eCsaPws10sHubEnetSegmentStatus Enumeration |
Enum to define the status on the segments on the
CsaPws10sHubEnet and
CsaPws10sHubEnetSlave devices. The enum represents
bitfields that can be tested for. For example, if Y and Z are both shorted to ground the value returned will be 0x0022.
Namespace: Crestron.SimplSharpPro.GeneralIOAssembly: Crestron.SimplSharpPro.GeneralIO (in Crestron.SimplSharpPro.GeneralIO.dll) Version: 2.21.121
Syntax[FlagsAttribute]
public enum eCsaPws10sHubEnetSegmentStatus
Members| Member name | Value | Description |
|---|
| YZGood | 0 |
Y and Z lines are good.
|
| YShortTo24 | 1 |
Y line is shorted to 24.
|
| YShortToGround | 2 |
Y line is shorted to ground.
|
| YBrokenLine | 4 |
Y line is not connected.
|
| ZShortTo24 | 16 |
Z line is shorted to 24.
|
| ZShortToGround | 32 |
Z line is shorted to ground.
|
| ZBrokenLine | 64 |
Z line is not connected.
|
| YShortToZ | 256 |
Y line is shorted with Z line.
|
| YCrossedWithZ | 512 |
Y and Z lines are connected switched.
|
| YZUnbalanced | 1,024 |
The differential between the Y and Z lines is not consistent
|
| RecentPowerFault | 2,048 |
A power fault was recently detected.
|
| NoDevicesFound | 4,096 |
No devices were found as a result of running a segment test.
|
Version Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also