Click or drag to resize

DvphdOutputCardReservedSigs Class

Output Card reserved sigs for DVPHD.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpProDeviceExtender
    Crestron.SimplSharpPro.UI.DVPHDDvphdOutputCardReservedSigs

Namespace: Crestron.SimplSharpPro.UI.DVPHD
Assembly: Crestron.SimplSharpPro.UI (in Crestron.SimplSharpPro.UI.dll) Version: 2.21.121
Syntax
C#
public sealed class DvphdOutputCardReservedSigs : DeviceExtender

The DvphdOutputCardReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyOutput1DownstreamPowerDetectedFeedback Property to indicate that the downstream receiver chip is powered for output card 1.

The DeviceExtenderSigChange event will trigger with BoolChange and Output1DownstreamPowerDetectedFeedback.

Public propertyOutput1EdidManufacturerTextFeedback Property to return the manufacturer of the display device, parsed from the EDID for output card 1.

The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidManufacturerTextFeedback.

Public propertyOutput1EdidMonitorNameTextFeedback Property to report the monitor name of the display device, parsed from the EDID for output card 1.

The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidMonitorNameTextFeedback.

Public propertyOutput1EdidPreferredTimingTextFeedback Property to report the preferred timing of the display device, parsed from the EDID for output card 1.

The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidPreferredTimingTextFeedback.

Public propertyOutput1EdidSerialNumberTextFeedback Property to report the serial number of the display device, parsed from the EDID for output card 1.

The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidSerialNumberTextFeedback.

Public propertyOutput1EdidValidFeedback Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 1. This signifies that the EDID is not corrupt.

The DeviceExtenderSigChange event will trigger with BoolChange and Output1EdidValidFeedback.

Public propertyOutput1HotPlugDetectedFeedback Property to indicate that a hot plug has been detected during run time for output card 1.

The DeviceExtenderSigChange event will trigger with BoolChange and Output1HotPlugDetectedFeedback.

Public propertyOutput1PositionHorizontal Property to set the horizontal position of the output image for output card 1.
Public propertyOutput1PositionHorizontalFeedback Property to report the current horizontal position of the output image for output card 1.

The DeviceExtenderSigChange event will trigger with UShortChange and Output1PositionHorizontalFeedback.

Public propertyOutput1PositionVertical Property to set the vertical position of the output image for output card 1.
Public propertyOutput1PositionVerticalFeedback Property to report the current vertical position of the output image for output card 1.

The DeviceExtenderSigChange event will trigger with UShortChange and Output1PositionVerticalFeedback.

Public propertyOutput1QmTransmitId Property to set the XMIT ID of the output card 1. The XMIT ID takes effect when the output card is in manual mode.
Public propertyOutput1QmTransmitIdFeedback Property to report the XMIT ID of the output card 1. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.

The DeviceExtenderSigChange event will trigger with UShortChange and Output1QmTransmitIdFeedback.

Public propertyOutput1QmTransmitMode Property to set the output card 1 to auto or manual mode.
Public propertyOutput1QmTransmitModeFeedback Property to report the mode of the output card 1.

The DeviceExtenderSigChange event will trigger with UShortChange and Output1QmTransmitModeFeedback.

Public propertyOutput1QmTransmitterIdDown Property to decrement the XMIT ID of the output card 1.
Public propertyOutput1QmTransmitterIdOffFeedback Property to indicate that the output card 1 is in auto mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output1QmTransmitterIdOffFeedback.

Public propertyOutput1QmTransmitterIdOnFeedback Property to indicate that the output card 2 is in manual mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output1QmTransmitterIdOnFeedback.

Public propertyOutput1QmTransmitterIdUp Property to increment the XMIT ID of the output card 1.
Public propertyOutput1UnderscanPercent Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 1. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyOutput1UnderscanPercentFeedback Property to report the current underscan setting for output card 1. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and Output1UnderscanPercentFeedback.

Public propertyOutput2DownstreamPowerDetectedFeedback Property to indicate that the downstream receiver chip is powered for output card 2.

The DeviceExtenderSigChange event will trigger with BoolChange and Output2DownstreamPowerDetectedFeedback.

Public propertyOutput2EdidManufacturerTextFeedback Property to return the manufacturer of the display device, parsed from the EDID for output card 2.

The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidManufacturerTextFeedback.

Public propertyOutput2EdidMonitorNameTextFeedback Property to report the monitor name of the display device, parsed from the EDID for output card 2.

The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidMonitorNameTextFeedback.

Public propertyOutput2EdidPreferredTimingTextFeedback Property to report the preferred timing of the display device, parsed from the EDID for output card 2.

The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidPreferredTimingTextFeedback.

Public propertyOutput2EdidSerialNumberTextFeedback Property to report the serial number of the display device, parsed from the EDID for output card 2.

The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidSerialNumberTextFeedback.

Public propertyOutput2EdidValidFeedback Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 2. This signifies that the EDID is not corrupt.

The DeviceExtenderSigChange event will trigger with BoolChange and Output2EdidValidFeedback.

Public propertyOutput2HotPlugDetectedFeedback Property to indicate that a hot plug has been detected during run time for output card 2.

The DeviceExtenderSigChange event will trigger with BoolChange and Output2HotPlugDetectedFeedback.

Public propertyOutput2PositionHorizontal Property to set the horizontal position of the output image for output card 2.
Public propertyOutput2PositionHorizontalFeedback Property to report the current horizontal position of the output image for output card 2.

The DeviceExtenderSigChange event will trigger with UShortChange and Output2PositionHorizontalFeedback.

Public propertyOutput2PositionVertical Property to set the vertical position of the output image for output card 2.
Public propertyOutput2PositionVerticalFeedback Property to report the current vertical position of the output image for output card 2.

The DeviceExtenderSigChange event will trigger with UShortChange and Output2PositionVerticalFeedback.

Public propertyOutput2QmTransmitId Property to set the XMIT ID of the output card 2. The XMIT ID takes effect when the output card is in manual mode.
Public propertyOutput2QmTransmitIdFeedback Property to report the XMIT ID of the output card 2. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.

The DeviceExtenderSigChange event will trigger with UShortChange and Output2QmTransmitIdFeedback.

Public propertyOutput2QmTransmitMode Property to set the output card 2 to auto or manual mode.
Public propertyOutput2QmTransmitModeFeedback Property to report the mode of the output card 2.

The DeviceExtenderSigChange event will trigger with UShortChange and Output2QmTransmitModeFeedback.

Public propertyOutput2QmTransmitterIdDown Property to decrement the XMIT ID of the output card 2.
Public propertyOutput2QmTransmitterIdOffFeedback Property to indicate that the output card 2 is in auto mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output2QmTransmitterIdOffFeedback.

Public propertyOutput2QmTransmitterIdOnFeedback Property to indicate that the output card 1 is in manual mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output2QmTransmitterIdOnFeedback.

Public propertyOutput2QmTransmitterIdUp Property to increment the XMIT ID of the output card 2.
Public propertyOutput2UnderscanPercent Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 2. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyOutput2UnderscanPercentFeedback Property to report the current underscan setting for output card 2. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and Output2UnderscanPercentFeedback.

Public propertyOutput3DownstreamPowerDetectedFeedback Property to indicate that the downstream receiver chip is powered for output card 3.

The DeviceExtenderSigChange event will trigger with BoolChange and Output3DownstreamPowerDetectedFeedback.

Public propertyOutput3EdidManufacturerTextFeedback Property to return the manufacturer of the display device, parsed from the EDID for output card 3.

The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidManufacturerTextFeedback.

Public propertyOutput3EdidMonitorNameTextFeedback Property to report the monitor name of the display device, parsed from the EDID for output card 3.

The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidMonitorNameTextFeedback.

Public propertyOutput3EdidPreferredTimingTextFeedback Property to report the preferred timing of the display device, parsed from the EDID for output card 3.

The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidPreferredTimingTextFeedback.

Public propertyOutput3EdidSerialNumberTextFeedback Property to report the serial number of the display device, parsed from the EDID for output card 3.

The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidSerialNumberTextFeedback.

Public propertyOutput3EdidValidFeedback Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 3. This signifies that the EDID is not corrupt.

The DeviceExtenderSigChange event will trigger with BoolChange and Output3EdidValidFeedback.

Public propertyOutput3HotPlugDetectedFeedback Property to indicate that a hot plug has been detected during run time for output card 3.

The DeviceExtenderSigChange event will trigger with BoolChange and Output3HotPlugDetectedFeedback.

Public propertyOutput3PositionHorizontal Property to set the horizontal position of the output image for output card 3.
Public propertyOutput3PositionHorizontalFeedback Property to report the current horizontal position of the output image for output card 3.

The DeviceExtenderSigChange event will trigger with UShortChange and Output3PositionHorizontalFeedback.

Public propertyOutput3PositionVertical Property to set the vertical position of the output image for output card 3.
Public propertyOutput3PositionVerticalFeedback Property to report the current vertical position of the output image for output card 3.

The DeviceExtenderSigChange event will trigger with UShortChange and Output3PositionVerticalFeedback.

Public propertyOutput3QmTransmitId Property to set the XMIT ID of the output card 3. The XMIT ID takes effect when the output card is in manual mode.
Public propertyOutput3QmTransmitIdFeedback Property to report the XMIT ID of the output card 3. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.

The DeviceExtenderSigChange event will trigger with UShortChange and Output3QmTransmitIdFeedback.

Public propertyOutput3QmTransmitMode Property to set the output card 3 to auto or manual mode.
Public propertyOutput3QmTransmitModeFeedback Property to report the mode of the output card 3.

The DeviceExtenderSigChange event will trigger with UShortChange and Output3QmTransmitModeFeedback.

Public propertyOutput3QmTransmitterIdDown Property to decrement the XMIT ID of the output card 3.
Public propertyOutput3QmTransmitterIdOffFeedback Property to indicate that the output card 3 is in auto mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output3QmTransmitterIdOffFeedback.

Public propertyOutput3QmTransmitterIdOnFeedback Property to indicate that the output card 3 is in manual mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output3QmTransmitterIdOnFeedback.

Public propertyOutput3QmTransmitterIdUp Property to increment the XMIT ID of the output card 3.
Public propertyOutput3UnderscanPercent Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 3. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyOutput3UnderscanPercentFeedback Property to report the current underscan setting for output card 3. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and Output3UnderscanPercentFeedback.

Public propertyOutput4DownstreamPowerDetectedFeedback Property to indicate that the downstream receiver chip is powered for output card 4.

The DeviceExtenderSigChange event will trigger with BoolChange and Output4DownstreamPowerDetectedFeedback.

Public propertyOutput4EdidManufacturerTextFeedback Property to return the manufacturer of the display device, parsed from the EDID for output card 4.

The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidManufacturerTextFeedback.

Public propertyOutput4EdidMonitorNameTextFeedback Property to report the monitor name of the display device, parsed from the EDID for output card 4.

The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidMonitorNameTextFeedback.

Public propertyOutput4EdidPreferredTimingTextFeedback Property to report the preferred timing of the display device, parsed from the EDID for output card 4.

The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidPreferredTimingTextFeedback.

Public propertyOutput4EdidSerialNumberTextFeedback Property to report the serial number of the display device, parsed from the EDID for output card 4.

The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidSerialNumberTextFeedback.

Public propertyOutput4EdidValidFeedback Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 4. This signifies that the EDID is not corrupt.

The DeviceExtenderSigChange event will trigger with BoolChange and Output4EdidValidFeedback.

Public propertyOutput4HotPlugDetectedFeedback Property to indicate that a hot plug has been detected during run time for output card 4.

The DeviceExtenderSigChange event will trigger with BoolChange and Output4HotPlugDetectedFeedback.

Public propertyOutput4PositionHorizontal Property to set the horizontal position of the output image for output card 4.
Public propertyOutput4PositionHorizontalFeedback Property to report the current horizontal position of the output image for output card 4.

The DeviceExtenderSigChange event will trigger with UShortChange and Output4PositionHorizontalFeedback.

Public propertyOutput4PositionVertical Property to set the vertical position of the output image for output card 4.
Public propertyOutput4PositionVerticalFeedback Property to report the current vertical position of the output image for output card 4.

The DeviceExtenderSigChange event will trigger with UShortChange and Output4PositionVerticalFeedback.

Public propertyOutput4QmTransmitId Property to set the XMIT ID of the output card 4. The XMIT ID takes effect when the output card is in manual mode.
Public propertyOutput4QmTransmitIdFeedback Property to report the XMIT ID of the output card 4. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.

The DeviceExtenderSigChange event will trigger with UShortChange and Output4QmTransmitIdFeedback.

Public propertyOutput4QmTransmitMode Property to set the output card 4 to auto or manual mode.
Public propertyOutput4QmTransmitModeFeedback Property to report the mode of the output card 4.

The DeviceExtenderSigChange event will trigger with UShortChange and Output4QmTransmitModeFeedback.

Public propertyOutput4QmTransmitterIdDown Property to decrement the XMIT ID of the output card 4.
Public propertyOutput4QmTransmitterIdOffFeedback Property to indicate that the output card 4 is in auto mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output4QmTransmitterIdOffFeedback.

Public propertyOutput4QmTransmitterIdOnFeedback Property to indicate that the output card 4 is in manual mode.

The DeviceExtenderSigChange event will trigger with BoolChange and Output4QmTransmitterIdOnFeedback.

Public propertyOutput4QmTransmitterIdUp Property to increment the XMIT ID of the output card 4.
Public propertyOutput4UnderscanPercent Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 4. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyOutput4UnderscanPercentFeedback Property to report the current underscan setting for output card 4. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The DeviceExtenderSigChange event will trigger with UShortChange and Output4UnderscanPercentFeedback.

Public propertyOutputAutoHdmiModeOffFeedback Property to indicate that auto mode is off.
Public propertyOutputAutoHdmiModeOnFeedback Property to indicate that the output resolution is set to auto mode.

The DeviceExtenderSigChange event will trigger with BoolChange and OutputAutoHdmiModeOnFeedback.

Public propertyOutputSlot1OccupiedFeedback Property to indicate the presence of an output card installed in the output slot 1.

The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot1OccupiedFeedback.

Public propertyOutputSlot2OccupiedFeedback Property to indicate the presence of an output card installed in the output slot 2.

The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot2OccupiedFeedback.

Public propertyOutputSlot3OccupiedFeedback Property to indicate the presence of an output card installed in the output slot 3.

The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot3OccupiedFeedback.

Public propertyOutputSlot4OccupiedFeedback Property to indicate the presence of an output card installed in the output slot 4.

The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot4OccupiedFeedback.

Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodInitializeJoins Method to initialize the Sigs of the Output Card extender.
(Overrides DeviceExtenderInitializeJoins)
Protected methodMapAnalogInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapAnalogOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Public methodOutput1QmTransmitterIdOff Method to set the output card 1 to auto mode.
Public methodOutput1QmTransmitterIdOn Method to set the output card 1 to manual mode.
Public methodOutput2QmTransmitterIdOff Method to set the output card 2 to auto mode.
Public methodOutput2QmTransmitterIdOn Method to set the output card 2 to manual mode.
Public methodOutput3QmTransmitterIdOff Method to set the output card 3 to auto mode.
Public methodOutput3QmTransmitterIdOn Method to set the output card 3 to manual mode.
Public methodOutput4QmTransmitterIdOff Method to set the output card 4 to auto mode.
Public methodOutput4QmTransmitterIdOn Method to set the output card 4 to manual mode.
Public methodOutputAutoHdmiModeOff Method to turn off auto mode.
Public methodOutputAutoHdmiModeOn Method to set the output resolution to auto mode.
Protected methodSendCueEventDataForDeviceExtender Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodUse Set the extender as usable on the device. Call this method before registration of the device.
(Inherited from DeviceExtender)
Top
Events
 NameDescription
Public eventDeviceExtenderSigChange Event to receive sig information intended for a device extender. When processing this event, it will hold off other sigs from being received from the device. If one desires to continue processing the data and receive more information, launch a new thread and allow this event to exit.
(Inherited from DeviceExtender)
Top
Fields
 NameDescription
Protected field_InUse Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also