Gls |
public sealed class GlsOdtCCn : GlsOccupancySensorBase
The GlsOdtCCn type exposes the following members.
| Name | Description | |
|---|---|---|
| GlsOdtCCn(UInt32, CrestronControlSystem) | Constructor to generate a new GLS-ODT-C-CN Occupancy Sensor that resides on the cresnet bus for the specified control system. | |
| GlsOdtCCn(UInt32, IDeviceBranch) | Constructor to generate a new GLS-ODT-C-CN Occupancy Sensor that resides on the cresnet bus of a IDeviceBranch. |
| Name | Description | |
|---|---|---|
| AndWhenVacated | Property to trigger both PIR AND US motion sensors to detect motion to declare initial occupancy, if the room is vacant. | |
| AndWhenVacatedFeedback |
Property to indicate if both PIR AND US sensor technologies must register motion to trigger initial room occupancy.
The GlsOccupancySensorChange event will trigger with AndWhenVacatedFeedbackEventId. | |
| CommandReceivedFeedbackSigs |
Property to return a collection of Sigs each corresponding to an command number. Each BoolOutputSig is toggled when the IR receiver hears the corresponding command number.
The GlsOccupancySensorChange event will trigger with CommandReceivedFeedbackEventId. This property is not supported by "GlsOirLclCCn" device.(Inherited from GlsOccupancySensorBase) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| CurrentTimeoutFeedback |
Property to indicate which timeout being used by the sensor.
The BaseEvent event will trigger with TimeoutFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| DecrementPirSensitivityInOccupiedState |
Property to decrease PIR sensitivity while sensor is in occupied state by 1.
(Inherited from GlsOccupancySensorBase) | |
| DecrementPirSensitivityInVacantState |
Property to decrease the PIR sensitivity while sensor is in vacant state by 1.
(Inherited from GlsOccupancySensorBase) | |
| DecrementUsSensitivityInOccupiedState | Property to decrease US sensitivity while sensor is in occupied state by 1. | |
| DecrementUsSensitivityInVacantState | Property to decrease US sensitivity while sensor is in vacant state by 1. | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisableLedFlash |
Property to disable the red feedback LED from blinking when motion is detected.
(Inherited from GlsOccupancySensorBase) | |
| DisablePir |
Property to disable the PIR Sensor.
(Inherited from GlsOccupancySensorBase) | |
| DisableShortTimeout |
Property to disable the short timeout functionality.
(Inherited from GlsOccupancySensorBase) | |
| DisableUsA | Property to disable the US Sensor side A. This does NOT enable side B. | |
| DisableUsB | Property to disable the US Sensor side B. This does not enable side A. | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| EnableLedFlash |
Property to enable the red feedback LEDs.
(Inherited from GlsOccupancySensorBase) | |
| EnablePir |
Property to enable the PIR Sensor.
(Inherited from GlsOccupancySensorBase) | |
| EnableRawStates |
Property to enable RawOccupancyFeedback property.
(Inherited from GlsOccupancySensorBase) | |
| EnableShortTimeout |
Property to enable a “walk-through” mode for a shorter timeouts upon periods of minimal occupancy.
(Inherited from GlsOccupancySensorBase) | |
| EnableToReceiveIrOutputs |
Property to enable the IR outputs.
This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase) | |
| EnableUsA | Property to enables the US Sensor side A. Does NOT disable side B. | |
| EnableUsB | Property to enable the US Sensor side B. This does NOT disable side A. | |
| ExternalPhotoSensorMinimumChange |
Property to set the minimum change in lux that the external Photosensor must see before reporting a new value.
This property is not supported by "GlsOirLclCCn" device.
(Inherited from GlsOccupancySensorBase) | |
| ExternalPhotoSensorValueFeedback |
Property to report the external photosensor value.
The BaseEvent event will trigger with ExternalPhotoSensorValueFeedbackEventId. This property is not supported by "GlsOirLclCCn" device.(Inherited from GlsOccupancySensorBase) | |
| ForceOccupied |
Property to force the device to report that the room is occupied even if the infrared sensor does not detect motion.
(Inherited from GlsOccupancySensorBase) | |
| ForceVacant |
Property to force the sensor into the state of vacancy.
(Inherited from GlsOccupancySensorBase) | |
| GraceOccupancyDetectedFeedback |
Property to indicate occupancy event detected within 15s of initial vacancy event.
The BaseEvent event will trigger with GraceOccupancyDetectedFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IncrementPirSensitivityInOccupiedState |
Property to increase the PIR sensitivity while sensor is in occupied state by 1.
(Inherited from GlsOccupancySensorBase) | |
| IncrementPirSensitivityInVacantState |
Property to increase the PIR sensitivity while sensor is in vacant state by 1.
(Inherited from GlsOccupancySensorBase) | |
| IncrementUsSensitivityInOccupiedState | Property to increase the US sensitivity while sensor is in occupied state by 1. | |
| IncrementUsSensitivityInVacantState | Property to increase the US sensitivity while sensor is in vacant state by 1. | |
| InternalPhotoSensorMinimumChange |
Property to set the minimum change in value that the internal Photosensor must sense before reporting a new value.
(Inherited from GlsOccupancySensorBase) | |
| InternalPhotoSensorValueFeedback |
Property to report the internal photosensor value.
The BaseEvent event will trigger with InternalPhotoSensorValueFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LedFlashEnabledFeedback |
Property to indicate if feedback LED is enabled or disabled.
The GlsOccupancySensorChange event will trigger with LedFlashEnabledFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| LocalTimeoutFeedback |
Property to report the timeout set from the IR remote.
The BaseEvent event will trigger with TimeoutLocalFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| OccupancyDetectedFeedback |
Property to indicate when the room is occupied.
The BaseEvent event will trigger with RoomOccupiedFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| OrWhenVacated | Property to trigger either passive infrared (PIR) OR ultrasonic (US) motion sensors to declare initial occupancy and set the sensor to the occupied state, if the room is vacant. | |
| OrWhenVacatedFeedback |
Property to indicate if either PIR OR US sensor technologies can trigger initial occupancy.
The GlsOccupancySensorChange event will trigger with OrWhenVacatedFeedbackEventId. | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PassiveInfraredSensorEnabledFeedback |
Property to report if the PIR Sensor is enabled.
The GlsOccupancySensorChange event will trigger with PirEnabledFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| PirEnabledFeedback |
Property to report if the PIR Sensor is enabled.
The GlsOccupancySensorChange event will trigger with PirEnabledFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| PirSensitivityInOccupiedStateFeedback |
Property to report Sensitivity level for PIR while sensor is in occupied state.
The GlsOccupancySensorChange event will trigger with PirSensitivityInOccupiedStateFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| PirSensitivityInVacantStateFeedback |
Property to report Sensitivity level for PIR while sensor is in vacant state.
The GlsOccupancySensorChange event will trigger with PirSensitivityInVacantStateFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| RawOccupancyFeedback |
Property to return the current occupancy status.
The BaseEvent event will trigger with RawOccupancyFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| RawOccupancyPirFeedback |
Property to indicate if any raw motion registered/detected by the PIR sensor.
The BaseEvent event will trigger with RawOccupancyPirFeedbackEventId. | |
| RawOccupancyUsFeedback |
Property to indicate if any raw motion registered/detected by the US sensor.
The BaseEvent event will trigger with RawOccupancyUsFeedbackEventId. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| RemoteTimeout |
Property to set a dynamic timeout.
(Inherited from GlsOccupancySensorBase) | |
| ShortTimeoutEnabledFeedback |
Property to report if the short timeout functionality has been enabled.
The GlsOccupancySensorChange event will trigger with ShortTimeoutEnabledFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SystemAddressReceivedFeedback |
Property to return the system address heard by the IR receiver.
The GlsOccupancySensorChange event will trigger with SystemAddressReceivedFeedbackEventId. This property is not supported by "GlsOirLclCCn" device.(Inherited from GlsOccupancySensorBase) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UsAEnabledFeedback |
Property to report if the US Sensor side A is enabled.
The GlsOccupancySensorChange event will trigger with UsAEnabledFeedbackEventId. | |
| UsBEnabledFeedback |
Property to report if the US Sensor side B is enabled.
The GlsOccupancySensorChange event will trigger with UsBEnabledFeedbackEventId. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| UsSensitivityInOccupiedStateFeedback |
Property to report the Sensitivity level for US while sensor is in occupied state.
The GlsOccupancySensorChange event will trigger with UsSensitivityInOccupiedStateFeedbackEventId. | |
| UsSensitivityInVacantStateFeedback |
Property to report Sensitivity level for US while sensor is in vacant state.
The GlsOccupancySensorChange event will trigger with UsSensitivityInVacantStateFeedbackEventId. | |
| VacancyDetectedFeedback |
Property to indicate when the room is vacant.
The BaseEvent event will trigger with RoomVacantFeedbackEventId. (Inherited from GlsOccupancySensorBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| GlsOccupancySensorChange |
Event triggered when the GLS Cresnet Occupancy Sensor reports information to the Control System.
Valid event IDs are available in GlsOccupancySensorBase (Inherited from GlsOccupancySensorBase) | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) |