Sirius Class |
public sealed class Sirius : SatelliteBase, ICenTrackSource
The Sirius type exposes the following members.
| Name | Description | |
|---|---|---|
| ActiveChannelArtistFeedback |
The current artist.
(Inherited from SatelliteBase) | |
| ActiveChannelCategoryFeedback |
The category of the current station.
(Inherited from SatelliteBase) | |
| ActiveChannelComposerFeedback | The composer of the current track, if available. | |
| ActiveChannelNameFeedback |
The channel name of the current station.
(Inherited from SatelliteBase) | |
| ActiveChannelNumberFeedback |
The current channel number.
(Inherited from SatelliteBase) | |
| ActiveChannelSongFeedback |
The current song title.
(Inherited from SatelliteBase) | |
| CategoryModeOffFeedback |
Indicates that category mode is turned off.
(Inherited from SatelliteBase) | |
| CategoryModeOnFeedback |
Indicates that the tuner is currently in category mode.
(Inherited from SatelliteBase) | |
| ChannelFeedback |
The current channel or frequency.
(Inherited from TunerBase) | |
| CurrentChannelLockedFeedback | Indicates that the currently tuned channel is locked. | |
| CurrentChannelSkippedFeedback |
Indicates that the current channel is skipped in the channel list.
(Inherited from SatelliteBase) | |
| DiagnosticModeOffFeedback |
Turns off diagnostic mode.
(Inherited from SatelliteBase) | |
| DiagnosticModeOnFeedback |
Indicates that diagnostic mode is enabled.
(Inherited from SatelliteBase) | |
| DiagnosticsFeedback |
When in diagnostic mode this output string reports diagnostic messages 1 through 9.
(Inherited from SatelliteBase) | |
| DisplayLongCategoryNames | Enables the display of long category names (maximum 16 characters) on the ActiveChannelCategoryFeedback output. | |
| DisplayLongChannelNames | Enables the display of long channel names. | |
| DSTOn | Enables adjustment for Daylight Savings Time. | |
| GuideInfoFeedback |
The current program guide or focus list information, including category,
artist and song title. The string is updated at the rate defined by GuideRptRate.
(Inherited from SatelliteBase) | |
| ISOConvOff |
Turns off ISO conversion.
(Inherited from SatelliteBase) | |
| MuteOffFeedback |
Indicates that audio is active (not muted).
(Inherited from TunerBase) | |
| MuteOnFeedback |
Indicates that AM/FM audio is muted.
(Inherited from TunerBase) | |
| Number | The number of this source on the Cen-Track. | |
| PINEntry | The PIN entered by the user to unlock and tune to the current (locked) channel. This value will be parsed by the device and must match SetPIN. | |
| PinInUseFeedback | Reports the current PIN that the tuner is using for tuning to locked channels. | |
| PinRequiredFeedback | Indicates that the currently requested channel requires a PIN number to be entered in order to tune to that station. | |
| PowerOffFeedback |
Indicates that tuner power is off.
(Inherited from SatelliteBase) | |
| PowerOnFeedback |
Indicates that tuner power is on.
(Inherited from SatelliteBase) | |
| PowerUpBusyFeedback |
Indicates that the tuner is currently powering up.
(Inherited from SatelliteBase) | |
| PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| PresetModeFeedback |
Reports the current preset mode.
(Inherited from TunerBase) | |
| ProtectedChannelRequest | Tunes to the specified channel (whether skipped, locked or un-subscribed) and screens for a valid PIN if the channel has the parental lockout attribute set. Valid values range from 0d to 223d. Channels outside of this range will be ignored. 0d corresponding to Station 0, which displays the ID number of the tuner module which will be required to activate the Satellite Radio service. | |
| RepeaterSignalFeedback |
When signal strength reporting is enabled reports the strength of the ground repeater signal.
(Inherited from SatelliteBase) | |
| ReportLockedInGuide | Enables channels in the guide list to be reported on the GuideInfoFeedback serial output even if the channel attribute is set to locked. | |
| SatelliteSignalFeedback |
When signal strength reporting is enabled reports the strength of the satellite signal.
(Inherited from SatelliteBase) | |
| SetPIN | Sets the PIN required to tune to locked channels. This signifies that the PIN specified by PINEntry must match SetPIN. Valid values range from 1d to 65536d. A value of 0d is ignored. The default PIN number is 1234d. | |
| SignalStrengthDisableFeedback | Indicates that signal strength reporting is disabled. | |
| SignalStrengthEnableFeedback | Indicates that signal strength reporting is enabled. | |
| SignalStrengthFeedback |
When signal strength reporting is enabled reports the signal strength.
This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SourceName | Source name string that will be displayed on the CEN-TRACK front panel, which identifies the corresponding tuner source. | |
| SourceNameFeedback | The currently defined source name string. | |
| StationMinus |
Tunes to the previous station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StationPlus |
Tunes to the next station frequency on a pulse. If the input remains set to true for
longer than 300 milliseconds, the tuner will auto repeat until
the input is set to false or after 500 repeats.
(Inherited from TunerBase) | |
| StatusFeedback |
The lower 10 bits of the analog value indicate diagnostic information reported by the tuner module.
Note that the bit fields have no additional processing. They report exactly what the tuner module reports.
Composite signal strength
Bit 0: 1 = No signal
Bit 1: 1 = Weak signal
Bit 2: 1 = Moderate signal
Bit 3: 1 = Strong signal
Error messages
Bit 4: 1 = No Antenna: This bit reports the status of antenna detection only and does not depend on the audio status. In contrast, the "Antenna Disconnected" advisory message on the ActiveChannelNameFeedback is only displayed when the antenna is disconnected AND there is a corresponding loss of audio.
Bit 5: 1 = Audio NOT OK (also reported on the ActChanName output)
Bit 6: 1 = Health NOT OK
Bit 7: 1 = GCI changing (also reported on the ActChanName output)
Bit 8: 1 = NOT primary module
Bit 9: 1 = Data services changing
Bit 10 through Bit 15: Unused
(Inherited from SatelliteBase) | |
| TuningBusyFeedback |
Indicates that the tuner is busy tuning to a station.
(Inherited from SatelliteBase) | |
| UnprotectedChannelRequest | Tunes to the specified station number (whether skipped, locked or un-subscribed) but DOES NOT block access if the channel is locked. Valid analog values range from 0d to 223d. Channels outside of this range will be ignored. | |
| UpdatingGuideFeedback | Indicates that the GuideInfoFeedback is being updated. | |
| UTCDayFeedback |
The UTC day of the month.
(Inherited from SatelliteBase) | |
| UTCHourFeedback |
The UTC hour of the day.
(Inherited from SatelliteBase) | |
| UTCMinuteFeedback |
The UTC minutes reading.
(Inherited from SatelliteBase) | |
| UTCMonthFeedback |
The UTC month of the year.
(Inherited from SatelliteBase) | |
| UTCSecondFeedback |
The UTC seconds reading.
(Inherited from SatelliteBase) | |
| UTCYearFeedback |
The UTC reading for the current year.
(Inherited from SatelliteBase) |
| Name | Description | |
|---|---|---|
| CategoryMinus |
When in category mode browses to the previous category.
(Inherited from SatelliteBase) | |
| CategoryModeOff |
Exits category mode.
(Inherited from SatelliteBase) | |
| CategoryModeOn |
Puts the tuner into category mode.
(Inherited from SatelliteBase) | |
| CategoryPlus |
When in category mode browses to the next category.
(Inherited from SatelliteBase) | |
| DiagnosticModeOff |
Turns off diagnostic mode.
(Inherited from SatelliteBase) | |
| DiagnosticModeOn |
Enables diagnostic mode.
(Inherited from SatelliteBase) | |
| DiagnosticScrollDown |
When in diagnostic mode this input scrolls down through the list of diagnostic messages.
(Inherited from SatelliteBase) | |
| DiagnosticScrollUp |
When in diagnostic mode this input scrolls up through the list of diagnostic messages.
(Inherited from SatelliteBase) | |
| DisableGuide |
Disables the GuideInfo and UpdatingGuide outputs.
(Inherited from SatelliteBase) | |
| EnableGuide |
Enables the GuideInfo output to report Program Guide information.
(Inherited from SatelliteBase) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetTime |
Retrieves the current time and date information.
(Inherited from SatelliteBase) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LockCurrentChannel | Turns on parental lockout for the currently tuned channel. | |
| MuteOff |
Unmutes audio to the currently active band (FM or AM).
(Inherited from TunerBase) | |
| MuteOn |
Mutes audio to the currently active band (FM or AM).
(Inherited from TunerBase) | |
| OnTunerChange |
Method to fire the TunerChange event.
(Inherited from TunerBase) | |
| PowerOff |
Turns off power to the tuner.
(Inherited from SatelliteBase) | |
| PowerOn |
Turns on power to the tuner.
(Inherited from SatelliteBase) | |
| Preset |
Saves, recalls, or clears the preset number passed in depending on the state of the PresetMode input.
Valid presets are 1 - 20.
(Inherited from TunerBase) | |
| RemoveSkipCurrentChannel |
Restores the current skipped channel (selected via direct entry or preset) to the channel list.
(Inherited from SatelliteBase) | |
| RestoreDefaultPin | Restores the default PIN (1234d) for tuning to locked channels. | |
| SignalStrengthDisable |
Disables the SignalStrengthFeedback output from reporting the FM signal strength.
This input does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SignalStrengthEnable |
Enables the SignalStrengthFeedback output to report the FM signal strength.
This input does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase) | |
| SkipCurrentChannel |
Skips the current channel in the channel list to prevent it from being accessible in search mode.
(Inherited from SatelliteBase) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) | |
| UnlockCurrentChannel | Unlocks the currently tuned channel. |
| Name | Description | |
|---|---|---|
| TunerChange | When a tuner feedback has changed this event will fire. EventIds for this event are located in the TunerEventIds class. |
| Name | Description | |
|---|---|---|
| _CategoryMinus |
When in category mode browses to the previous category.
(Inherited from SatelliteBase) | |
| _CategoryModeOff |
Exits category mode.
(Inherited from SatelliteBase) | |
| _CategoryModeOn |
Puts the tuner into category mode.
(Inherited from SatelliteBase) | |
| _CategoryPlus |
When in category mode browses to the next category.
(Inherited from SatelliteBase) | |
| _DiagnosticModeOff |
Turns off diagnostic mode.
(Inherited from SatelliteBase) | |
| _DiagnosticModeOn |
Enables diagnostic mode.
(Inherited from SatelliteBase) | |
| _DiagnosticScrollMinus |
When in diagnostic mode this input scrolls down through the list of diagnostic messages.
(Inherited from SatelliteBase) | |
| _DiagnosticScrollPlus |
When in diagnostic mode this input scrolls up through the list of diagnostic messages.
(Inherited from SatelliteBase) | |
| _DisableGuide |
Disables the GuideInfo feedback and UpdatingGuide feedback.
(Inherited from SatelliteBase) | |
| _EnableGuide |
Enables the GuideInfo feedback to report Program Guide information and the UpdatingGuide feedback to report when the guide information is refreshing.
(Inherited from SatelliteBase) | |
| _GetTime |
Retrieves the current time and date information from the satellite.
(Inherited from SatelliteBase) | |
| _MuteOff |
Restores (un-mutes) audio.
(Inherited from TunerBase) | |
| _MuteOn |
Mutes Sirius audio.
(Inherited from TunerBase) | |
| _PowerOff |
Turns off power to the tuner.
(Inherited from SatelliteBase) | |
| _PowerOn |
Turns on power to the tuner.
(Inherited from SatelliteBase) | |
| _PresetMode |
Sets the preset mode.
(Inherited from TunerBase) | |
| _PresetModeFeedback |
Indicates the current preset mode.
(Inherited from TunerBase) | |
| _RemoveSkipCurrentChan |
Restores the current skipped channel (selected via direct entry or preset) to the channel list.
(Inherited from SatelliteBase) | |
| _RepeaterSignalFeedback |
When signal strength reporting is enabled reports the strength of the ground repeater signal.
(Inherited from SatelliteBase) | |
| _SatelliteSignalFeedback |
When signal strength reporting is enabled reports the strength of the satellite signal.
(Inherited from SatelliteBase) | |
| _SignalStrengthDisable |
Disables signal strength reporting on the RepeatSignal and SatelliteSignal feedbacks.
(Inherited from TunerBase) | |
| _SignalStrengthEnable |
Enables signal strength reporting on the RepeatSignal and SatelliteSignal feedbacks.
(Inherited from TunerBase) | |
| _SkipCurrentChan |
Skips the current channel in the channel list to prevent it from being accessible in search mode (channel +/- or category +/-).
(Inherited from SatelliteBase) | |
| BrowseContexts | The browse contexts that can be used to browse this source. | |
| CenTrackAddedTo | CenTrack that source is added to. | |
| PresetChannel |
Collection of presets.
(Inherited from TunerBase) | |
| PresetChannelFeedback |
Collection of preset channel frequencies.
(Inherited from TunerBase) | |
| PresetChannelNameFeedback |
Collection of preset channel names.
(Inherited from SatelliteBase) | |
| PresetChannelNumberFeedback |
Collection of preset channel number.
(Inherited from SatelliteBase) | |
| Type |
Indicates the source type.
(Inherited from TunerBase) |