Dvphd |
The DvphdOutputCardReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| Output1DownstreamPowerDetectedFeedback |
Property to indicate that the downstream receiver chip is powered for output card 1.
The DeviceExtenderSigChange event will trigger with BoolChange and Output1DownstreamPowerDetectedFeedback. | |
| Output1EdidManufacturerTextFeedback |
Property to return the manufacturer of the display device, parsed from the EDID for output card 1.
The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidManufacturerTextFeedback. | |
| Output1EdidMonitorNameTextFeedback |
Property to report the monitor name of the display device, parsed from the EDID for output card 1.
The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidMonitorNameTextFeedback. | |
| Output1EdidPreferredTimingTextFeedback |
Property to report the preferred timing of the display device, parsed from the EDID for output card 1.
The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidPreferredTimingTextFeedback. | |
| Output1EdidSerialNumberTextFeedback |
Property to report the serial number of the display device, parsed from the EDID for output card 1.
The DeviceExtenderSigChange event will trigger with StringChange and Output1EdidSerialNumberTextFeedback. | |
| Output1EdidValidFeedback |
Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 1. This signifies that the EDID is not corrupt.
The DeviceExtenderSigChange event will trigger with BoolChange and Output1EdidValidFeedback. | |
| Output1HotPlugDetectedFeedback |
Property to indicate that a hot plug has been detected during run time for output card 1.
The DeviceExtenderSigChange event will trigger with BoolChange and Output1HotPlugDetectedFeedback. | |
| Output1PositionHorizontal | Property to set the horizontal position of the output image for output card 1. | |
| Output1PositionHorizontalFeedback |
Property to report the current horizontal position of the output image for output card 1.
The DeviceExtenderSigChange event will trigger with UShortChange and Output1PositionHorizontalFeedback. | |
| Output1PositionVertical | Property to set the vertical position of the output image for output card 1. | |
| Output1PositionVerticalFeedback |
Property to report the current vertical position of the output image for output card 1.
The DeviceExtenderSigChange event will trigger with UShortChange and Output1PositionVerticalFeedback. | |
| Output1QmTransmitId | Property to set the XMIT ID of the output card 1. The XMIT ID takes effect when the output card is in manual mode. | |
| Output1QmTransmitIdFeedback |
Property to report the XMIT ID of the output card 1. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.
The DeviceExtenderSigChange event will trigger with UShortChange and Output1QmTransmitIdFeedback. | |
| Output1QmTransmitMode | Property to set the output card 1 to auto or manual mode. | |
| Output1QmTransmitModeFeedback |
Property to report the mode of the output card 1.
The DeviceExtenderSigChange event will trigger with UShortChange and Output1QmTransmitModeFeedback. | |
| Output1QmTransmitterIdDown | Property to decrement the XMIT ID of the output card 1. | |
| Output1QmTransmitterIdOffFeedback |
Property to indicate that the output card 1 is in auto mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output1QmTransmitterIdOffFeedback. | |
| Output1QmTransmitterIdOnFeedback |
Property to indicate that the output card 2 is in manual mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output1QmTransmitterIdOnFeedback. | |
| Output1QmTransmitterIdUp | Property to increment the XMIT ID of the output card 1. | |
| Output1UnderscanPercent | Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 1. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| Output1UnderscanPercentFeedback |
Property to report the current underscan setting for output card 1.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and Output1UnderscanPercentFeedback. | |
| Output2DownstreamPowerDetectedFeedback |
Property to indicate that the downstream receiver chip is powered for output card 2.
The DeviceExtenderSigChange event will trigger with BoolChange and Output2DownstreamPowerDetectedFeedback. | |
| Output2EdidManufacturerTextFeedback |
Property to return the manufacturer of the display device, parsed from the EDID for output card 2.
The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidManufacturerTextFeedback. | |
| Output2EdidMonitorNameTextFeedback |
Property to report the monitor name of the display device, parsed from the EDID for output card 2.
The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidMonitorNameTextFeedback. | |
| Output2EdidPreferredTimingTextFeedback |
Property to report the preferred timing of the display device, parsed from the EDID for output card 2.
The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidPreferredTimingTextFeedback. | |
| Output2EdidSerialNumberTextFeedback |
Property to report the serial number of the display device, parsed from the EDID for output card 2.
The DeviceExtenderSigChange event will trigger with StringChange and Output2EdidSerialNumberTextFeedback. | |
| Output2EdidValidFeedback |
Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 2. This signifies that the EDID is not corrupt.
The DeviceExtenderSigChange event will trigger with BoolChange and Output2EdidValidFeedback. | |
| Output2HotPlugDetectedFeedback |
Property to indicate that a hot plug has been detected during run time for output card 2.
The DeviceExtenderSigChange event will trigger with BoolChange and Output2HotPlugDetectedFeedback. | |
| Output2PositionHorizontal | Property to set the horizontal position of the output image for output card 2. | |
| Output2PositionHorizontalFeedback |
Property to report the current horizontal position of the output image for output card 2.
The DeviceExtenderSigChange event will trigger with UShortChange and Output2PositionHorizontalFeedback. | |
| Output2PositionVertical | Property to set the vertical position of the output image for output card 2. | |
| Output2PositionVerticalFeedback |
Property to report the current vertical position of the output image for output card 2.
The DeviceExtenderSigChange event will trigger with UShortChange and Output2PositionVerticalFeedback. | |
| Output2QmTransmitId | Property to set the XMIT ID of the output card 2. The XMIT ID takes effect when the output card is in manual mode. | |
| Output2QmTransmitIdFeedback |
Property to report the XMIT ID of the output card 2. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.
The DeviceExtenderSigChange event will trigger with UShortChange and Output2QmTransmitIdFeedback. | |
| Output2QmTransmitMode | Property to set the output card 2 to auto or manual mode. | |
| Output2QmTransmitModeFeedback |
Property to report the mode of the output card 2.
The DeviceExtenderSigChange event will trigger with UShortChange and Output2QmTransmitModeFeedback. | |
| Output2QmTransmitterIdDown | Property to decrement the XMIT ID of the output card 2. | |
| Output2QmTransmitterIdOffFeedback |
Property to indicate that the output card 2 is in auto mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output2QmTransmitterIdOffFeedback. | |
| Output2QmTransmitterIdOnFeedback |
Property to indicate that the output card 1 is in manual mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output2QmTransmitterIdOnFeedback. | |
| Output2QmTransmitterIdUp | Property to increment the XMIT ID of the output card 2. | |
| Output2UnderscanPercent | Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 2. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| Output2UnderscanPercentFeedback |
Property to report the current underscan setting for output card 2.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and Output2UnderscanPercentFeedback. | |
| Output3DownstreamPowerDetectedFeedback |
Property to indicate that the downstream receiver chip is powered for output card 3.
The DeviceExtenderSigChange event will trigger with BoolChange and Output3DownstreamPowerDetectedFeedback. | |
| Output3EdidManufacturerTextFeedback |
Property to return the manufacturer of the display device, parsed from the EDID for output card 3.
The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidManufacturerTextFeedback. | |
| Output3EdidMonitorNameTextFeedback |
Property to report the monitor name of the display device, parsed from the EDID for output card 3.
The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidMonitorNameTextFeedback. | |
| Output3EdidPreferredTimingTextFeedback |
Property to report the preferred timing of the display device, parsed from the EDID for output card 3.
The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidPreferredTimingTextFeedback. | |
| Output3EdidSerialNumberTextFeedback |
Property to report the serial number of the display device, parsed from the EDID for output card 3.
The DeviceExtenderSigChange event will trigger with StringChange and Output3EdidSerialNumberTextFeedback. | |
| Output3EdidValidFeedback |
Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 3. This signifies that the EDID is not corrupt.
The DeviceExtenderSigChange event will trigger with BoolChange and Output3EdidValidFeedback. | |
| Output3HotPlugDetectedFeedback |
Property to indicate that a hot plug has been detected during run time for output card 3.
The DeviceExtenderSigChange event will trigger with BoolChange and Output3HotPlugDetectedFeedback. | |
| Output3PositionHorizontal | Property to set the horizontal position of the output image for output card 3. | |
| Output3PositionHorizontalFeedback |
Property to report the current horizontal position of the output image for output card 3.
The DeviceExtenderSigChange event will trigger with UShortChange and Output3PositionHorizontalFeedback. | |
| Output3PositionVertical | Property to set the vertical position of the output image for output card 3. | |
| Output3PositionVerticalFeedback |
Property to report the current vertical position of the output image for output card 3.
The DeviceExtenderSigChange event will trigger with UShortChange and Output3PositionVerticalFeedback. | |
| Output3QmTransmitId | Property to set the XMIT ID of the output card 3. The XMIT ID takes effect when the output card is in manual mode. | |
| Output3QmTransmitIdFeedback |
Property to report the XMIT ID of the output card 3. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.
The DeviceExtenderSigChange event will trigger with UShortChange and Output3QmTransmitIdFeedback. | |
| Output3QmTransmitMode | Property to set the output card 3 to auto or manual mode. | |
| Output3QmTransmitModeFeedback |
Property to report the mode of the output card 3.
The DeviceExtenderSigChange event will trigger with UShortChange and Output3QmTransmitModeFeedback. | |
| Output3QmTransmitterIdDown | Property to decrement the XMIT ID of the output card 3. | |
| Output3QmTransmitterIdOffFeedback |
Property to indicate that the output card 3 is in auto mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output3QmTransmitterIdOffFeedback. | |
| Output3QmTransmitterIdOnFeedback |
Property to indicate that the output card 3 is in manual mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output3QmTransmitterIdOnFeedback. | |
| Output3QmTransmitterIdUp | Property to increment the XMIT ID of the output card 3. | |
| Output3UnderscanPercent | Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 3. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| Output3UnderscanPercentFeedback |
Property to report the current underscan setting for output card 3.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and Output3UnderscanPercentFeedback. | |
| Output4DownstreamPowerDetectedFeedback |
Property to indicate that the downstream receiver chip is powered for output card 4.
The DeviceExtenderSigChange event will trigger with BoolChange and Output4DownstreamPowerDetectedFeedback. | |
| Output4EdidManufacturerTextFeedback |
Property to return the manufacturer of the display device, parsed from the EDID for output card 4.
The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidManufacturerTextFeedback. | |
| Output4EdidMonitorNameTextFeedback |
Property to report the monitor name of the display device, parsed from the EDID for output card 4.
The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidMonitorNameTextFeedback. | |
| Output4EdidPreferredTimingTextFeedback |
Property to report the preferred timing of the display device, parsed from the EDID for output card 4.
The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidPreferredTimingTextFeedback. | |
| Output4EdidSerialNumberTextFeedback |
Property to report the serial number of the display device, parsed from the EDID for output card 4.
The DeviceExtenderSigChange event will trigger with StringChange and Output4EdidSerialNumberTextFeedback. | |
| Output4EdidValidFeedback |
Property to indicate that a valid EDID (Extended Display Identification Data) is detected by the system for the output card 4. This signifies that the EDID is not corrupt.
The DeviceExtenderSigChange event will trigger with BoolChange and Output4EdidValidFeedback. | |
| Output4HotPlugDetectedFeedback |
Property to indicate that a hot plug has been detected during run time for output card 4.
The DeviceExtenderSigChange event will trigger with BoolChange and Output4HotPlugDetectedFeedback. | |
| Output4PositionHorizontal | Property to set the horizontal position of the output image for output card 4. | |
| Output4PositionHorizontalFeedback |
Property to report the current horizontal position of the output image for output card 4.
The DeviceExtenderSigChange event will trigger with UShortChange and Output4PositionHorizontalFeedback. | |
| Output4PositionVertical | Property to set the vertical position of the output image for output card 4. | |
| Output4PositionVerticalFeedback |
Property to report the current vertical position of the output image for output card 4.
The DeviceExtenderSigChange event will trigger with UShortChange and Output4PositionVerticalFeedback. | |
| Output4QmTransmitId | Property to set the XMIT ID of the output card 4. The XMIT ID takes effect when the output card is in manual mode. | |
| Output4QmTransmitIdFeedback |
Property to report the XMIT ID of the output card 4. When in auto mode, the reported XMIT ID will be the same as the Cresnet ID.
The DeviceExtenderSigChange event will trigger with UShortChange and Output4QmTransmitIdFeedback. | |
| Output4QmTransmitMode | Property to set the output card 4 to auto or manual mode. | |
| Output4QmTransmitModeFeedback |
Property to report the mode of the output card 4.
The DeviceExtenderSigChange event will trigger with UShortChange and Output4QmTransmitModeFeedback. | |
| Output4QmTransmitterIdDown | Property to decrement the XMIT ID of the output card 4. | |
| Output4QmTransmitterIdOffFeedback |
Property to indicate that the output card 4 is in auto mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output4QmTransmitterIdOffFeedback. | |
| Output4QmTransmitterIdOnFeedback |
Property to indicate that the output card 4 is in manual mode.
The DeviceExtenderSigChange event will trigger with BoolChange and Output4QmTransmitterIdOnFeedback. | |
| Output4QmTransmitterIdUp | Property to increment the XMIT ID of the output card 4. | |
| Output4UnderscanPercent | Property to shrink the image by the percentage in order to compensate for a display that can not disable its own overscan for output card 4. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| Output4UnderscanPercentFeedback |
Property to report the current underscan setting for output card 4.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The DeviceExtenderSigChange event will trigger with UShortChange and Output4UnderscanPercentFeedback. | |
| OutputAutoHdmiModeOffFeedback | Property to indicate that auto mode is off. | |
| OutputAutoHdmiModeOnFeedback |
Property to indicate that the output resolution is set to auto mode.
The DeviceExtenderSigChange event will trigger with BoolChange and OutputAutoHdmiModeOnFeedback. | |
| OutputSlot1OccupiedFeedback |
Property to indicate the presence of an output card installed in the output slot 1.
The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot1OccupiedFeedback. | |
| OutputSlot2OccupiedFeedback |
Property to indicate the presence of an output card installed in the output slot 2.
The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot2OccupiedFeedback. | |
| OutputSlot3OccupiedFeedback |
Property to indicate the presence of an output card installed in the output slot 3.
The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot3OccupiedFeedback. | |
| OutputSlot4OccupiedFeedback |
Property to indicate the presence of an output card installed in the output slot 4.
The DeviceExtenderSigChange event will trigger with BoolChange and OutputSlot4OccupiedFeedback. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |