Click or drag to resize

DmNvxUsbInput Class

USB Input class for DM Devices. USB Input is supported for DM-NVX-350,DM-NVX-351,DM-NVX-350C,DM-NVX-351C,DM-NNX-352, DM-NNX-352C and DMPS-4200 only

This class will trigger UsbInputChange event.

Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.DM.EndpointsDmNvxUsbInput

Namespace: Crestron.SimplSharpPro.DM.Endpoints
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public sealed class DmNvxUsbInput : IParentInformation

The DmNvxUsbInput type exposes the following members.

Properties
 NameDescription
Public propertyAutomaticUsbPairingDisabledFeedback Property to indicate automatic usb 2.0 pairing is disabled.

This property is not supported by DMPS-4200 device.

The UsbInputChange event will trigger with AutomaticPairingDisabledFeedbackEventId.

Public propertyAutomaticUsbPairingEnabledFeedback Property to indicate automatic usb 2.0 pairing is enabled.

This property is not supported by DMPS-4200 device.

The UsbInputChange event will trigger with AutomaticPairingEnabledFeedbackEventId.

Public propertyHostSelection Property to select which USB-C port is the Host. Remote devices enumerate to the PC connected to the Host port. UsbFollowsVideo shall have the following behavior: USB Host automatically switches to active video source. This is for when 2 PCs are connected to HDMI for video and to USB-C for USB data only. IF HDMI 1 video selected, USB HOST = USB-C 1 IF HDMI 2 video selected, USB HOST = USB-C 2 IF USB-C 1 video selected, USB HOST = USB-C 1 IF USB-C 2 video selected, USB HOST = USB-C 2 Note: This setting only applies when USB mode is set to LOCAL. If this property is not supported then UsbFollowsVideo will be returned and write to this property will be ignored.
Public propertyHostSelectionFeedback Property to report the current Host USB-C port. Remote devices enumerate to the PC connected to the Host port. UsbFollowsVideo shall have the following behavior: USB Host automatically switches to active video source. This is for when 2 PCs are connected to HDMI for video and to USB-C for USB data only. IF HDMI 1 video selected, USB HOST = USB-C 1 IF HDMI 2 video selected, USB HOST = USB-C 2 IF USB-C 1 video selected, USB HOST = USB-C 1 IF USB-C 2 video selected, USB HOST = USB-C 2 Note: This setting only applies when USB mode is set to LOCAL. If this property is not supported then UsbFollowsVideo will be returned.

The UsbInputChange event will trigger with HostSelectionFeedbackEventId.

Public propertyLocalDeviceIdFeedback Property to report the ID of the local Icron device (last 6 digits of the NVX's MAC address.)

The UsbInputChange event will trigger with LocalDeviceIdFeedbackEventId.

Public propertyLocalDeviceIpAddrFeedback Property to report the IP address of the local device.

The UsbInputChange event will trigger with LocalDeviceIpAddrFeedbackEventId.

Public propertyMode Property to select the mode of the Icron device. If this property is not supported then Local will be returned and write to this property will be ignored.
Public propertyModeFeedback Property to report the current mode of the Icron device. If this property is not supported then Local will be returned.

The UsbInputChange event will trigger with ModeFeedbackEventId.

Public propertyMultipleUsbDeviceDisabledFeedback Property to indicate Multiple usb 2.0 pairing is disabled.

This property is not supported by DMPS-4200 device.

The UsbInputChange event will trigger with MultipleUsbDeviceDisabledFeedbackEventId.

Public propertyMultipleUsbDeviceEnabledFeedback Property to indicate multiple usb 2.0 pairing is enabled.

This property is not supported by DMPS-4200 device.

The UsbInputChange event will trigger with MultipleUsbDeviceEnabledFeedbackEventId.

Public propertyPairedFeedbackObsolete.
Property to indicate that the device is paired with the device defined in RemoteDeviceId.
Public propertyPairFeedback Property to indicate that the device is paired with the device defined in RemoteDeviceId.

The UsbInputChange event will trigger with PairedEventId and Index will indicate the index into the PairFeedback collection.

This property is not supported by DMPS-4200 device.

Public propertyParent The parent that a DmNvxUsbInput object was added to.
Public propertyRemoteDeviceId Property to specify the remote device to which the Icron device should attempt to pair.
Public propertyRemoteDeviceIdFeedback Property to report the device to which the device is paired. If the device is Crestron device, it reports only the last six digits of the MAC address with no separators. If the device is a non-Crestron device, it reports all 12 digits without the separators.

The UsbInputChange event will trigger with RemoteDeviceIdFeedbackEventId.

Note: This property is equivalent to first index of RemoteDeviceIdFeedbacks collection.

Public propertyRemoteDeviceIdFeedbacks Property to report the device to which the device is paired. If the device is Crestron device, it reports only the last six digits of the MAC address with no separators. If the device is a non-Crestron device, it reports all 12 digits without the separators.

The UsbInputChange event will trigger with RemoteDeviceIdFeedbackEventId and Index will indicate the index into the RemoteDeviceIdFeedback collection.

Public propertyRemoteDeviceIds Collection of remote device IDs. Property to specify the remote device to which the Icron device should attempt to pair.
Public propertyRemoteDeviceIpAddr Property to set the IP address of the device to which the device is paired.
Public propertyRemoteDeviceIpAddrFeedback Property to report the IP address of the device to which the device is paired.

The UsbInputChange event will trigger with RemoteDeviceIpAddrFeedbackEventId.

Public propertyStatusFeedback Property to report any errors including but not limited to:

The UsbInputChange event will trigger with StatusFeedbackEventId If this property is not supported then NA will be returned.

Public propertyTransportMode Property to set the transport mode of the Icron device. If this property is not supported then Layer2 will be returned and write to this property will be ignored.
Public propertyTransportModeFeedback Property to report the transport mode of the Icron device. If this property is not supported then Layer2 will be returned.

The UsbInputChange event will trigger with TransportModeFeedbackEventId.

Public propertyUsbHotKey Property retuns DmNvxUsbHotKey object.

This property is supported by DM-NVX-36X(C) family devices, DMPS-4200, and trigger UsbHotKeyPropertyChange event with UsbInputEventIds.

.
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
Top
Methods
 NameDescription
Public methodAutomaticUsbPairingDisabled Method to Disable automatic usb 2.0 pairing.

This property is not supported by DMPS-4200 device.

AutomaticUsbPairingDisabledFeedback should be true, else it should be false.
Public methodAutomaticUsbPairingEnabled Method to enable automatic usb 2.0 pairing.

This property is not supported by DMPS-4200 device.

AutomaticUsbPairingEnabledFeedback should be true, else it should be false.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodMultipleUsbDeviceDisabled Method to disable multiple device support for usb 2.0 pairing. When disabled, customers will only be able to pair a single device to a single host.

This method is not supported by DMPS-4200 device.

MultipleUsbDeviceDisabledFeedback should be true, else it should be false.
Public methodMultipleUsbDeviceEnabled Method to enable muliple device support for usb 2.0 pairing. If enabled, then customers will be able to connect multiple remote devices to a single local device. A hub must be used to connect the device to a USB Port. MultipleUsbDeviceEnabledFeedback should be true, else it should be false.

This method is not supported by DMPS-4200 device.

Public methodPair Method to pair the device with the device defined in RemoteDeviceId.

This property is not supported by DMPS-4200 device.

If pairing table contains 1 or more entries, PairFeedback should be true, else it should be false.
Public methodRemovePairing Method to remove any pairing the in the devices pairing table.

This method is not supported by DMPS-4200 device.

Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Top
Events
 NameDescription
Public eventUsbInputChange Event triggered when a feedback has changed for this DmNvxUsbInput.
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also