Click or drag to resize

GlsOdtCCn Properties

The GlsOdtCCn type exposes the following members.

Properties
 NameDescription
Public propertyAndWhenVacated Property to trigger both PIR AND US motion sensors to detect motion to declare initial occupancy, if the room is vacant.
Public propertyAndWhenVacatedFeedback Property to indicate if both PIR AND US sensor technologies must register motion to trigger initial room occupancy.

The GlsOccupancySensorChange event will trigger with AndWhenVacatedFeedbackEventId.

Public propertyCommandReceivedFeedbackSigs Property to return a collection of Sigs each corresponding to an command number. Each BoolOutputSig is toggled when the IR receiver hears the corresponding command number.

The GlsOccupancySensorChange event will trigger with CommandReceivedFeedbackEventId.

This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCurrentTimeoutFeedback Property to indicate which timeout being used by the sensor.

The BaseEvent event will trigger with TimeoutFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyDecrementPirSensitivityInOccupiedState Property to decrease PIR sensitivity while sensor is in occupied state by 1.
(Inherited from GlsOccupancySensorBase)
Public propertyDecrementPirSensitivityInVacantState Property to decrease the PIR sensitivity while sensor is in vacant state by 1.
(Inherited from GlsOccupancySensorBase)
Public propertyDecrementUsSensitivityInOccupiedState Property to decrease US sensitivity while sensor is in occupied state by 1.
Public propertyDecrementUsSensitivityInVacantState Property to decrease US sensitivity while sensor is in vacant state by 1.
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisableLedFlash Property to disable the red feedback LED from blinking when motion is detected.
(Inherited from GlsOccupancySensorBase)
Public propertyDisablePir Property to disable the PIR Sensor.
(Inherited from GlsOccupancySensorBase)
Public propertyDisableShortTimeout Property to disable the short timeout functionality.
(Inherited from GlsOccupancySensorBase)
Public propertyDisableUsA Property to disable the US Sensor side A. This does NOT enable side B.
Public propertyDisableUsB Property to disable the US Sensor side B. This does not enable side A.
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableLedFlash Property to enable the red feedback LEDs.
(Inherited from GlsOccupancySensorBase)
Public propertyEnablePir Property to enable the PIR Sensor.
(Inherited from GlsOccupancySensorBase)
Public propertyEnableRawStates Property to enable RawOccupancyFeedback property.
(Inherited from GlsOccupancySensorBase)
Public propertyEnableShortTimeout Property to enable a “walk-through” mode for a shorter timeouts upon periods of minimal occupancy.
(Inherited from GlsOccupancySensorBase)
Public propertyEnableToReceiveIrOutputs Property to enable the IR outputs. This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase)
Public propertyEnableUsA Property to enables the US Sensor side A. Does NOT disable side B.
Public propertyEnableUsB Property to enable the US Sensor side B. This does NOT disable side A.
Public propertyExternalPhotoSensorMinimumChange Property to set the minimum change in lux that the external Photosensor must see before reporting a new value. This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase)
Public propertyExternalPhotoSensorValueFeedback Property to report the external photosensor value.

The BaseEvent event will trigger with ExternalPhotoSensorValueFeedbackEventId.

This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase)
Public propertyForceOccupied Property to force the device to report that the room is occupied even if the infrared sensor does not detect motion.
(Inherited from GlsOccupancySensorBase)
Public propertyForceVacant Property to force the sensor into the state of vacancy.
(Inherited from GlsOccupancySensorBase)
Public propertyGraceOccupancyDetectedFeedback Property to indicate occupancy event detected within 15s of initial vacancy event.

The BaseEvent event will trigger with GraceOccupancyDetectedFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIncrementPirSensitivityInOccupiedState Property to increase the PIR sensitivity while sensor is in occupied state by 1.
(Inherited from GlsOccupancySensorBase)
Public propertyIncrementPirSensitivityInVacantState Property to increase the PIR sensitivity while sensor is in vacant state by 1.
(Inherited from GlsOccupancySensorBase)
Public propertyIncrementUsSensitivityInOccupiedState Property to increase the US sensitivity while sensor is in occupied state by 1.
Public propertyIncrementUsSensitivityInVacantState Property to increase the US sensitivity while sensor is in vacant state by 1.
Public propertyInternalPhotoSensorMinimumChange Property to set the minimum change in value that the internal Photosensor must sense before reporting a new value.
(Inherited from GlsOccupancySensorBase)
Public propertyInternalPhotoSensorValueFeedback Property to report the internal photosensor value.

The BaseEvent event will trigger with InternalPhotoSensorValueFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLedFlashEnabledFeedback Property to indicate if feedback LED is enabled or disabled.

The GlsOccupancySensorChange event will trigger with LedFlashEnabledFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyLocalTimeoutFeedback Property to report the timeout set from the IR remote.

The BaseEvent event will trigger with TimeoutLocalFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyOccupancyDetectedFeedback Property to indicate when the room is occupied.

The BaseEvent event will trigger with RoomOccupiedFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyOrWhenVacated Property to trigger either passive infrared (PIR) OR ultrasonic (US) motion sensors to declare initial occupancy and set the sensor to the occupied state, if the room is vacant.
Public propertyOrWhenVacatedFeedback Property to indicate if either PIR OR US sensor technologies can trigger initial occupancy.

The GlsOccupancySensorChange event will trigger with OrWhenVacatedFeedbackEventId.

Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPassiveInfraredSensorEnabledFeedback Property to report if the PIR Sensor is enabled.

The GlsOccupancySensorChange event will trigger with PirEnabledFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyPirEnabledFeedback Property to report if the PIR Sensor is enabled.

The GlsOccupancySensorChange event will trigger with PirEnabledFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyPirSensitivityInOccupiedStateFeedback Property to report Sensitivity level for PIR while sensor is in occupied state.

The GlsOccupancySensorChange event will trigger with PirSensitivityInOccupiedStateFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyPirSensitivityInVacantStateFeedback Property to report Sensitivity level for PIR while sensor is in vacant state.

The GlsOccupancySensorChange event will trigger with PirSensitivityInVacantStateFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyRawOccupancyFeedback Property to return the current occupancy status.

The BaseEvent event will trigger with RawOccupancyFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Public propertyRawOccupancyPirFeedback Property to indicate if any raw motion registered/detected by the PIR sensor.

The BaseEvent event will trigger with RawOccupancyPirFeedbackEventId.

Public propertyRawOccupancyUsFeedback Property to indicate if any raw motion registered/detected by the US sensor.

The BaseEvent event will trigger with RawOccupancyUsFeedbackEventId.

Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRemoteTimeout Property to set a dynamic timeout.
(Inherited from GlsOccupancySensorBase)
Public propertyShortTimeoutEnabledFeedback Property to report if the short timeout functionality has been enabled.

The GlsOccupancySensorChange event will trigger with ShortTimeoutEnabledFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySystemAddressReceivedFeedback Property to return the system address heard by the IR receiver.

The GlsOccupancySensorChange event will trigger with SystemAddressReceivedFeedbackEventId.

This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUsAEnabledFeedback Property to report if the US Sensor side A is enabled.

The GlsOccupancySensorChange event will trigger with UsAEnabledFeedbackEventId.

Public propertyUsBEnabledFeedback Property to report if the US Sensor side B is enabled.

The GlsOccupancySensorChange event will trigger with UsBEnabledFeedbackEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyUsSensitivityInOccupiedStateFeedback Property to report the Sensitivity level for US while sensor is in occupied state.

The GlsOccupancySensorChange event will trigger with UsSensitivityInOccupiedStateFeedbackEventId.

Public propertyUsSensitivityInVacantStateFeedback Property to report Sensitivity level for US while sensor is in vacant state.

The GlsOccupancySensorChange event will trigger with UsSensitivityInVacantStateFeedbackEventId.

Public propertyVacancyDetectedFeedback Property to indicate when the room is vacant.

The BaseEvent event will trigger with RoomVacantFeedbackEventId.


(Inherited from GlsOccupancySensorBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also