Click or drag to resize

HdXspOutputChannelStatusOverOrUnderVoltageFeedback Property

Indicates that an over/under voltage fault condition has been detected at the corresponding channel.

An over/under voltage fault indicates that the power supply voltage level at the corresponding channel is over or under the required level.

When 'false', this indicates a normal condition.

When the fault condition occurs the output will trigger and the amplifier (all channels) will turn off. The controller remains on. The amp will not start again until the fault condition is removed and the Reset button on the front panel is pressed. Pressing the Reset button will only clear the fault if it has been removed.

The AmplifierStatusChange event will trigger with OverOrUnderVoltageFeedbackEventId.


Namespace: Crestron.SimplSharpPro.Media
Assembly: Crestron.SimplSharpPro.Media (in Crestron.SimplSharpPro.Media.dll) Version: 2.21.121
Syntax
C#
public BoolOutputSig OverOrUnderVoltageFeedback { get; }

Property Value

BoolOutputSig

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also