Click or drag to resize

Dmps3ProgramOutput Properties

The CardDmps3ProgramOutput type exposes the following members.

Properties
 NameDescription
Public propertyAmpPowerOffFeedback Property to determine if the Amp is off. true is off, false is on.
Public propertyAmpPowerOnFeedback Property to determine if the Amp is on. true is on, false is off.
Public propertyCode exampleAudioOut

The DMInputChange event will trigger with AudioOutEventId.

The DMInputChange event will trigger with AudioOutEventId.

Assigns the audio source to route to the corresponding audio output. The input has no effect when audio routing is disabled ("AudioEnter" = 'false'), or when audio breakaway is disabled ("EnableAudioBreakaway" = 'false'). null will clear the assigned source.
(Inherited from DMOutput)
Public propertyAudioOutFeedback Returns the audio source Object being routed to the corresponding output. null = no source
(Inherited from DMOutput)
Public propertyCode exampleAudioOutSource Selects audio output source.

This property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C

The property will not support eDmps34KAudioOutSource.Dm8 for DMPS3-4K-200-C nor DMPS3-4K-250-C


(Overrides DMOutputAudioOutSource)
Public propertyAudioOutSourceFeedback Reports currently selected audio output source.

This property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C

The DMOutputChange event will trigger with AudioOutEventId.


(Overrides DMOutputAudioOutSourceFeedback)
Public propertyBaseDevice The base switcher device this input/output belongs to.
(Inherited from DMInputOutputBase)
Public propertyCard Access to the plugged in card
(Inherited from DMInputOutputBase)
Public propertyCardInputOutputType This will dictate the type of card in the switcher for DMPS systems. See SwitcherInputs and SwitcherOutputs for more details.
(Inherited from DMInputOutputBase)
Public propertyCodec1Balance Property to set Codec 1's balance on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
Public propertyCodec1BalanceFeedback Property to read Codec 1's balance on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.

The DMOutputChange event will trigger with Codec1BalanceFeedBackEventId.

Public propertyCodec1Level Property to set Codec 1's level on this output. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyCodec1LevelDown Decreases the level of Codec 1 on this output.
Public propertyCodec1LevelFeedback Property to read Codec 1's level on this output. Valid values range from -800 (-80dB) to 100 (10dB).

The DMOutputChange event will trigger with Codec1LevelFeedBackEventId.

Public propertyCodec1LevelUp Increases the level of Codec 1 on this output.
Public propertyCodec2Balance Property to set Codec 2's balance on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
Public propertyCodec2BalanceFeedback Property to read Codec 2's balance on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.

The DMOutputChange event will trigger with Codec2BalanceFeedBackEventId.

Public propertyCodec2Level Property to set Codec 2's level on this output. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyCodec2LevelDown Decreases the level of Codec 2 on this output.
Public propertyCodec2LevelFeedback Property to read Codec 2's level on this output. Valid values range from -800 (-80dB) to 100 (10dB).

The DMOutputChange event will trigger with Codec2LevelFeedBackEventId.

Public propertyCodec2LevelUp Increases the level of Codec 2 on this output.
Public propertyCodecMute1OffFeedback Property to determine if Codec 1 is not muted on this output (true = not muted).

The DMOutputChange event will trigger with Codec1MuteOffFeedBackEventId.

Public propertyCodecMute1OnFeedback Property to determine if Codec 1 is muted on this output (true = muted).

The DMOutputChange event will trigger with Codec1MuteOnFeedBackEventId.

Public propertyCodecMute2OffFeedback Property to determine if Codec 2 is not muted on this output (true = not muted).

The DMOutputChange event will trigger with Codec2MuteOffFeedBackEventId.

Public propertyCodecMute2OnFeedback Property to determine if Codec 2 is muted on this output (true = muted).

The DMOutputChange event will trigger with Codec2MuteOnFeedBackEventId.

Public propertyEndpoint Route endpoint
(Inherited from DMInputOutputBase)
Public propertyEndpointNameFeedback

The DMInputChange event will trigger with EndpointNameEventId.

Text string that identifies the Endpoint name.
(Inherited from DMInputOutputBase)
Public propertyEndpointOnlineFeedback

On an input the DMInputChange event will trigger with EndpointOnlineEventId

On an output the DMOutputChange event will trigger with EndpointOnlineEventId

Indicates that the Endpoint is connected and detected at the input or output. The output remains 'true' for as long as the Endpoint is detected. When the endpoint is no longer present, the value changes to false.
(Inherited from DMInputOutputBase)
Public propertyHDBaseTDevice Get the current HDBaseTBase attached to this DM Input/Output
(Inherited from DMInputOutputBase)
Public propertyInputOutput The input output device that owns a port.
(Inherited from DMInputOutputBase)
Public propertyIoType The type of input or output
(Inherited from DMInputOutputBase)
Public propertyMasterMuteOffFeedBack Property that returns true when the Master is not muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertyMasterMuteOnFeedBack Property that returns true when the Master is muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertyMasterVolume Specifies the gain level for the Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertyMasterVolumeDown Decreases the master volume on this output while the property is true. Setting it to false will stop the decrease.
(Inherited from CardDmps3OutputBase)
Public propertyMasterVolumeFeedBack Indicates the gain level for the Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertyMasterVolumeUp Increases the master volume on this output while the property is true. Setting it to false will stop the increase.
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterLevel Specifies the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterLevelDown Decreases the Mic master volume on this output while the property is true. Setting it to false will stop the decrease.
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterLevelFeedBack Indicates the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterLevelUp Increases the Mic master volume on this output while the property is true. Setting it to false will stop the increase.
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterMuteOffFeedBack Property that returns true when the Mic Master is not muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertyMicMasterMuteOnFeedBack Property that returns true when the Mic Master is muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertyName Specifies the name of the corresponding output. The name is displayed on the LCD front panel and in DM Tool. The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space).
(Inherited from DMOutput)
Public propertyNameFeedback Specifies the name of the corresponding output stream. The name is displayed on the LCD front panel and in DM Tools. The string can consist of a maximum of 32 characters (0-9, -, +, [, ], aA-zZ, and space).
(Inherited from DMOutput)
Public propertyNumber The Number of stream input or output
(Inherited from DMInputOutputBase)
Protected propertyOnDm64 Property to indicate that this I/O is on a DM64 based switcher.
(Inherited from DMInputOutputBase)
Protected propertyOnDmps Property to indicate that this Input/Output is on a DMPS.
(Inherited from DMInputOutputBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)
(Inherited from DMInputOutputBase)
Public propertyOutputEqualizer Property to get the Output EQ from the Output.
Public propertyOutputMixer Property to get the Output Mixer from the Output.
Public propertyParent The parent that a given object was added to.
(Inherited from DMInputOutputBase)
Public propertyPoDMOverpowerFeedback Reports the overpower condition of the corresponding DM input or output.

The property is only supported on DMPS3-4K-200-C, DMPS3-4K-250-C, DMPS3-4K-300-C, and DMPS3-4K-350-C switchers. On other systems this property returns a null signal.

On a supported output card the DMOutputChange event will trigger with PoDMOverpowerFeedbackEventId.

On a supported input card the DMInputChange event will trigger with PoDMOverpowerFeedbackEventId.


(Inherited from DMInputOutputBase)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the DM switcher. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed
(Inherited from DMInputOutputBase)
Public propertySourceBalance Specifies the source balance between the left and right channels on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
(Inherited from CardDmps3OutputBase)
Public propertySourceBalanceFeedBack Indicates the source balance between the left and right channels on this output. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
(Inherited from CardDmps3OutputBase)
Public propertySourceLevel Specifies the gain level for the Source volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertySourceLevelDown Decreases the source volume on this output while the property is true. Setting it to false will stop the decrease.
(Inherited from CardDmps3OutputBase)
Public propertySourceLevelFeedBack Indicates the gain level for the Source volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CardDmps3OutputBase)
Public propertySourceLevelUp Increases the source volume on this output while the property is true. Setting it to false will stop the increase
(Inherited from CardDmps3OutputBase)
Public propertySourceMuteOffFeedBack Property that returns true when the Source is not muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertySourceMuteOnFeedBack Property that returns true when the Source is muted on this output, false otherwise.
(Inherited from CardDmps3OutputBase)
Public propertyType Get the type of stream this object represents.
(Inherited from CardDmps3OutputBase)
Public propertyCode exampleUSBRoutedTo Selects the input or output where the corresponding USB source (connected to an output slot of the switcher) will be routed. The input has no effect when USB routing is disabled ("USBEnter" = 'false'), or when USB breakaway is disabled ("EnableUSBBreakaway" = 'false'). Valid values are as follows: null = Break connection, valid DMInput or DMOutput object will assign that object.
(Inherited from DMOutput)
Public propertyUSBRoutedToFeedback Returns the input or output object where the corresponding USB source (connected to an output of the switcher) will be routed. a null return will indicate no assigned connection
(Inherited from DMOutput)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from DMInputOutputBase)
Public propertyCode exampleVideoOut Selects the video source to route to the corresponding video output, when video routing is enabled ("VideoEnter" = 'true'). null = no source
(Inherited from DMOutput)
Public propertyVideoOutFeedback

The DMInputChange event will trigger with VideoOutEventId.

The DMInputChange event will trigger with VideoOutEventId.

Returns the video source object being routed to the corresponding output. null = no source assigned
(Inherited from DMOutput)
Top
See Also