Click or drag to resize

Xm Properties

The Xm type exposes the following members.

Properties
 NameDescription
Public propertyActiveChannelArtistFeedback The current artist.
(Inherited from SatelliteBase)
Public propertyActiveChannelCategoryFeedback The category of the current station.
(Inherited from SatelliteBase)
Public propertyActiveChannelNameFeedback The channel name of the current station.
(Inherited from SatelliteBase)
Public propertyActiveChannelNumberFeedback The current channel number.
(Inherited from SatelliteBase)
Public propertyActiveChannelSongFeedback The current song title.
(Inherited from SatelliteBase)
Public propertyCategoryModeOffFeedback Indicates that category mode is turned off.
(Inherited from SatelliteBase)
Public propertyCategoryModeOnFeedback Indicates that the tuner is currently in category mode.
(Inherited from SatelliteBase)
Public propertyChannelFeedback The current channel or frequency.
(Inherited from TunerBase)
Public propertyChannelReq Tunes to the specified XM channel. Valid values range from 0d to 255d, although the number of available channels may be less. ///
Public propertyCurrentChannelSkippedFeedback Indicates that the current channel is skipped in the channel list.
(Inherited from SatelliteBase)
Public propertyDiagnosticModeOffFeedback Turns off diagnostic mode.
(Inherited from SatelliteBase)
Public propertyDiagnosticModeOnFeedback Indicates that diagnostic mode is enabled.
(Inherited from SatelliteBase)
Public propertyDiagnosticsFeedback When in diagnostic mode this output string reports diagnostic messages 1 through 9.
(Inherited from SatelliteBase)
Public propertyGuideInfoFeedback The current program guide or focus list information, including category, artist and song title. The string is updated at the rate defined by GuideRptRate.
(Inherited from SatelliteBase)
Public propertyGuideRepeatRate When connected to the XM Guide sets the GuideInfoFeedback report rate in milliseconds (1d = 1ms). Valid values range from 50d (50ms) to 10,000d (10,000ms).
Public propertyISOConvOff Turns off ISO conversion.
(Inherited from SatelliteBase)
Public propertyMuteOffFeedback Indicates that audio is active (not muted).
(Inherited from TunerBase)
Public propertyMuteOnFeedback Indicates that AM/FM audio is muted.
(Inherited from TunerBase)
Public propertyNumber The number of this source on the Cen-Track.
Public propertyPowerOffFeedback Indicates that tuner power is off.
(Inherited from SatelliteBase)
Public propertyPowerOnFeedback Indicates that tuner power is on.
(Inherited from SatelliteBase)
Public propertyPowerUpBusyFeedback Indicates that the tuner is currently powering up.
(Inherited from SatelliteBase)
Public propertyPresetMode Sets the preset mode.
(Inherited from TunerBase)
Public propertyPresetModeFeedback Reports the current preset mode.
(Inherited from TunerBase)
Public propertyRepeaterSignalFeedback When signal strength reporting is enabled reports the strength of the ground repeater signal.
(Inherited from SatelliteBase)
Public propertySatelliteSignalFeedback When signal strength reporting is enabled reports the strength of the satellite signal.
(Inherited from SatelliteBase)
Public propertySignalStrengthFeedback When signal strength reporting is enabled reports the signal strength. This output does not apply to the CEN-TRACK-AMFMXM Rev2, which does not support signal strength reporting.
(Inherited from TunerBase)
Public propertySourceName Source name string that will be displayed on the CEN-TRACK front panel, which identifies the corresponding tuner source.
Public propertySourceNameFeedback The currently defined source name string.
Public propertyStationMinus Tunes to the previous station frequency on a pulse. If the input remains set to true for longer than 300 milliseconds the tuner will auto repeat until the input is set to false or after 500 repeats.
(Inherited from TunerBase)
Public propertyStationPlus Tunes to the next station frequency on a pulse. If the input remains set to true for longer than 300 milliseconds, the tuner will auto repeat until the input is set to false or after 500 repeats.
(Inherited from TunerBase)
Public propertyStatusFeedback The lower 10 bits of the analog value indicate diagnostic information reported by the tuner module. Note that the bit fields have no additional processing. They report exactly what the tuner module reports. Composite signal strength Bit 0: 1 = No signal Bit 1: 1 = Weak signal Bit 2: 1 = Moderate signal Bit 3: 1 = Strong signal Error messages Bit 4: 1 = No Antenna: This bit reports the status of antenna detection only and does not depend on the audio status. In contrast, the "Antenna Disconnected" advisory message on the ActiveChannelNameFeedback is only displayed when the antenna is disconnected AND there is a corresponding loss of audio. Bit 5: 1 = Audio NOT OK (also reported on the ActChanName output) Bit 6: 1 = Health NOT OK Bit 7: 1 = GCI changing (also reported on the ActChanName output) Bit 8: 1 = NOT primary module Bit 9: 1 = Data services changing Bit 10 through Bit 15: Unused
(Inherited from SatelliteBase)
Public propertyTuningBusyFeedback Indicates that the tuner is busy tuning to a station.
(Inherited from SatelliteBase)
Public propertyUTCDayFeedback The UTC day of the month.
(Inherited from SatelliteBase)
Public propertyUTCHourFeedback The UTC hour of the day.
(Inherited from SatelliteBase)
Public propertyUTCMinuteFeedback The UTC minutes reading.
(Inherited from SatelliteBase)
Public propertyUTCMonthFeedback The UTC month of the year.
(Inherited from SatelliteBase)
Public propertyUTCSecondFeedback The UTC seconds reading.
(Inherited from SatelliteBase)
Public propertyUTCYearFeedback The UTC reading for the current year.
(Inherited from SatelliteBase)
Top
See Also