Dm |
The DmNvxUsbInput type exposes the following members.
| Name | Description | |
|---|---|---|
| AutomaticUsbPairingDisabledFeedback |
Property to indicate automatic usb 2.0 pairing is disabled.
This property is not supported by DMPS-4200 device. The UsbInputChange event will trigger with AutomaticPairingDisabledFeedbackEventId. | |
| AutomaticUsbPairingEnabledFeedback |
Property to indicate automatic usb 2.0 pairing is enabled.
This property is not supported by DMPS-4200 device. The UsbInputChange event will trigger with AutomaticPairingEnabledFeedbackEventId. | |
| HostSelection | Property to select which USB-C port is the Host. Remote devices enumerate to the PC connected to the Host port. UsbFollowsVideo shall have the following behavior: USB Host automatically switches to active video source. This is for when 2 PCs are connected to HDMI for video and to USB-C for USB data only. IF HDMI 1 video selected, USB HOST = USB-C 1 IF HDMI 2 video selected, USB HOST = USB-C 2 IF USB-C 1 video selected, USB HOST = USB-C 1 IF USB-C 2 video selected, USB HOST = USB-C 2 Note: This setting only applies when USB mode is set to LOCAL. If this property is not supported then UsbFollowsVideo will be returned and write to this property will be ignored. | |
| HostSelectionFeedback |
Property to report the current Host USB-C port. Remote devices enumerate to the PC connected to the Host port.
UsbFollowsVideo shall have the following behavior:
USB Host automatically switches to active video source. This is for when 2 PCs are connected to HDMI for video and to USB-C for USB data only.
IF HDMI 1 video selected,
USB HOST = USB-C 1
IF HDMI 2 video selected,
USB HOST = USB-C 2
IF USB-C 1 video selected,
USB HOST = USB-C 1
IF USB-C 2 video selected,
USB HOST = USB-C 2
Note: This setting only applies when USB mode is set to LOCAL.
If this property is not supported then UsbFollowsVideo will be returned.
The UsbInputChange event will trigger with HostSelectionFeedbackEventId. | |
| LocalDeviceIdFeedback |
Property to report the ID of the local Icron device (last 6 digits of the NVX's MAC address.)
The UsbInputChange event will trigger with LocalDeviceIdFeedbackEventId. | |
| LocalDeviceIpAddrFeedback |
Property to report the IP address of the local device.
The UsbInputChange event will trigger with LocalDeviceIpAddrFeedbackEventId. | |
| Mode | Property to select the mode of the Icron device. If this property is not supported then Local will be returned and write to this property will be ignored. | |
| ModeFeedback |
Property to report the current mode of the Icron device.
If this property is not supported then Local will be returned.
The UsbInputChange event will trigger with ModeFeedbackEventId. | |
| MultipleUsbDeviceDisabledFeedback |
Property to indicate Multiple usb 2.0 pairing is disabled.
This property is not supported by DMPS-4200 device. The UsbInputChange event will trigger with MultipleUsbDeviceDisabledFeedbackEventId. | |
| MultipleUsbDeviceEnabledFeedback |
Property to indicate multiple usb 2.0 pairing is enabled.
This property is not supported by DMPS-4200 device. The UsbInputChange event will trigger with MultipleUsbDeviceEnabledFeedbackEventId. | |
| PairedFeedback | Obsolete. Property to indicate that the device is paired with the device defined in RemoteDeviceId. | |
| PairFeedback |
Property to indicate that the device is paired with the device defined in RemoteDeviceId.
The UsbInputChange event will trigger with PairedEventId and Index will indicate the index into the PairFeedback collection. This property is not supported by DMPS-4200 device. | |
| Parent | The parent that a DmNvxUsbInput object was added to. | |
| RemoteDeviceId | Property to specify the remote device to which the Icron device should attempt to pair. | |
| RemoteDeviceIdFeedback |
Property to report the device to which the device is paired. If the device is Crestron device, it reports only the last six digits
of the MAC address with no separators. If the device is a non-Crestron device, it reports all 12 digits without the separators.
The UsbInputChange event will trigger with RemoteDeviceIdFeedbackEventId. Note: This property is equivalent to first index of RemoteDeviceIdFeedbacks collection. | |
| RemoteDeviceIdFeedbacks |
Property to report the device to which the device is paired. If the device is Crestron device, it reports only the last six digits of the MAC
address with no separators. If the device is a non-Crestron device, it reports all 12 digits without the separators.
The UsbInputChange event will trigger with RemoteDeviceIdFeedbackEventId and Index will indicate the index into the RemoteDeviceIdFeedback collection. | |
| RemoteDeviceIds | Collection of remote device IDs. Property to specify the remote device to which the Icron device should attempt to pair. | |
| RemoteDeviceIpAddr | Property to set the IP address of the device to which the device is paired. | |
| RemoteDeviceIpAddrFeedback |
Property to report the IP address of the device to which the device is paired.
The UsbInputChange event will trigger with RemoteDeviceIpAddrFeedbackEventId. | |
| StatusFeedback |
Property to report any errors including but not limited to:
The UsbInputChange event will trigger with StatusFeedbackEventId If this property is not supported then NA will be returned. | |
| TransportMode | Property to set the transport mode of the Icron device. If this property is not supported then Layer2 will be returned and write to this property will be ignored. | |
| TransportModeFeedback |
Property to report the transport mode of the Icron device.
If this property is not supported then Layer2 will be returned.
The UsbInputChange event will trigger with TransportModeFeedbackEventId. | |
| UsbHotKey |
Property retuns DmNvxUsbHotKey object.
This property is supported by DM-NVX-36X(C) family devices, DMPS-4200, and trigger UsbHotKeyPropertyChange event with UsbInputEventIds. . | |
| UserSpecifiedObject | Can be assigned anything that user wants. |