Click or drag to resize

Crestron.SimplSharpPro.GeneralIO Namespace

 
Classes
 ClassDescription
Public classAxxess Axxess family device class for ADA/PIC devices.
Public classAxxessADA Axxess ADA object class. This class will trigger BaseEvent
Public classAxxessBase Axxess family of devices base class for CCMD/GRM/HCM/HCMCM devices.
Public classAxxessCCMD Axxess Communication and Control Module Digital device object class. This class will trigger BaseEvent
Public classAxxessGRM Axxess group room management device object class. This class will trigger BaseEvent
Public classAxxessHCM Axxess hallway chime module device object class. This class will trigger BaseEvent
Public classAxxessHCMCM Axxess hallway chime monitor ceiling mount device object class. This class will trigger BaseEvent
Public classAxxessPIC Axxess plug in chime device object class. This device does not remember the state of the Doorbell disabled state across reboots and must be triggered eveytime. This class will trigger BaseEvent
Public classC2nIo The C2N-IO is a compact Cresnet control module that adds control ports to any Crestron 2-Series or 3-Series control system.

This device does not support ComPort extended information events.

Public classC2nRths A Cresnet based temperature and humidity sensor.
Public classCode exampleCaenBlockCenCn2Poe Crestron device that provides two independent cresnet control branches.
Public classCenIoCom Base class for CEN-IO-COM-102.
Public classCode exampleCenIoCom102 Crestron external standalone serial COM card that provides RS-232 control interfaces for video displays, AV components, small applications, and other equipment. It includes two separate bidirectional RS-232 ports and communicates with the control system network via Ethernet.
Public classCode exampleCenIoCom202 Crestron external standalone serial COM card that provides RS-232 control interfaces for video displays, AV components, small applications, and other equipment. It includes two separate bidirectional RS-232 ports and communicates with the control system network via WiFi.
Public classCenIoDi Base class for CEN-IO-DI-104.
Public classCode exampleCenIoDi104 Crestron external standalone Digital inputs card that provides digital input control interfaces for remote devices such as garage door openers, sensors, and motorized screens. It includes four digital input ports and communicates with the control system network via Ethernet.
Public classCode exampleCenIoDi204 Crestron external standalone Digital inputs card that provides digital input control interfaces for remote devices such as garage door openers, sensors, and motorized screens. It includes four digital input ports and communicates with the control system network via WiFi.
Public classCenIoIr Base class for CEN-IO-IR-104.
Public classCode exampleCenIoIr104 Crestron external standalone IR Outputs card that provides IR remote control interfaces for video displays, AV components, small applications, and other equipment. It includes four discrete IR ports and communicates with the control system network via Ethernet.
Public classCode exampleCenIoIr204 Crestron external standalone IR Outputs card that provides IR remote control interfaces for video displays, AV components, small applications, and other equipment. It includes four discrete IR ports and communicates with the control system network via WiFi.
Public classCenIoRy Base class for CEN-IO-RY-104.
Public classCode exampleCenIoRy104 Crestron external standalone Relays card that provides low-voltage relay control interfaces for remote devices such as garage door openers, sensors, and motorized screens. It includes four isolated relays and communicates with the control system network via Ethernet.
Public classCode exampleCenIoRy204 Crestron external standalone Relays card that provides low-voltage relay control interfaces for remote devices such as garage door openers, sensors, and motorized screens. It includes four isolated relays and communicates with the control system network via WiFi.
Public classCode exampleCenOdtCPoe Ethernet-based dual technology sensor that uses passive infrared and ultrasonic technologies to detect occupancy.

This class will trigger BaseEvent and CenOccupancySensorChange events.

Public classCode exampleCsaPws10sHub Power Supply with Cresnet interface that powers up to 10 Crestron Quiet Motor Technology roller shade or drapery system motors and features a built-in, 5-segment Cresnet hub with network diagnostics capabilities.

This class will trigger BaseEvent and BranchStateChange events.

Public classCode exampleCsaPws10sHubEnet Crestron device that provides two independent Cresnet control branches (local and master) as well as 5 separate power segments with 2 separate cresnet connectors on each segment that can be independently controlled. Valid Cresnet ID's for the master branch (branch 1) are 03 through 4F. Valid Cresnet ID's for the Local branch (branch 2) are 03 through 0C.
Public classCsaPws10sHubEnetBase This base class is used for the CsaPws10sHubEnet and CsaPws10sHubEnetSlave. The CsaPws10sHubEnet is the an ethernet device, and the CsaPws10sHubEnetSlave is a device that can be dropped onto Cresnet or master/local branch of the CsaPws10sHubEnet.
Public classCsaPws10sHubEnetSegment Class containing information for each of the individual segments A-E (1-5) for the CsaPws10sHubEnet and CsaPws10sHubEnetSlave devices.

This class will trigger SegmentStateChange event.

Public classCsaPws10sHubEnetSegmentStateEventArgs Event arguments class used for CsaPws10sHubEnetSegmentStateChangeEventHandler.
Public classCode exampleCsaPws10sHubEnetSlave Crestron device that provides 5 separate power segment with 2 separate Cresnet connectors on each segment that can be independently controlled. All devices plugged into this shade hub exist in the same Cresnet address space of the device it is attached to (for example, if this is on the main cresnet of an RMC3, you can access ID 03 through FE, excluding the Cresnet ID assigned to the hub itself.
Public classCsaPws10sHubEventIds Class to define the valid EventIds for the BaseEvent and SegmentStateChange events.
Public classCode exampleDinCenCn2 Crestron device that provides two independent cresnet control branches.
Public classCode exampleDinCenCn2Poe Crestron device that provides two independent cresnet control branches.
Public classDinIo8 Cresnet based device providing eight Versiports, programmable as digital inputs, digital outputs or analog outputs. Each Versiport has a corresponding pull-up resistor
Public classFt2aCblr1t FT2A-CBLR-1T is a retractable cable management solution for Crestron® FT2 Series FlipTops™ which allows each cable to be pulled out smoothly for use, and then retracted gently into its enclosure.

This class will trigger ButtonStateChange and BaseEvent events.

Public classGlsLcct Crestron SolarSync Outdoor Daylight and Color Temperature Sensor. It measures true color temperature and intensity of natural sunlight or any other lighting source.

This class will trigger BaseEvent.

Public classGlsLdlExBatt Battery-powered, dual-loop wireless photo sensor designed for daylight harvesting applications to control the balance of natural and artificial lighting in an indoor space. Dual-loop sensing is achieved on the device by two internal photocells—one for open-loop daylight sensing and one for closed-loop ambient light sensing.
Public classGlsOccupancySensorBase Base class for GLS Occupancy Sensors.

This class will trigger BaseEvent and GlsOccupancySensorChange events.

Public classGlsOccupancySensorChangeEventArgs Event Argument class used for GlsOccupancySensorChangeEventHandler.
Public classGlsOdtCCn Cresnet-based dual technology sensor that uses passive infrared and ultrasonic technologies to detect occupancy.
Public classCode exampleGlsOirCCn Cresnet-based passive infrared (PIR) occupancy sensor.

This class will trigger BaseEvent and GlsOccupancySensorChange event.

Public classGlsOirCsmExBatt infiNET EX battery-powered occupancy sensor that uses passive infra-red to detect occupancy.

This class will trigger BaseEvent event with event IDs from GlsOirCsmExBattEventIds.

Public classGlsOirCsmExBattEventIds Event Ids used on the GlsOirCsmExBatt that will trigger the BaseEvent event.
Public classCode exampleGlsOirLclCCn Cresnet-based passive infrared (PIR) occupancy sensor without the external ambient light level.

This class will trigger BaseEvent and GlsOccupancySensorChangeevent.

Public classGlsPartCn A Cresnet based partition sensor that uses a reflected IR beam to detect the presence of a partition wall. The sensor is powered from the 24V Cresnet bus and has the ability to adjust the detection distance of the wall partition.
Public classGlsSim Cresnet based compact interface device designed to allow Crestron Green Light sensors to be connected directly to a Cresnet control network, with 2 Versiports.
Public classInetIoexIrcom Compact infiNET EX Wireless IR/RS-232 control interface
Public classInetIoexRyio Compact infiNET EX Wireless Relay/Digital Input control interface
Public classCode exampleInetsIoexDoorBatt Battery operated compact infiNET EX Wireless door sensor.

This class will trigger BaseEvent event.

Public classIoexComOverflowControls Extender used to detect COM overflow conditions of the IOEX.
Public classShadePowerSupplyBranch Power Supply Hub ShadePowerSupplyBranch class

This class will trigger BranchStateChange event.

Public classShadePowerSupplyBranchStateEventArgs Event arguments class used for ShadePowerSupplyBranchStateChangeEventHandler.
Public classCode exampleStatusSign LED back lit room sign that can be controlled via Cresnet.

This class will trigger BaseEvent event.

Public classStatusSignLed LED Class for StatusSign LED Control sigs.

This class will trigger BaseEvent events.

Public classCode exampleStCom The ST-COM provides two COM ports for controlling serial devices over RS-232, RS-424, or RS-485. This device has to receive string and CTS as feedbacks.
Public classCode exampleStIo The ST-IO provides eight isolated relays for controlling low voltage contact closure devices such as drapes, screens and lifts. It also provides four local digital inputs. The feedbacks for relay ports are simulated.
Interfaces
 InterfaceDescription
Public interfaceICommonOccupancySensorInfo Interface to describe the common Occupancy Sensor Info for GlsOccupancySensorBase, GlsOirCsmExBatt and GlppBase.
Public interfaceIGlsCenOcc Interface to define the common sigs between GLS and CEN-ODT-C-POE Occupancy Sensors.
Public interfaceIGlsOccupancySensorsCommonSigs Interface to describe the common sigs for GLS Occupancy Sensors. GlsOccupancySensorBase or GlsOirCsmExBatt.
Delegates
 DelegateDescription
Public delegateCsaPws10sHubEnetSegmentStateChangeEventHandler Delegate to define the event handler for changes individual hub segments.
Public delegateGlsOccupancySensorChangeEventHandler Delegate definition for GlsOccupancySensorChange event.
Public delegateShadePowerSupplyBranchStateChangeEventHandler Delegate to define the event handler for changes to the power supply hub branch.
Enumerations
 EnumerationDescription
Public enumerationeCsaPws10sHubEnetPowerSupplyErrorStatus Enum which defines the values of the PowerSupplyErrorStatusFeedback property on the CsaPws10sHubEnet and CsaPws10sHubEnetSlave devices.
Public enumerationeCsaPws10sHubEnetSegmentStatus Enum to define the status on the segments on the CsaPws10sHubEnet and CsaPws10sHubEnetSlave devices. The enum represents bitfields that can be tested for. For example, if Y and Z are both shorted to ground the value returned will be 0x0022.
Public enumerationeCsaPws10sHubEnetStatus Enum which defines the values of the HubStatusFeedback property on the CsaPws10sHubEnet and CsaPws10sHubEnetSlave devices
Public enumerationeGlsDataRefreshRate Enum to define the data refresh rates.
Public enumerationeSensitivityLevel Enum to define the Sensitivity levels for ultrasonic (US) and passive infrared (PIR) while sensor is in occupied or vacant states.
Public enumerationGlsLccteColorSpaceOutputType Enum to define the Color Space Output Types
Public enumerationGlsLccteLuxScaledRange Enum to define the Lux Scaled Ranges
Public enumerationStatusSignLedeBrightnessPercentageValues Enum to define valid Brightness Percentage values.
Public enumerationStatusSignLedeLedColor Enum to define the LED colors for StatusSign.