuideRptRate. | |
| ISOConvOff | Turns off ISO conversion. | |
| MuteOffFeedback |
Indicates that audio is active (not muted).
(Inherited from TunerBase) | |
| MuteOnFeedback |
Indicates that AM/FM audio is muted.
(Inherited from TunerBase) | |
| PowerOffFeedback | Indicates that tuner power is off. | |
| PowerOnFeedback | Indicates that tuner power is on. | |
| PowerUpBusyFeedback | Indicates that the tuner is currently powering up. | |
| PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| PresetModeFeedback |
Reports the current preset mode.
(Inherited from TunerBase) | |
| RepeaterSignalFeedback | When signal strength reporting is enabled reports the strength of the ground repeater signal. | |
| SatelliteSignalFeedback | When signal strength reporting is enabled reports the strength of the satellite signal. | |
| SignalStrengthFeedback |
When signal strength reporting is enabled reports the signal strength.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| StationMinus |
Tunes to the previous station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StationPlus |
Tunes to the next station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds, the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StatusFeedback | The lower 10 bits of the analog value indicate diagnostic information reported by the tuner module. Note that the bit fields have no additional processing. They report exactly what the tuner module reports. Composite signal strength Bit 0: 1 = No signal Bit 1: 1 = Weak signal Bit 2: 1 = Moderate signal Bit 3: 1 = Strong signal Error messages Bit 4: 1 = No Antenna: This bit reports the status of antenna detection only and does not depend on the audio status. In contrast, the "Antenna Disconnected" advisory message on the ActiveChannelNameFeedback is only displayed when the antenna is disconnected AND there is a corresponding loss of audio. Bit 5: 1 = Audio NOT OK (also reported on the ActChanName output) Bit 6: 1 = Health NOT OK Bit 7: 1 = GCI changing (also reported on the ActChanName output) Bit 8: 1 = NOT primary module Bit 9: 1 = Data services changing Bit 10 through Bit 15: Unused | |
| TuningBusyFeedback | Indicates that the tuner is busy tuning to a station. | |
| UTCDayFeedback | The UTC day of the month. | |
| UTCHourFeedback | The UTC hour of the day. | |
| UTCMinuteFeedback | The UTC minutes reading. | |
| UTCMonthFeedback | The UTC month of the year. | |
| UTCSecondFeedback | The UTC seconds reading. | |
| UTCYearFeedback | The UTC reading for the current year. |