Dm |
The DmNvxBaseClassDmNvx35xSecondaryAudio type exposes the following members.
| Name | Description | |
|---|---|---|
| ChannelsFeedback |
Property to report the number of channels in the audio stream.
The SecondaryAudioChange event will trigger with AudioChannelsEventId. | |
| DisableAutomaticInitiationFeedback |
Property to indicate the automatic initiation disabled status.
'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled.
The SecondaryAudioChange event will trigger with AutomaticInitiationDisabledEventId. | |
| ElapsedSecondsFeedback | Obsolete. Property to indicate the time elapsed (in seconds) since streaming was started. The SecondaryAudioChange event will trigger with ElapsedSecEventId. | |
| EnableAutomaticInitiationFeedback |
Property to indicate the automatic initiation enabled status.
'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled.
The SecondaryAudioChange event will trigger with AutomaticInitiationEnabledEventId. | |
| EncodingFormatFeedback |
Property to report the detected audio format.
The SecondaryAudioChange event will trigger with EncodingFormatFeedbackEventId. | |
| EncodingSampleRateFeedback |
Property to report the sample rate of the encoded audio in hectohertz (100s of hertz) Example: 44.1kHz = 441.
The SecondaryAudioChange event will trigger with EncodingSampleRateFeedbackEventId. | |
| MulticastAddress | Property to set the multicast address. | |
| MulticastAddressFeedback |
Property to return the Address of the device connected to the device.
The SecondaryAudioChange event will trigger with MulticastAddressEventId. | |
| Name | Property to set the name. | |
| NameFeedback |
Property to return the Name of the device connected to the device.
The SecondaryAudioChange event will trigger with NameEventId. | |
| Parent | The parent that a DmNvxBaseClassDmNvx35xSecondaryAudio object was added to. | |
| PauseFeedback |
Property to indicate that the stream is paused.
This property value becomes true as soon as the "pause" function is active.
The SecondaryAudioChange event will trigger with PauseEventId. | |
| ProcessingFeedback |
Property to indicate that the device is changing state (starting the stream, stopping the stream, etc) and is busy.
Please wait until this property value is 'false' before sending commands to the device.
true = device is busy; false = device is not busy
This property also becomes 'true' when EnableAutomaticInitiation is called to indicate that the device is attempting to start a new stream.
The SecondaryAudioChange event will trigger with ProcessingEventId. | |
| ReceiveChannelsFeedback |
Property to report the number of channels in the audio stream.
The SecondaryAudioChange event will trigger with ReceiveAudioChannelsEventId. | |
| ReceiveDisableAutomaticInitiationFeedback |
Property to indicate the automatic initiation disabled status.
'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled.
The SecondaryAudioChange event will trigger with ReceiveAutomaticInitiationDisabledEventId. | |
| ReceiveEnableAutomaticInitiationFeedback |
Property to indicate the automatic initiation enabled status.
'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled.
The SecondaryAudioChange event will trigger with ReceiveAutomaticInitiationEnabledEventId. | |
| ReceiveEncodingFormatFeedback |
Property to report the detected audio format.
The SecondaryAudioChange event will trigger with ReceiveEncodingFormatFeedbackEventId. | |
| ReceiveEncodingSampleRateFeedback |
Property to report the sample rate of the encoded audio in hectohertz (100s of hertz) Example: 44.1kHz = 441.
The SecondaryAudioChange event will trigger with ReceiveEncodingSampleRateFeedbackEventId. | |
| ReceiveMulticastAddress | Property to set the multicast address. | |
| ReceiveMulticastAddressFeedback |
Property to return the Address of the device connected to the device.
The SecondaryAudioChange event will trigger with ReceiveMulticastAddressEventId. | |
| ReceiveName | Property to set the name. | |
| ReceiveNameFeedback |
Property to return the Name of the device connected to the device.
The SecondaryAudioChange event will trigger with ReceiveNameEventId. | |
| ReceiveProcessingFeedback |
Property to indicate that the device is changing state (starting the stream, stopping the stream, etc) and is busy.
Please wait until this property value is 'false' before sending commands to the device.
true = device is busy; false = device is not busy
This property also becomes 'true' when ReceiveEnableAutomaticInitiation is called to indicate that the device is attempting to start a new stream.
The SecondaryAudioChange event will trigger with ReceiveProcessingEventId. | |
| ReceiveSecondaryAudioMode | Property to set how the secondary audio stream behaves. Value passed for secondary audio mode is not defined in the enum DmNvxBaseClassDmNvx35xSecondaryAudioeSecondaryAudioMode. | |
| ReceiveSecondaryAudioModeFeedback |
Property to report the current secondary audio stream behavior.
The SecondaryAudioChange event will trigger with ReceiveSecondaryAudioModeFeedbackEventId. | |
| ReceiveStartFeedback |
Property to indicate if receive streaming has started.
This property value becomes true once the device has started decoding the stream.
The SecondaryAudioChange event will trigger with ReceiveStartEventId. | |
| ReceiveStatusFeedback |
Property to report the status of the device.
The SecondaryAudioChange event will trigger with ReceiveStatusEventId. | |
| ReceiveStopFeedback |
Property to indicate the stream stopped status.
This property value becomes true after the stream has been torn down.
The SecondaryAudioChange event will trigger with ReceiveStopEventId. | |
| ReceiveStreamBitrateFeedback |
Property to report the current stream bitrate in kbps.
The SecondaryAudioChange event will trigger with ReceiveStreamBitrateEventId. | |
| ReceiveTsPort | Property to set the port on which the audio stream is being transmitted. | |
| ReceiveTsPortFeedback |
Property to report the port on which the audio stream is being transmitted.
The SecondaryAudioChange event will trigger with ReceiveTsPortEventId. | |
| SecondaryAudioMode | Property to set how the secondary audio stream behaves. Value passed for secondary audio mode is not defined in the enum DmNvxBaseClassDmNvx35xSecondaryAudioeSecondaryAudioMode. | |
| SecondaryAudioModeFeedback |
Property to report the current secondary audio stream behavior.
The SecondaryAudioChange event will trigger with SecondaryAudioModeFeedbackEventId. | |
| StartFeedback |
Property to indicate if streaming has started.
This property value becomes true once the device has started decoding the stream.
The SecondaryAudioChange event will trigger with StartEventId. | |
| StatusFeedback |
Property to report the status of the device.
The SecondaryAudioChange event will trigger with StatusEventId. | |
| StopFeedback |
Property to indicate the stream stopped status.
This property value becomes true after the stream has been torn down.
The SecondaryAudioChange event will trigger with StopEventId. | |
| StreamBitrateFeedback |
Property to report the current stream bitrate in kbps.
The SecondaryAudioChange event will trigger with StreamBitrateEventId. | |
| TsPort | Property to set the port on which the audio stream is being transmitted. | |
| TsPortFeedback |
Property to report the port on which the audio stream is being transmitted.
The SecondaryAudioChange event will trigger with TsPortEventId. | |
| UserSpecifiedObject | Can be assigned anything that user wants. |