Humidity |
public sealed class HumidityThermostat
The HumidityThermostat type exposes the following members.
| Name | Description | |
|---|---|---|
| DehumidityCallFeedbacks | Returns a collection of components that indicate when the system is making a dehumidity call. | |
| DispHumidityModePage | Indicates that the Humidity Mode page has been enabled for display on the thermostat LCD. The output remains true for as long as the page is enabled. The Humidity Mode page allows the user to enable or disable the humidifier. | |
| DispHumidityViewPage | Indicates that the Humidity View page has been enabled for display on the thermostat LCD. The output remains true for as long as the page is enabled. The Humidity View Page displays the relative humidity and setpoint values. | |
| HumidifierEnable | Enables the humidifier. | |
| HumidifierEnableFeedback | Indicates that the humidifier is enabled. | |
| HumidifierMode | Sets the Humidifier mode. | |
| HumidifierModeFeedback | Reports the current Humidifier mode. | |
| HumidifierOff | Turns off the humidifier. | |
| HumidifierOffFeedback | Indicates that the humidifier is off. | |
| HumidityCallFeedbacks | Returns a collection of components that indicate when the system is making a humidity call. | |
| HumiditySetpoint | Sets the humidity regulating setpoint in whole numbers. Valid values range from 5 to 90. Out of range values are ignored. | |
| HumiditySetpointFeedback | Reports the humidity regulating setpoint. | |
| HumiditySetpointMinus | Lowers the humidity regulating setpoint. Continuing to assert the up or down inputs at the limits of the setpoint will not affect the setpoint. That is, the setpoint will hold at its maximum or minimum setting. | |
| HumiditySetpointPlus | Raises the humidity regulating setpoint. Continuing to assert the up or down inputs at the limits of the setpoint will not affect the setpoint. That is, the setpoint will hold at its maximum or minimum setting. | |
| IndoorHumidityInput | Receives the indoor relative humidity from a sensor that is not connected to the thermostat, for display on the Main page of the thermostat LCD (CHV-TSTAT only). This value is ignored if a humidity sensor (CHV-RTHS) is connected to the CHV-TSTAT. This property is not supported by HZ-THSTAT. | |
| LocalHumidity | Reports the relative humidity reading of the built-in humidity sensor (CHV-THSTAT only) in whole numbers. The internal humidity sensor reading is reported regardless of the Use or Omit designation. | |
| LocalHumInvalid | Indicates that the corresponding when remote humidity sensor isn't reporting valid data. The output remains true for as long as the sensor source doesn't have valid data. This can indicate a problem with the sensor, or the sensor being absent. | |
| MainScrnObHumidity | Reports if indoor humidity will be the reading that will be displayed under the current temperature on the Main page of the thermostat LCD. | |
| MaximumHumiditySetpointFeedback | Reports the humidity regulating setpoint. | |
| MinimumHumiditySetpointFeedback | Reports the humidity regulating setpoint. | |
| ODHumInvalid | Indicates that the corresponding when remote humidity sensor isn't reporting valid data. The output remains true for as long as the sensor source doesn't have valid data. This can indicate a problem with the sensor, or the sensor being absent. | |
| ODRem1Humidity | Reports if ODRem1Humidity will be the designator assigned to the remote sensors. | |
| ODRem2Humidity | Reports if ODRem2Humidity will be the designator assigned to the remote sensors. | |
| OmitLocalHumidity | Reports if local humidity will not be the designator assigned to the local (internal) sensors. | |
| OmitRem1Humidity | Reports if Rem1Humidity will not be the designator assigned to the remote sensors. | |
| OmitRem2Humidity | Reports if OmitRem2Humidity will not be the designator assigned to the remote sensors. | |
| OutdoorHumidity | Reports the humidity reading of any humidity sensor set to "OD" (Outdoor) in whole numbers. If more than one humidity sensor is set to OD, this is the mean outdoor humidity. Humidity sensors are manually set to Use, Omit, or Outdoor via the setup menus on the thermostat. | |
| OutdoorHumidityInput | Receives the outdoor relative humidity from a sensor that is not connected to the thermostat, for display on the Outdoor page of the thermostat LCD. This value is ignored if an outdoor humidity sensor (CHV-RTHS) is connected to the thermostat. | |
| RegHumInvalid | Indicates that the corresponding when remote humidity sensor isn't reporting valid data. The output remains true for as long as the sensor source doesn't have valid data. This can indicate a problem with the sensor, or the sensor being absent. | |
| RegulationHumidity | Reports the mean (averaged) humidity reading of all internal and remote humidity sensors set to "Use", in whole numbers. Humidity sensors are manually set to Use, Omit, or Outdoor via the setup menus on the thermostat. | |
| Rem1HumInvalid | Indicates that the corresponding when remote humidity sensor isn't reporting valid data. The output remains true for as long as the sensor source doesn't have valid data. This can indicate a problem with the sensor, or the sensor being absent. | |
| Rem2HumInvalid | Indicates that the corresponding when remote humidity sensor isn't reporting valid data. The output remains true for as long as the sensor source doesn't have valid data. This can indicate a problem with the sensor, or the sensor being absent. | |
| Remote1Humidity | Reports the humidity reading of the Remote 1 humidity sensor in whole numbers. The Remote 1 humidity reading is reported regardless of the Use/Omit/OD designation. | |
| Remote2Humidity | Reports the humidity reading of the Remote 2 humidity sensor in whole numbers. The Remote 2 humidity reading is reported regardless of the Use/Omit/OD designation. | |
| Remote3Humidity | Reports the humidity reading of the Remote 3 humidity sensor in whole numbers. The Remote 3 humidity reading is reported regardless of the Use/Omit/OD designation. | |
| UseLocalHumidity | Reports if local humidity will be the designator assigned to the local (internal) sensors. | |
| UseRem1Humidity | Reports if Rem1Humidity will be the designator assigned to the remote sensors. | |
| UseRem2Humidity | Reports if UseRem2Humidity will be the designator assigned to the remote sensors. |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |
| Name | Description | |
|---|---|---|
| DispHumidityModePageEventId | Event ID for the base event for indicating that the Humidity Mode page has been enabled for display on the thermostat LCD. | |
| DispHumidityViewPageEventId | Event ID for the base event for indicating that the Humidity View page has been enabled for display on the thermostat LCD. | |
| HumidifierEnableFeedbackEventId | Event ID for the base event for when the humidifier is enabled. | |
| HumidifierModeFeedbackEventId | Event ID for the base event for reporting the humidifier mode. | |
| HumidifierOffFeedbackEventId | Event ID for the base event for indicating that the humidifier is off. | |
| HumiditySetpointFeedbackEventId | Event ID for the base event for reporting the humidity regulating setpoint. | |
| LocalHumInvalidEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| MainScrnObHumidityEventId | Event ID for the base event for reporting the reading that will be displayed under the current temperature on the Main page of the thermostat LCD. | |
| MaximumHumiditySetpointFeedbackEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| MinimumHumiditySetpointFeedbackEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| ODHumInvalidEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| ODRem1HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. | |
| ODRem2HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. | |
| OmitLocalHumidityEventId | Event ID for the base event for reporting the designator assigned to the local (internal) sensors. | |
| OmitRem1HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. | |
| OmitRem2HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. | |
| RegHumInvalidEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| Rem1HumInvalidEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| Rem2HumInvalidEventId | Event ID for the base event for reporting when the remote humidity sensor isn't reporting valid data. | |
| UseLocalHumidityEventId | Event ID for the base event for reporting the designator assigned to the local (internal) sensors. | |
| UseRem1HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. | |
| UseRem2HumidityEventId | Event ID for the base event for reporting the designator assigned to the remote sensors. |