Dmc |
The DmcStroControl type exposes the following members.
| Name | Description | |
|---|---|---|
| Card |
Get the card that this DmcStrControl is apart of.
This property will trigger DMOutputChange with DMOutputEventIds for Dmco70/Dmco73/Dmco74/Dmco75/Dmco76/Dmco77 and DmcStroSingle objects. This property will trigger DMInputChange with DMOutputEventIds for DmcStr/DmcStrCresnet and "DmTxRx100Str" objects. (Inherited from DmcStrControl) | |
| ClientUrlFeedback |
Reports the URL to which the client is connected if SessionInitiation = ByReceiver.
The DMOutputChange event will trigger with ClientURLEventId. | |
| DisablePasswordProtectionFeedback |
Indicates the status of the password protection on the stream.
'true = Password disabled; 'false' = password enabled.
The DMOutputChange event will trigger with DisablePasswordProtectionEventId. | |
| DisableStreamAsTsFeedback |
Indicates that independent RTP streams are used for audio and video.
'true' = Independent RTP streams are used; 'false' = Independent RTP streams is not used.
The DMOutputChange event will trigger with DisableStreamasTSEventId. | |
| ElapsedSecFeedback | Obsolete. Indicates the time elapsed (in seconds) since streaming was started. (Inherited from DmcStrControl) | |
| ElapsedSecondsFeedback |
Indicates the time elapsed (in seconds) since streaming was started.
The BaseEvent event will trigger with ElapsedSecEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with ElapsedSecEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with ElapsedSecEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. This property is no longer supported by "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C" from the device firmware version 1.3626.00020 onwards.(Inherited from DmcStrControl) | |
| EnablePasswordProductionFeedback | Obsolete. Indicates the status of the password protection on the stream. 'true = Password enabled; 'false' = password disabled. | |
| EnablePasswordProtectionFeedback |
Indicates the status of the password protection on the stream.
'true = Password enabled; 'false' = password disabled.
The DMOutputChange event will trigger with EnablePasswordProtectionEventId. | |
| EnableStreamAsTsFeedback |
Indicates that the outgoing audio and video streams are encapsulated in a MPEG-2 Transport Stream container.
'true' = Outgoing audio and video streams encapsulated; 'false' = Outgoing audio and video streams not encapsulated
The DMOutputChange event will trigger with EnableStreamasTSEventId. | |
| EncoderReadyFeedback |
Indicates if the encoder is ready to start streaming.
The encoder may not be ready if the IP address has changed or another system event has caused a reconfiguration.
Start signals will be ignored until the encoder is ready to start streaming.
'true' = Encoder is ready; 'false' = Encoder is not ready.
The DMOutputChange event will trigger with EncoderReadyEventId. | |
| InputOutput |
The Input/Output card that this DmcStrControl is a part of.
(Inherited from DmcStrControl) | |
| MulticastAddress |
Specifies the multicast address to which the card will try to stream if SessionInitiation = MulticastViaRTSP.
This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from DmcStrControl) | |
| MulticastAddressFeedback |
Indicates the multicast address to which the card is streaming if SessionInitiation = MulticastViaRTSP.
The BaseEvent event will trigger with MulticastAddressEventId for DMCI Version of DmcStr, for DmcStrCresnet, for "DmTxRx100Str", or for "DmNvxBaseClass". The DMInputChange event will trigger with MulticastAddressEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with MulticastAddressEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| Parent |
The parent that a given object was added to.
(Inherited from DmcStrControl) | |
| Parent2 |
Set to the second parent if a given object has more than one parent.
(Inherited from DmcStrControl) | |
| Password |
Sets the password for the stream.
The password can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| PasswordFeedback |
Text string that reports the password used for the stream.
The BaseEvent event will trigger with PasswordEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with PasswordEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PasswordEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| PauseFeedback |
Indicates that the stream is paused.
The output remains 'true' for as long as the stream is paused.
This property is not supported by "DmNvxD30", "DmNvxD30C", "DmNvx350", "DmNvx350C", "DmNvx351", "DmNvx351C", "DmNvxD30", "DmNvxD30C", "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with PauseEventId for "DmTxRx100Str" and for DMCI version of DmcStr. The DMInputChange event will trigger with PauseEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PauseEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| SessionInitiation |
Specifies the session initiation status
(Inherited from DmcStrControl) | |
| SessionInitiationFeedback |
Reports the current session initiation status
The BaseEvent event will trigger with SessionInitiationEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with SessionInitiationEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with SessionInitiationEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StartFeedback |
Indicates if streaming has started.
'true' = Streaming started; 'false' = Streaming has not started.
The BaseEvent event will trigger with StartEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".Switch. The DMInputChange event will trigger with StartEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StartEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StatusDescriptionFeedback |
Returns the string value of the description of current error code (if any).
The DMOutputChange event will trigger with StatusDescriptionEventId. | |
| StopFeedback |
Indicates the stream status.
'true' = Stream stopped; 'false' = Stream not stopped.
The BaseEvent event will trigger with StopEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StopEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StopEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamBitrate | Sets the maximum bit rate of the video stream. Default stream bitrate = 5000d. Valid values range from 500 (500 kbps) to 25 000 (25 000 kbps), where 1 = 1 kbps. Out of range values are ignored. | |
| StreamBitrateFeedback |
Reports the current stream bitrate.
The BaseEvent event will trigger with StreamBitrateEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamBitrateEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamBitrateEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamFormat | Sets the format (resolution) of the video stream. Out of range values are ignored. | |
| StreamFormatFeedback |
Reports the currently selected resolution.
The DMOutputChange event will trigger with StreamFormatEventId. | |
| StreamProfile | Sets the video stream profile. | |
| StreamProfileFeedback |
Reports the currently selected profile.
The BaseEvent event will trigger with StreamProfileEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamProfileEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamProfileEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| TargetAddress | Specifies the IP address to which the card will connect if SessionInitiation = ByTransmitter. | |
| TargetAddressFeedback |
Returns the string value of the current video stream IP address to which the card is connected if SessionInitiation = ByTransmitter.
The DMOutputChange event will trigger with TargetAddressEventId. | |
| Type |
Get the eDmStreamTypeDmcStrControl object represents.
(Inherited from DmcStrControl) | |
| UserName |
Specifies the user name for the stream.
The user name can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| UserNameFeedback |
Text string that reports the user name used for the stream.
The BaseEvent event will trigger with UserNameEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with UserNameEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with UserNameEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DmcStrControl) |