Click or drag to resize

Swamp Properties

The Swamp type exposes the following members.

Properties
 NameDescription
Public propertyAllZonesDoorbellAudioOnFeedback Indicates that the doorbell source is selected for all doorbell enabled zones as long as the property is true. A false indicates that normal source is selected for all doorbell enabled zones

The BaseEvent event will trigger with AllZonesDoorbellAudioOnFeedbackEventId.

Public propertyAllZonesDoorbellSource Property to set the source used when doorbell audio is enabled. Valid ranges are 0 (Disabled) to 24. This is supported in device firmware versions 4.002.278600000 and higher.
Public propertyAllZonesDoorbellSourceSelectedFeedback Property to indicate the source used when doorbell audio is enabled.

The BaseEvent event will trigger with AllZonesDoorbellAudioSourceEventId.

This is supported in device firmware versions 4.002.278600000 and higher.
Public propertyAllZonesOffFeedback Indicates that all zones are off. The output is true for as long as all zones are turned off.

The BaseEvent event will trigger with AllZonesOffFeedbackEventId.

Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyExpanders Collection of Expanders for this Swamp Processor.
Public propertyExpanderTypeFeedback Collection of the eExpanderTypes which are plugged into the unit.

The BaseEvent event will trigger with ExpanderTypeFeedbackEventId with Index is set to Number.

Public propertyExtenderDeviceReadyReservedCues Property to access the Device Ready functionality of the Swamp.

This property will trigger DeviceExtenderSigChange event.

Public propertyFrontPanelLockedFeedback Indicates the lock status of the front panel. The output is true for as long as the buttons are locked out; when false, this indicates that the front panel is not locked.

The BaseEvent event will trigger with FrontPanelLockedFeedbackEventId.

Public propertyFrontPanelSwitchOnFeedback Indicates that the amplifier is turned on (front panel power switch is set to the On position).

The BaseEvent event will trigger with FrontPanelSwitchOnFeedbackEventId.

Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyMuteAllZonesFeedback Indicates the mute state of all zones from the Swamp and connected Expanders that have sources routed. When true, all zones with sources routed are muted. When false, at least one of the zones with routed sources is not muted, or all zones are off.

The BaseEvent event will trigger with MuteAllZonesFeedbackEventId.

Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNumberOfExpanders The maximum number of Expanders allowed on this Swamp.
Public propertyNumberOfInputSources The maximum number of Input Sources allowed on this Swamp.
Public propertyNumberOfOutputZones The maximum number of Output AmplifiedZones allowed on this Swamp.
Public propertyNumberOfSpdifOutputs The maximum number of Spdif Outputs allowed on this Swamp.
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertySignalPresent Indicates whether a signal is present at the input specified by SignalPresentSource.

The BaseEvent event will trigger with SignalPresentEventId.

Public propertySignalPresentSource Selects the input number that will be monitored by the SignalPresent Output. Valid values: 0 = Disable monitoring, 1 through 16 = Analog 1 through Analog 16, 17 through 24 = SPDIF 17 through SPDIF 24
Public propertySignalPresentSourceFeedback Reports the input number being monitored by the SignalPresentSource.

The BaseEvent event will trigger with SignalPresentSourceFeedbackEventId.

Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySources Collection of Source properties for this Swamp Processor.
Public propertySpdifOuts Collection of Spdifs for this Swamp Processor.
Public propertyTemperatureFeedback When temperature reporting is enabled, this output reports the internal amplifier temperature.

The BaseEvent event will trigger with TemperatureFeedbackEventId.

Public propertyTemperatureFormat Sets the format for internal amp temperature reporting. When false, the format is set to Fahrenheit; when true, Celsius.
Public propertyTemperatureFormatFeedback Indicates the temperature format. The output is true for as long as the format is set to Celsius. When the output is false, this indicates that the format is set to Fahrenheit.

The BaseEvent event will trigger with TemperatureFormatFeedbackEventId.

Public propertyTemperatureHighFeedback Indicates a temperature fault in the amp.

The BaseEvent event will trigger with TemperatureHighFeedbackEventId.

Public propertyTemperatureReportingEnabledFeedback Indicates the status of temperature reporting. The output is true for as long as temperature reporting is enabled; when false, this indicates that temperature reporting is disabled.

The BaseEvent event will trigger with TemperatureReportingEnabledFeedbackEventId.

Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Public propertyZones Collection of AmplifiedZones for this Swamp Processor.
Top
See Also