Amplified |
This class will trigger ZoneChangeEvent when a part of a Expander or ZoneChangeEvent when a part of a Swamp.
public class AmplifiedZone : Zone
The AmplifiedZone type exposes the following members.
| Name | Description | |
|---|---|---|
| Balance |
Sets the audio balance.
Valid values range from -50% to +50%. A value of 0% signifies an even balance between left and right.
(Inherited from Zone) | |
| BalanceFeedback |
Reports the audio balance.
The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Bass |
Sets the bass level.
Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| BassFeedback |
Tracks the value of the corresponding bass integer input.
The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| BridgedFeedback |
Indicates the bridging status of the zone.
The ZoneChangeEvent event will trigger with BridgedFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BridgedFeedbackEventId when this Zone is a part of a Swamp. | |
| ClippingFeedbackFeedback |
Indicates that the signal level has begun to clip. This signifies a signal level that is too hot.
The ZoneChangeEvent event will trigger with ClippingFeedbackFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with ClippingFeedbackFeedbackEventId when this Zone is a part of a Swamp. | |
| CrestronDrcOnFeedback |
Indicates the DRC status. The output is true when DRC is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| DCOffsetFeedback |
Indicates a DC fault. If this Feedback is true, the amp will shut down.
The ZoneChangeEvent event will trigger with DCOffsetFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DCOffsetFeedbackEventId when this Zone is a part of a Swamp. | |
| DoorbellFeedback |
Indicates the Doorbell mode for this zone. The output is true when doorbell mode is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| DoorbellVolume |
Sets the doorbell volume level.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
This is supported in device firmware versions 4.002.278600000 and higher.
(Inherited from Zone) | |
| DoorbellVolumeFeedback |
Reports the doorbell volume level.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
This is supported in device firmware versions 4.002.278600000 and higher.
The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| EQSelection |
Sets the tone profile, which sets the bass and treble to pre-defined levels.
(Inherited from Zone) | |
| EqSelectionFeedback |
Reports the currently active tone profile with a return type of eEQSelection.
The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| IsAmplified |
Indicates if the Zone is Amplified or not.
(Inherited from Zone) | |
| LoudnessOnFeedback |
Indicates the status of the loudness function. The output is true when loudness is on.
When false, this indicates that loudness is off.
The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MaxVolume |
Defines the maximum volume. This allows endpoints to be set for volume control.
(Inherited from Zone) | |
| MaxVolumeFeedback |
Reports the Max volume.
The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MinVolume |
Defines the minimum volume. This allows endpoints to be set for volume control.
(Inherited from Zone) | |
| MinVolumeFeedback |
Reports the Min volume.
The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MonoOnFeedback |
Indicates the mono status of the zone. The output is true when zone audio is set to mono.
When false, this indicates stereo audio.
The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MuteOnFeedback |
Indicates the current mute status. The output is true when mute is active.
When false, this indicates audio has resumed.
The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Name |
Sets the zone name. The string can consist of alphanumeric characters (20 characters max).
(Inherited from Zone) | |
| NightMode |
Selects the Night mode for the zone.
(Inherited from Zone) | |
| NightModeFeedback |
Indicates the current night mode.
This property will trigger OnZoneChange event with NightModeFeedbackEventId. (Inherited from Zone) | |
| Number |
This Number of the Zone.
(Inherited from Zone) | |
| OutputBusVolumeOffset |
Sets the volume offset.
The offset ranges from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| OutputBusVolumeOffsetFeedback |
Reports the output bus volume offset.
The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| OverCurrentFeedback |
Indicates an Over Current fault.
The amplifier will ignore brief (less than 5 seconds) Over Current conditions,
but if the fault persists the output feedback will be triggered and the amp channel will shut down.
The ZoneChangeEvent event will trigger with OverCurrentFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with OverCurrentFeedbackEventId when this Zone is a part of a Swamp. | |
| OverOrUnderVoltageFeedback |
Indicates a voltage fault.
An over/under voltage fault indicates that the AC line voltage level is over or under the required level for more than 5 seconds.
The ZoneChangeEvent event will trigger with OverOrUnderVoltageFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with OverOrUnderVoltageFeedbackEventId when this Zone is a part of a Swamp. | |
| Source |
Select the source to switch to a particular zone, where 1 to 24 are valid for Analog and SPDIF sources.
(Inherited from Zone) | |
| SourceFeedback |
Reports the currently active source.
The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| SpeakerProtectOnFeedback |
Indicates the status of speaker protection on this Zone.
The ZoneChangeEvent event will trigger with SpeakerProtectOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with SpeakerProtectOnFeedbackEventId when this Zone is a part of a Swamp. | |
| StartupVolume |
Sets the startup volume.
This is the default volume that will be applied as the switcher transitions from no source selected (0) to a source being routed (1-24).
(Inherited from Zone) | |
| StartupVolumeFeedback |
Reports the startup volume.
The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| ToneProfile |
Selects the Tone profile for the zone.
(Inherited from Zone) | |
| ToneProfileFeedback |
Indicates the current Tone profile.
This property will trigger OnZoneChange event with ToneProfileFeedbackEventId. (Inherited from Zone) | |
| Treble |
Sets the treble level.
Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| TrebleFeedback |
Tracks the value of the corresponding treble integer input.
The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Volume |
Sets the Zone volume level.
Valid values range from 0% to 100%. where 0% = 0 and 100% = 65535.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
(Inherited from Zone) | |
| VolumedBFeedback |
Reports the actual volume level in decibels.
Reported values will range from -800 (-80dB) to +200 (+20dB), where 1 = 0.1dB.
The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| VolumeFeedback |
Reports the volume level.
Reported values range from 0 to 100%. where 0% = 0 and 100% = 65535.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) |
| Name | Description | |
|---|---|---|
| CrestronDRCOff |
Disables the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio.
(Inherited from Zone) | |
| CrestronDRCOn |
Applies the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio.
Dynamic range control reduces loud peaks in sound while raising the level of quiet sounds.
(Inherited from Zone) | |
| DoorbellEnableOff |
Method to disable the doorbell mode for this zone.
This is supported in device firmware versions 4.002.278600000 and higher
(Inherited from Zone) | |
| DoorbellEnableOn |
Method to enable the doorbell mode for this zone.
This is supported in device firmware versions 4.002.278600000 and higher
(Inherited from Zone) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LoudnessOff |
Method to disable the zone's loudness function.
(Inherited from Zone) | |
| LoudnessOn |
Method to enable zone's loudness function.
When loudness is active, this adds a bass gain of +10dB and a treble gain of +5dB.
(Inherited from Zone) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MonoOff |
Method to set zone's audio to stereo.
(Inherited from Zone) | |
| MonoOn |
Method to set the zone's audio to mono.
(Inherited from Zone) | |
| MuteOff |
Method to unmute the zone's audio.
(Inherited from Zone) | |
| MuteOn |
Method to mute the zone's audio.
(Inherited from Zone) | |
| SpeakerProtectOff | Turns speaker protection off. | |
| SpeakerProtectOn | Turns speaker protection on. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |