Click or drag to resize

DmNvxBaseClassDmNvx35xSecondaryAudioeSecondaryAudioMode Enumeration

Enum to define the Secondary Audio Modes.

Namespace: Crestron.SimplSharpPro.DM.Streaming
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public enum eSecondaryAudioMode
Members
Member nameValueDescription
Automatic0 Automatic Mode In transmitter mode, sends the secondary audio stream to a multicast address 1 greater than the primary stream. For example, if the address is 239.1.2.3 for the primary, the secondary stream should be at 1.2.4. All controls on this slot are ignored when in this mode except for AudioSource. In receiver mode, the goal of this mode is to provide the highest quality audio that is available in the audio path. If AudioSource = PrimaryStreamAudio. If the receiver does not have a DSP and the primary stream has multichannel audio, sends the multichannel audio to the HDMI output, Attempts to connect to the secondary audio channel on +1 the multicast address. If the receiver device has a DSP, Selects the AudioSource, and uses the DSP to downmix the audio for the analog audio connector. If AudioSource = SecondaryStreamAudio, attempts to connect to the secondary stream. All controls on this slot are ignored except for AudioSource. For DM-NVX-D80-IOAV only: The goal of this mode is to provide the highest quality audio that is available in the audio path If Top.AudioSource = Primary If the receiver has a DSP: Select the primary audio stream, and use the DSP to downmix the audio for the analog audio connector. If the receiver does not have a DSP: If the audio in the primary stream is multichannel Send the multichannel audio to the HDMI output Attempt to connect to a secondary audio channel on +1 the multicast address If the audio stream is found, decode it and send it to the analog output. Otherwise mute the analog output. If Top.AudioSource = Secondary, attempt to connect to the secondary stream. All controls on this slot are ignored except for AudioSource. If AudioSource = PrimaryStreamAudio. Selects the AudioSource, and uses the DSP to downmix the audio for the analog audio connector. If AudioSource = SecondaryStreamAudio, attempts to connect to the secondary stream. All controls on this slot are ignored except for AudioSource. For DM-NAX-ROUTING only: When in transmitter mode: Send the secondary audio stream to a multicast address 1 greater than the primary stream. For example, if the address is 239.1.2.3 for the primary, the secondary stream should be at 239.1.2.4. All controls on this slot are ignored when in this mode with the exception of the AudioSource property. When in receiver mode: The goal of this mode is to provide the highest quality audio that is available in the audio path. If Top.AudioSource = Primary If the receiver has a DSP: Select the primary audio stream, and use the DSP to downmix the audio for the analog audio connector. If the receiver does not have a DSP: If the audio in the primary stream is multichannel Send the multichannel audio to the HDMI output Attempt to connect to a secondard audio channel on +1 the multicast address If the audio stream is found, decode it and send it to the analog output. Otherwise mute the analog output. If Top.AudioSource = Secondary, attempt to connect to the secondary stream. All controls on DmNvxBaseClassDmNvx35xDmNaxRouting are ignored except for AudioSource.
Manual1 Manual Mode In transmitter mode, sends the secondary stream to the location specified on this slot. All controls on this slot are honored in this mode. In receiver mode, receives the secondary stream to the location specified on this slot. All controls on this slot are honored in this mode.
Disabled2 Disabled In transmitter mode, shall not send the stream. In receiver mode, shall not attempt to find a secondary stream.

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also