Zum |
The ZumLinkOccupancySensor type exposes the following members.
| Name | Description | |
|---|---|---|
| GraceOccupancyDetectedFeedback |
This property reports the grace occupancy state detected within 15s after a vacancy event.
True = Occupancy event detected within 15s of initial vacancy event; False = No occupancy event detected within 15s of initial vacancy event.
This property will trigger OccupancySensorChange event with GraceOccupancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| InfraredEnabledFeedback |
Property to report if the Infrared portion of sensor has been activated.
True = IR portion of the sensor is activated ; False = IR portion of the sensor is deactivated
This only applies to the Dual Technology (DT) products.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with InfraredEnabledEventId. (Inherited from ZumOccupancySensor) | |
| OccupancyDetectedFeedback |
This property reports the occupancy state detected.
True = Occupancy detected; False = Vacancy detected.
This property will trigger OccupancySensorChange event with OccupancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| OccupancyRawInfraredStateFeedback |
This property reports the raw occupancy state for Infrared (IR) products only.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with OccupancyRawInfraredStateFeedbackEventId. (Inherited from ZumOccupancySensor) | |
| OccupancyRawStateEnable |
This property is to enable/disable the reporting of raw states that are not tied to any timeout setting.
True: Enable raw occupancy digital output; False: Disable raw occupancy digital output This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| OccupancyRawStateFeedback |
This property reports the raw occupancy state.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property will trigger OccupancySensorChange event with OccupancyRawStateFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| OccupancyRawUltrasonicStateFeedback |
This property reports raw occupancy state for Ultrasonic (US) products only.
True = Raw Occupancy digital output is enabled; False = Raw Occupancy digital output is disabled.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with OccupancyRawUltrasonicStateFeedbackEventId. (Inherited from ZumOccupancySensor) | |
| Parent |
The parent that a ZumOccupancySensor object was added to.
(Inherited from ZumOccupancySensor) | |
| Range |
Property to set the detection range.
This only applies to the Ultrasonic products and Dual Technology products. The valid range is from 0-65535. 0 is the shortest range and 65535 is the longest range. | |
| RangeFeedback |
Property to report the detection range value that is set.
This only applies to the Ultrasonic and Dual Technology products. The valid range is from 0-65535. 0 is the shortest range and 65535 is the longest range. The OccupancySensorChange event will trigger with RangeFeedbackEventId. | |
| Sensitivity |
Property to set the detection sensitivity.
This only applies to the Ultrasonic and Dual Technology products. The valid range is 0-15. 0 is the lowest sensitivity, 15 is the highest sensitivity, 1 is the default/reset value. | |
| SensitivityFeedback |
Property to report the current detection sensitivity value that is set.
This only applies to the Ultrasonic and Dual Technology products. The valid range is 0-15. 0 is the lowest sensitivity, 15 is the highest sensitivity, 1 is the default/reset value. The OccupancySensorChange event will trigger with SensitivityFeedbackEventId. | |
| TimeOut |
This property sets the timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied.
Timeout is set in seconds. The valid values range from 0 to 65535. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| TimeOutFeeback |
This property reports the current timeout period which must elapse with no motion detected before the state of the room changes from occupied to unoccupied.
Timeout is set in seconds. The valid values range from 0 to 65535.
This property will trigger OccupancySensorChange event with TimeOutFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) | |
| UltrasonicEnabledFeedback |
Property to report ultrasonic portion of sensor has been activated.
True = US (ultrasonic) portion of the sensor is activated; False = US (ultrasonic) portion of the sensor is deactivated
This only applies to the Dual Technology (DT) products.
This property is not supported by ZumNetJBoxDaliGroups, ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.
This property will trigger OccupancySensorChange event with UltrasonicEnabledEventId. (Inherited from ZumOccupancySensor) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from ZumOccupancySensor) | |
| VacancyDetectedFeedback |
This property reports currently vacant (no motion detected) after the timeout has elapsed.
True = Vacancy detected; False = Occupancy Detected.
This property will trigger OccupancySensorChange event with VacancyDetectedFeedbackEventId. This property is not supported by ZUMLINK-JBOX-IO and ZUMLINK-DIN-IO.(Inherited from ZumOccupancySensor) |