Click or drag to resize

DmNvxD200 Class

Smaller size and low-cost version of Standalone JPEG 2000 encoder box with no fan and with all the functionality of the DmNvx350 and DmNvx351 in encoder mode with the exception of the following: No video scaler No de-interlacer No USB routing No courtesy LAN port  No SFP option No text overlay No OSD for IP address verification No Thumbnail preview No multichannel to 2 channel audio down mix option No USB or Serial console port Limited video resolutions upto 1080p

This class will trigger BaseEvent, AttributeChange, ControlChange, CecChange, StreamChange, DeviceInformationChange, OverlayPropertiesChange, DmNaxRoutingChange and DmNaxStreamChange events.

Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.DM.Streaming
Assembly: Crestron.SimplSharpPro.DM (in Crestron.SimplSharpPro.DM.dll) Version: 2.21.121
Syntax
C#
public sealed class DmNvxD200 : DmNvxBaseClass

The DmNvxD200 type exposes the following members.

Constructors
 NameDescription
Public methodDmNvxD200(UInt32, CrestronControlSystem) Constructor for DmNvxD200 that uses Ethernet as interface.
Public methodDmNvxD200(UInt32, DmXioDirectorBaseDmXioDomain) Constructor for DmNvxD200 to add this device as a receiver endpoint to the DmXioDirector80/DmXioDirector160 or DmXioDirectorEnterprise Domain.
Top
Properties
 NameDescription
Public propertyAutomaticPowerSettings Automatic Power Setting present on this device

This property will trigger AutomaticPowerSettingChange with DMInputEventIds This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31", "DmNvxE31C", "DmNvxD10" "DmNvx352" and "DmNvxD20" devices.


(Inherited from Dm100xStrBase)
Public propertyComPorts Collection of serial COM ports on the device.
(Inherited from Dm100xStrBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyControl The Common Stream control.

This property will trigger BaseEvent event with DMInputEventIds.


(Inherited from DmNvxBaseClass)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from Dm100xStrBase)
Public propertyDmIn DM Input present on this device.

This property will trigger InputStreamChange with EndpointInputStreamEventIds and AttributeChange with VideoAttributeEventIds.


(Inherited from DmNvxBaseClass)
Public propertyDmNaxRouting DM NAX Routing present on this device.

This property will trigger DmNaxRoutingChange with DMInputEventIds.


(Inherited from DmNvxBaseClass)
Public propertyEndpointName This is a string property that is used to access the name of the endpoint.
(Inherited from Dm100xStrBase)
Public propertyHdmiIn HDMI Input present on this device.

This property will trigger StreamChange with DMInputEventIds, AttributeChange with VideoAttributeEventIds, and CecChange with CecEventIds.

This property is not supported by "DmNvxD30" and "DmNvxD30C".
(Inherited from DmNvxBaseClass)
Public propertyHdmiOut HDMI output present on this device

This property will trigger StreamChange with DMOutputEventIds, AttributeChange with VideoAttributeEventIds, DeviceInformationChange with ConnectedDeviceEventIds and CecChange with CecEventIds.

This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C".
(Inherited from Dm100xStrBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyImageProperties Image Overlay properties of this device. This property is not supported by "DmNvxBaseClass".

This property will trigger OverlayPropertiesChange with event IDs defined in DmRmc100Str.

This property is not supported by "DmNvxD30", "DmNvxD30C", "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from Dm100xStrBase)
Public propertyIROutputPorts Collection of IR output ports on the device.
(Inherited from Dm100xStrBase)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNetwork Network present on this device.

This property will trigger NetworkChange with DMInputEventIds.


(Inherited from DmNvxBaseClass)
Public propertyNumberOfComPorts Number of serial COM ports this device supports.
(Inherited from Dm100xStrBase)
Public propertyNumberOfIROutputPorts Number of IR output ports this device supports.
(Inherited from Dm100xStrBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPreviewImage Preview image on this device.

This property will trigger DmNvxPreviewImagePropertyChange with DMOutputEventIds.

Preview image is supported by DM-NVX-360,DM-NVX-360C, DM-NVX-363, DM-NVX-363C devices only.
(Inherited from DmNvxBaseClass)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySecondaryAudio Secondary Audio present on this device.

This property will trigger SecondaryAudioChange with DMInputEventIds.

If using firmware 3.x or above on the NVX, please refer to using DmNaxRouting.


(Inherited from DmNvxBaseClass)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySourceReceive Source Receive present on this device

This property will trigger StreamChange with DMInputEventIds and AttributeChange with VideoAttributeEventIds.

This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from Dm100xStrBase)
Public propertySourceTransmit Source Transmit present on this device.

This property will trigger StreamChange with DMOutputEventIds and AttributeChange with VideoAttributeEventIds.


(Inherited from DmNvxBaseClass)
Public propertyTestPatternGenerator

This property will trigger TestPatternGeneratorPropertyChange with DMOutputEventIds.

Test Pattern Generator is supported by DM-NVX-760c,DM-NVX-760,DM-NVX-E30,DM-NVX-E30C and DM-NVX-36x devices.
(Inherited from DmNvxBaseClass)
Public propertyTextProperties Text Overlay properties of this device

This property will trigger OverlayPropertiesChange with event IDs defined in DmRmc100Str.


(Inherited from Dm100xStrBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUsbInput USB Input present on this device.

This property will trigger UsbInputChange with DMInputEventIds.

USB Input is supported by DM-NVX-350,DM-NVX-351,DM-NVX-350C,DM-NVX-351C,DM-NVX-352 and DM-NVX-352C,DM-NVX-D80-IOAV only
(Inherited from DmNvxBaseClass)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Public propertyXioRouting XIO Routing present on this device.

This property will trigger XioRoutingChange with DMInputEventIds.


(Inherited from DmNvxBaseClass)
Top
Methods
 NameDescription
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from Dm100xStrBase)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventEndpointNameChange Event triggered when endpoint name changed for this endpoint on a DmXioDirectorBaseDmXioDomain.
(Inherited from Dm100xStrBase)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also