Click or drag to resize

DmNvxBaseClassDmNvx35xSecondaryAudio Class

Secondary Audio class for DM-NVX-35X(C) devices.

This class will trigger SecondaryAudioChange event.

Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.DM.StreamingDmNvxBaseClassDmNvx35xSecondaryAudio

Namespace: Crestron.SimplSharpPro.DM.Streaming
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public sealed class DmNvx35xSecondaryAudio : IParentInformation

The DmNvxBaseClassDmNvx35xSecondaryAudio type exposes the following members.

Properties
 NameDescription
Public propertyChannelsFeedback Property to report the number of channels in the audio stream.

The SecondaryAudioChange event will trigger with AudioChannelsEventId.

Public propertyDisableAutomaticInitiationFeedback Property to indicate the automatic initiation disabled status. 'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled.

The SecondaryAudioChange event will trigger with AutomaticInitiationDisabledEventId.

Public propertyElapsedSecondsFeedbackObsolete.
Property to indicate the time elapsed (in seconds) since streaming was started.

The SecondaryAudioChange event will trigger with ElapsedSecEventId.

Public propertyEnableAutomaticInitiationFeedback Property to indicate the automatic initiation enabled status. 'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled.

The SecondaryAudioChange event will trigger with AutomaticInitiationEnabledEventId.

Public propertyEncodingFormatFeedback Property to report the detected audio format.

The SecondaryAudioChange event will trigger with EncodingFormatFeedbackEventId.

Public propertyEncodingSampleRateFeedback Property to report the sample rate of the encoded audio in hectohertz (100s of hertz) Example: 44.1kHz = 441.

The SecondaryAudioChange event will trigger with EncodingSampleRateFeedbackEventId.

Public propertyMulticastAddress Property to set the multicast address.
Public propertyMulticastAddressFeedback Property to return the Address of the device connected to the device.

The SecondaryAudioChange event will trigger with MulticastAddressEventId.

Public propertyName Property to set the name.
Public propertyNameFeedback Property to return the Name of the device connected to the device.

The SecondaryAudioChange event will trigger with NameEventId.

Public propertyParent The parent that a DmNvxBaseClassDmNvx35xSecondaryAudio object was added to.
Public propertyPauseFeedback Property to indicate that the stream is paused. This property value becomes true as soon as the "pause" function is active.

The SecondaryAudioChange event will trigger with PauseEventId.

Public propertyProcessingFeedback Property to indicate that the device is changing state (starting the stream, stopping the stream, etc) and is busy. Please wait until this property value is 'false' before sending commands to the device. true = device is busy; false = device is not busy This property also becomes 'true' when EnableAutomaticInitiation is called to indicate that the device is attempting to start a new stream.

The SecondaryAudioChange event will trigger with ProcessingEventId.

Public propertyReceiveChannelsFeedback Property to report the number of channels in the audio stream.

The SecondaryAudioChange event will trigger with ReceiveAudioChannelsEventId.

Public propertyReceiveDisableAutomaticInitiationFeedback Property to indicate the automatic initiation disabled status. 'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled.

The SecondaryAudioChange event will trigger with ReceiveAutomaticInitiationDisabledEventId.

Public propertyReceiveEnableAutomaticInitiationFeedback Property to indicate the automatic initiation enabled status. 'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled.

The SecondaryAudioChange event will trigger with ReceiveAutomaticInitiationEnabledEventId.

Public propertyReceiveEncodingFormatFeedback Property to report the detected audio format.

The SecondaryAudioChange event will trigger with ReceiveEncodingFormatFeedbackEventId.

Public propertyReceiveEncodingSampleRateFeedback Property to report the sample rate of the encoded audio in hectohertz (100s of hertz) Example: 44.1kHz = 441.

The SecondaryAudioChange event will trigger with ReceiveEncodingSampleRateFeedbackEventId.

Public propertyReceiveMulticastAddress Property to set the multicast address.
Public propertyReceiveMulticastAddressFeedback Property to return the Address of the device connected to the device.

The SecondaryAudioChange event will trigger with ReceiveMulticastAddressEventId.

Public propertyReceiveName Property to set the name.
Public propertyReceiveNameFeedback Property to return the Name of the device connected to the device.

The SecondaryAudioChange event will trigger with ReceiveNameEventId.

Public propertyReceiveProcessingFeedback Property to indicate that the device is changing state (starting the stream, stopping the stream, etc) and is busy. Please wait until this property value is 'false' before sending commands to the device. true = device is busy; false = device is not busy This property also becomes 'true' when ReceiveEnableAutomaticInitiation is called to indicate that the device is attempting to start a new stream.

The SecondaryAudioChange event will trigger with ReceiveProcessingEventId.

Public propertyReceiveSecondaryAudioMode Property to set how the secondary audio stream behaves. Value passed for secondary audio mode is not defined in the enum DmNvxBaseClassDmNvx35xSecondaryAudioeSecondaryAudioMode.
Public propertyReceiveSecondaryAudioModeFeedback Property to report the current secondary audio stream behavior.

The SecondaryAudioChange event will trigger with ReceiveSecondaryAudioModeFeedbackEventId.

Public propertyReceiveStartFeedback Property to indicate if receive streaming has started. This property value becomes true once the device has started decoding the stream.

The SecondaryAudioChange event will trigger with ReceiveStartEventId.

Public propertyReceiveStatusFeedback Property to report the status of the device.

The SecondaryAudioChange event will trigger with ReceiveStatusEventId.

Public propertyReceiveStopFeedback Property to indicate the stream stopped status. This property value becomes true after the stream has been torn down.

The SecondaryAudioChange event will trigger with ReceiveStopEventId.

Public propertyReceiveStreamBitrateFeedback Property to report the current stream bitrate in kbps.

The SecondaryAudioChange event will trigger with ReceiveStreamBitrateEventId.

Public propertyReceiveTsPort Property to set the port on which the audio stream is being transmitted.
Public propertyReceiveTsPortFeedback Property to report the port on which the audio stream is being transmitted.

The SecondaryAudioChange event will trigger with ReceiveTsPortEventId.

Public propertySecondaryAudioMode Property to set how the secondary audio stream behaves. Value passed for secondary audio mode is not defined in the enum DmNvxBaseClassDmNvx35xSecondaryAudioeSecondaryAudioMode.
Public propertySecondaryAudioModeFeedback Property to report the current secondary audio stream behavior.

The SecondaryAudioChange event will trigger with SecondaryAudioModeFeedbackEventId.

Public propertyStartFeedback Property to indicate if streaming has started. This property value becomes true once the device has started decoding the stream.

The SecondaryAudioChange event will trigger with StartEventId.

Public propertyStatusFeedback Property to report the status of the device.

The SecondaryAudioChange event will trigger with StatusEventId.

Public propertyStopFeedback Property to indicate the stream stopped status. This property value becomes true after the stream has been torn down.

The SecondaryAudioChange event will trigger with StopEventId.

Public propertyStreamBitrateFeedback Property to report the current stream bitrate in kbps.

The SecondaryAudioChange event will trigger with StreamBitrateEventId.

Public propertyTsPort Property to set the port on which the audio stream is being transmitted.
Public propertyTsPortFeedback Property to report the port on which the audio stream is being transmitted.

The SecondaryAudioChange event will trigger with TsPortEventId.

Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Top
Methods
 NameDescription
Public methodDisableAutomaticInitiation Method to disable the automatic initiation. Waits for the "Start" property to become true before attempting to start a stream.
Public methodEnableAutomaticInitiation Method to enable the automatic initiation. Enabled by default. The device will try to connect whenever the following properties are changed. 1. MulticastAddress 2. TsPort
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodPause Method to pause the stream.
Public methodReceiveDisableAutomaticInitiation Method to disable the automatic initiation. Waits for the "Start" property to become true before attempting to start a stream.
Public methodReceiveEnableAutomaticInitiation Method to enable the automatic initiation. Enabled by default. The device will try to connect whenever the following properties are changed. 1. ReceiveMulticastAddress 2. ReceiveTsPort
Public methodReceiveStart Method to start the stream.
Public methodReceiveStop Method to stop the stream.
Public methodStart Method to start the stream.
Public methodStop Method to stop the stream.
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Top
Events
 NameDescription
Public eventSecondaryAudioChange Event triggered when a feedback has changed for this DmNvxBaseClassDmNvx35xSecondaryAudio.
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also